new file mode 100644
@@ -0,0 +1,125 @@
+{
+ "version": "1.0",
+ "description": "TI Processor SDK v11.00.05.02-am62lxx",
+ "sources": {
+ "oe-layersetup": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.ti.com/git/arago-project/oe-layersetup.git"
+ }
+ },
+ "rev": "master"
+ },
+ "path": "oe-layersetup"
+ },
+ "bitbake": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.openembedded.org/bitbake"
+ }
+ },
+ "rev": "2.8"
+ },
+ "path": "bitbake"
+ },
+ "meta-tisdk": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://github.com/TexasInstruments/meta-tisdk.git"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-tisdk"
+ },
+ "meta-arago": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.yoctoproject.org/meta-arago"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-arago"
+ },
+ "meta-virtualization": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.yoctoproject.org/meta-virtualization"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-virtualization"
+ },
+ "meta-openembedded": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.openembedded.org/meta-openembedded"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-openembedded"
+ },
+ "meta-ti": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.yoctoproject.org/meta-ti"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-ti"
+ },
+ "meta-arm": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.yoctoproject.org/meta-arm"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-arm"
+ },
+ "meta-clang": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://github.com/kraj/meta-clang"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "meta-clang"
+ },
+ "oe-core": {
+ "git-remote": {
+ "remotes": {
+ "origin": {
+ "uri": "https://git.openembedded.org/openembedded-core"
+ }
+ },
+ "rev": "scarthgap"
+ },
+ "path": "oe-core"
+ }
+ },
+ "configuration": {
+ "bitbake-setup": {
+ "default": {
+ "description": "Default build configuration",
+ "template": "oe-layersetup-processor-sdk_processor-sdk-11.00.05.02-am62lxx-config",
+ "targets": [ "bitbake -k tisdk-default-image" ]
+ }
+ }
+ }
+}
new file mode 100644
@@ -0,0 +1,31 @@
+# This template file was created by taking the oe-core/meta/conf/bblayers.conf
+# file and removing the BBLAYERS section at the end.
+
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "5"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/../meta-tisdk
+ ##OEROOT##/../meta-arago/meta-arago-distro
+ ##OEROOT##/../meta-arago/meta-arago-extras
+ ##OEROOT##/../meta-arago/meta-arago-test
+ ##OEROOT##/../meta-virtualization
+ ##OEROOT##/../meta-openembedded/meta-networking
+ ##OEROOT##/../meta-openembedded/meta-python
+ ##OEROOT##/../meta-openembedded/meta-oe
+ ##OEROOT##/../meta-openembedded/meta-gnome
+ ##OEROOT##/../meta-openembedded/meta-filesystems
+ ##OEROOT##/../meta-openembedded/meta-multimedia
+ ##OEROOT##/../meta-ti/meta-ti-extras
+ ##OEROOT##/../meta-ti/meta-beagle
+ ##OEROOT##/../meta-ti/meta-ti-bsp
+ ##OEROOT##/../meta-arm/meta-arm
+ ##OEROOT##/../meta-arm/meta-arm-toolchain
+ ##OEROOT##/../meta-clang
+ ##OEROOT##/../oe-core/meta
+ ##OEROOT##/../oe-layersetup
+"
new file mode 100644
@@ -0,0 +1,22 @@
+
+### Shell environment set up for builds. ###
+
+You can now run 'bitbake <target>'
+
+If you have not set MACHINE in your local.conf you can run
+'MACHINE=xxxxx bitbake <target>'
+
+Common targets are:
+ tisdk-default-image
+ tisdk-base-image
+ tisdk-bootstrap-base-image
+ tisdk-bootstrap-image
+ tisdk-thinlinux-image
+ tisdk-tiny-image
+
+You can also run generated qemu images with a command like 'runqemu qemux86-64'.
+
+Other commonly useful commands are:
+ - 'devtool' and 'recipetool' handle common recipe tasks
+ - 'bitbake-layers' handles common layer tasks
+ - 'oe-pkgdata-util' handles common target package tasks
new file mode 100644
@@ -0,0 +1 @@
+TI Processor SDK v11.00.05.02-am62lxx
new file mode 100644
@@ -0,0 +1,175 @@
+# CONF_VERSION is increased each time build/conf/ changes incompatibly
+CONF_VERSION = "2"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code
+# tarballs from various upstream projects. This can take a while, particularly
+# if your network connection is slow. These are all stored in DL_DIR. When
+# wiping and rebuilding you can preserve this directory to speed up this part
+# of subsequent builds. This directory is safe to share between multiple builds
+# on the same machine too.
+DL_DIR = "${TOPDIR}/../downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built
+# output. This is done using "shared state" files which can be thought of as
+# cache objects and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would
+# regenerate from these files if no changes were made to the configuration.
+# If changes were made to the configuration, only shared state files where the
+# state was still valid would be used (done using checksums).
+SSTATE_DIR = "${TOPDIR}/sstate-cache"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which
+# can be used to accelerate build time. This variable can be used to configure
+# the system to search other mirror locations for these objects before it
+# builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp.
+# These would contain the sstate-cache results from previous builds (possibly
+# from other machines). This variable works like fetcher MIRRORS/PREMIRRORS
+# and points to the cache locations to check for the shared objects.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/ \n \
+#file://.* file:///some/local/dir/sstate/"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+TMPDIR = "${TOPDIR}/arago-tmp"
+
+# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be outside
+#DEPLOY_DIR = "${TOPDIR}/deploy"
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "arago"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to ipk:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specified the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host._
+# Supported values are i686 and x86_64
+SDKMACHINE ?= "x86_64"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only))
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats"
+
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+# By default the machine configuration file sets the IMAGE_FSTYPES. But if you
+# would like to add additional file system types you can uncomment the
+# following line and add the additional IMAGE_FSTYPES you want created
+# as part of the build flow. Some common types are listed below and you
+# can remove the ones you do not want.
+# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz tar.bz2 cpio"
+
+#
+# Parallelism Options
+#
+# These two options control how much parallelism BitBake should use. The first
+# option determines how many tasks bitbake should run in parallel:
+#
+# BB_NUMBER_THREADS ?= "1"
+#
+# The second option controls how many processes make should run in parallel when
+# running compile tasks:
+#
+# PARALLEL_MAKE ?= "-j 1"
+#
+# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
+# be appropriate for example
+#
+# NOTE: By default, bitbake will choose the number of processeors on your host
+# so you should not need to set this unless you are wanting to lower the number
+# allowed.
+#
+
+DISTRO = "arago"
+
+# Set terminal types by default it expects gnome-terminal
+# but we chose xterm
+TERMCMD = "${XTERM_TERMCMD}"
+TERMCMDRUN = "${XTERM_TERMCMDRUN}"
+
+# Don't generate the mirror tarball for SCM repos, the snapshot is enough
+BB_GENERATE_MIRROR_TARBALLS = "0"
+
+# Uncomment this to remove work directory after packaging to save disk space
+#INHERIT += "rm_work"
+
+# Keep one set of images by default
+RM_OLD_IMAGE = "1"
+
+# Enable local PR service for binary feeds
+PRSERV_HOST = "localhost:0"
+
+# Enable hash equiv server
+BB_SIGNATURE_HANDLER = "OEEquivHash"
+BB_HASHSERVE = "auto"
+
+# It is recommended to activate "buildhistory" for testing the PR service
+INHERIT += "buildhistory"
+BUILDHISTORY_COMMIT = "1"
new file mode 100644
@@ -0,0 +1,20 @@
+# This file takes repo entries in the format
+# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern]
+
+bitbake,https://git.openembedded.org/bitbake,2.8,f6635b32ab553e812fe7c05998ef05834fccd0f3
+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,11.00.05.02,layers=
+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,11.00.05,layers=meta-arago-distro:meta-arago-extras:meta-arago-test
+#meta-selinux,https://git.yoctoproject.org/meta-selinux,scarthgap,20f84653a1e3d5fce3985cacf3d604d24eb323be,layers=
+#meta-qt6,https://code.qt.io/yocto/meta-qt6.git,6.9,4982bb1819e3493f976a1ef867dbb0bd61272fff,layers=
+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,79673f5c67b022e7aadeb231872470295e5b9188,layers=
+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,4f11a12b2352bbdfafb6b7d956bf424af4992977,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia
+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,11.00.05,layers=meta-ti-extras:meta-beagle:meta-ti-bsp
+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,3cadb81ffaa9f03b92e302843cb22a9cd41df34b,layers=meta-arm:meta-arm-toolchain
+meta-clang,https://github.com/kraj/meta-clang,scarthgap,8c77b427408db01b8de4c04bd3d247c13c154f92,layers=
+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,fc46705cc629a151f85717a57f7d789de8fd9b64,layers=meta
+
+OECORELAYERCONF=./sample-files/bblayers.conf.sample
+OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample
+BITBAKE_INCLUSIVE_VARS=yes
+
+#LOCALCONF:DISTRO_FEATURES:append = " acl xattr pam selinux"
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,69 @@
+header:
+ version: 17
+ includes:
+ - ../templates/bblayers.conf.yml
+ - ../templates/local-arago64-v2.conf.yml
+
+target: tisdk-default-image
+
+repos:
+ meta-tisdk:
+ url: "https://github.com/TexasInstruments/meta-tisdk.git"
+ branch: "scarthgap"
+ commit: "11.00.05.02"
+
+ meta-arago:
+ url: "https://git.yoctoproject.org/meta-arago"
+ branch: "scarthgap"
+ commit: "11.00.05"
+ layers:
+ meta-arago-distro:
+ meta-arago-extras:
+ meta-arago-test:
+
+ meta-virtualization:
+ url: "https://git.yoctoproject.org/meta-virtualization"
+ branch: "scarthgap"
+ commit: "79673f5c67b022e7aadeb231872470295e5b9188"
+
+ meta-openembedded:
+ url: "https://git.openembedded.org/meta-openembedded"
+ branch: "scarthgap"
+ commit: "4f11a12b2352bbdfafb6b7d956bf424af4992977"
+ layers:
+ meta-networking:
+ meta-python:
+ meta-oe:
+ meta-gnome:
+ meta-filesystems:
+ meta-multimedia:
+
+ meta-ti:
+ url: "https://git.yoctoproject.org/meta-ti"
+ branch: "scarthgap"
+ commit: "11.00.05"
+ layers:
+ meta-ti-extras:
+ meta-beagle:
+ meta-ti-bsp:
+
+ meta-arm:
+ url: "https://git.yoctoproject.org/meta-arm"
+ branch: "scarthgap"
+ commit: "3cadb81ffaa9f03b92e302843cb22a9cd41df34b"
+ layers:
+ meta-arm:
+ meta-arm-toolchain:
+
+ meta-clang:
+ url: "https://github.com/kraj/meta-clang"
+ branch: "scarthgap"
+ commit: "8c77b427408db01b8de4c04bd3d247c13c154f92"
+
+ oe-core:
+ url: "https://git.openembedded.org/openembedded-core"
+ branch: "scarthgap"
+ commit: "fc46705cc629a151f85717a57f7d789de8fd9b64"
+ layers:
+ meta:
+
new file mode 100644
@@ -0,0 +1,63 @@
+<?xml version='1.0'?>
+<config>
+ <description>TI Processor SDK v11.00.05.02-am62lxx</description>
+
+ <xi:include href='../../common/targets_arago.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/>
+ <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/>
+ <xi:include href='../../templates/local-arago64-v2.conf.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/>
+
+ <bitbake url='https://git.openembedded.org/bitbake' branch='2.8' commit='f6635b32ab553e812fe7c05998ef05834fccd0f3'/>
+
+ <repos>
+ <repo name='meta-tisdk' url='https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap' commit='11.00.05.02'>
+ <layers/>
+ </repo>
+ <repo name='meta-arago' url='https://git.yoctoproject.org/meta-arago' branch='scarthgap' commit='11.00.05'>
+ <layers>
+ <layer>meta-arago-distro</layer>
+ <layer>meta-arago-extras</layer>
+ <layer>meta-arago-test</layer>
+ </layers>
+ </repo>
+ <repo name='meta-virtualization' url='https://git.yoctoproject.org/meta-virtualization' branch='scarthgap' commit='79673f5c67b022e7aadeb231872470295e5b9188'>
+ <layers/>
+ </repo>
+ <repo name='meta-openembedded' url='https://git.openembedded.org/meta-openembedded' branch='scarthgap' commit='4f11a12b2352bbdfafb6b7d956bf424af4992977'>
+ <layers>
+ <layer>meta-networking</layer>
+ <layer>meta-python</layer>
+ <layer>meta-oe</layer>
+ <layer>meta-gnome</layer>
+ <layer>meta-filesystems</layer>
+ <layer>meta-multimedia</layer>
+ </layers>
+ </repo>
+ <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti' branch='scarthgap' commit='11.00.05'>
+ <layers>
+ <layer>meta-ti-extras</layer>
+ <layer>meta-beagle</layer>
+ <layer>meta-ti-bsp</layer>
+ </layers>
+ </repo>
+ <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm' branch='scarthgap' commit='3cadb81ffaa9f03b92e302843cb22a9cd41df34b'>
+ <layers>
+ <layer>meta-arm</layer>
+ <layer>meta-arm-toolchain</layer>
+ </layers>
+ </repo>
+ <repo name='meta-clang' url='https://github.com/kraj/meta-clang' branch='scarthgap' commit='8c77b427408db01b8de4c04bd3d247c13c154f92'>
+ <layers/>
+ </repo>
+ <repo name='oe-core' url='https://git.openembedded.org/openembedded-core' branch='scarthgap' commit='fc46705cc629a151f85717a57f7d789de8fd9b64'>
+ <layers>
+ <layer>meta</layer>
+ </layers>
+ </repo>
+ </repos>
+
+ <tools>
+ <tool type='oe-layersetup'>
+ <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/>
+ </tool>
+ </tools>
+</config>
- Add new config files for the Processor SDK Linux 11.00.05.02 APL release for AM62L Signed-off-by: Telukula Jeevan Kumar Sahu <j-sahu@ti.com> --- ...cessor-sdk-11.00.05.02-am62lxx-config.json | 125 +++++++++++++ .../bblayers.conf.sample | 31 ++++ .../conf-notes.txt | 22 +++ .../conf-summary.txt | 1 + .../local.conf.sample | 175 ++++++++++++++++++ ...ocessor-sdk-11.00.05.02-am62lxx-config.txt | 20 ++ ...ocessor-sdk-11.00.05.02-am62lxx-config.yml | 69 +++++++ ...ocessor-sdk-11.00.05.02-am62lxx-config.xml | 63 +++++++ 8 files changed, 506 insertions(+) create mode 100644 bitbake-setup/processor-sdk_processor-sdk-11.00.05.02-am62lxx-config.json create mode 100644 conf/templates/processor-sdk_processor-sdk-11.00.05.02-am62lxx-config/bblayers.conf.sample create mode 100644 conf/templates/processor-sdk_processor-sdk-11.00.05.02-am62lxx-config/conf-notes.txt create mode 100644 conf/templates/processor-sdk_processor-sdk-11.00.05.02-am62lxx-config/conf-summary.txt create mode 100644 conf/templates/processor-sdk_processor-sdk-11.00.05.02-am62lxx-config/local.conf.sample create mode 100644 configs/processor-sdk/processor-sdk-11.00.05.02-am62lxx-config.txt create mode 100644 kas/processor-sdk/processor-sdk-11.00.05.02-am62lxx-config.yml create mode 100644 src/configs/processor-sdk/processor-sdk-11.00.05.02-am62lxx-config.xml