| Message ID | 20241219163417.4155600-1-c-shilwant@ti.com |
|---|---|
| State | Accepted |
| Delegated to: | Ryan Eatmon |
| Headers | show |
| Series | [meta-arago,oe-layersetup,master] processor-sdk: Add new configs for Sitara SDK 10.1 Release | expand |
After build processor-sdk-scarthgap-chromium-10.01.10.04-config, I noticed
the downloads directory has moved to the build/downloads folder, instead of
being at the top of the build directory. Was this intentional? I suspect
it probably happened when everything was converted to xml configs. But the
commit doesn't mention that as a known side effect.
commit aea8e0f53cb05e2d80056b3568f3376741c90853
Author: Ryan Eatmon <reatmon@ti.com>
Date: Thu Oct 10 11:43:57 2024 -0500
Initial conversion of new XML configs
...
-DL_DIR = "${OEBASE}/downloads"
+DL_DIR = "${TOPDIR}/downloads"
...
-SSTATE_DIR = "${OEBASE}/build/sstate-cache"
+SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
SSTATE_DIR was also updated and it still looks to be put in the same place
as ever...
On Thu, Dec 19, 2024 at 11:34 AM Chirag Shilwant via lists.yoctoproject.org
<c-shilwant=ti.com@lists.yoctoproject.org> wrote:
> - Add processor-sdk-scarthgap-10.01.10.04-config used for
> building AM62SIP & AM64x.
>
> - Add processor-sdk-scarthgap-chromium-10.01.10.04-config
> used for building AM62P, AM62x, AM62LP & Beagleplay.
>
> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
> ---
> ...ssor-sdk-scarthgap-10.01.10.04-config.json | 136 ++++++++++++++
> ...scarthgap-chromium-10.01.10.04-config.json | 158 ++++++++++++++++
> .../bblayers.conf.sample | 32 ++++
> .../conf-notes.txt | 22 +++
> .../conf-summary.txt | 1 +
> .../local.conf.sample | 175 ++++++++++++++++++
> .../bblayers.conf.sample | 34 ++++
> .../conf-notes.txt | 22 +++
> .../conf-summary.txt | 1 +
> .../local.conf.sample | 175 ++++++++++++++++++
> ...essor-sdk-scarthgap-10.01.10.04-config.txt | 17 ++
> ...-scarthgap-chromium-10.01.10.04-config.txt | 19 ++
> ...essor-sdk-scarthgap-10.01.10.04-config.yml | 74 ++++++++
> ...-scarthgap-chromium-10.01.10.04-config.yml | 86 +++++++++
> ...essor-sdk-scarthgap-10.01.10.04-config.xml | 66 +++++++
> ...-scarthgap-chromium-10.01.10.04-config.xml | 74 ++++++++
> 16 files changed, 1092 insertions(+)
> create mode 100644
> bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> create mode 100644
> bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> create mode 100644
> configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> create mode 100644
> configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> create mode 100644
> kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> create mode 100644
> kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> create mode 100644
> src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> create mode 100644
> src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
>
> diff --git
> a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> new file mode 100644
> index 0000000..f70e760
> --- /dev/null
> +++
> b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> @@ -0,0 +1,136 @@
> +{
> + "version": "1.0",
> + "description": "TI Processor SDK v10.01.10.04",
> + "sources": {
> + "oe-layersetup": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "
> https://git.ti.com/git/arago-project/oe-layersetup.git"
> + }
> + },
> + "rev": "master"
> + },
> + "path": "oe-layersetup"
> + },
> + "bitbake": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/bitbake"
> + }
> + },
> + "rev": "2.8"
> + },
> + "path": "bitbake"
> + },
> + "meta-tisdk": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/TexasInstruments/meta-tisdk.git"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-tisdk"
> + },
> + "meta-arago": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arago"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arago"
> + },
> + "meta-qt5": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/meta-qt5/meta-qt5.git"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-qt5"
> + },
> + "meta-virtualization": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-virtualization"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-virtualization"
> + },
> + "meta-openembedded": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/meta-openembedded"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-openembedded"
> + },
> + "meta-ti": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-ti"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-ti"
> + },
> + "meta-arm": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arm"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arm"
> + },
> + "meta-clang": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/kraj/meta-clang"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-clang"
> + },
> + "oe-core": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/openembedded-core"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "oe-core"
> + }
> + },
> + "configuration": {
> + "bitbake-setup": {
> + "default": {
> + "description": "Default build configuration",
> + "template":
> "oe-layersetup-processor-sdk_processor-sdk-scarthgap-10.01.10.04-config",
> + "targets": [ "bitbake -k tisdk-default-image" ]
> + }
> + }
> + }
> +}
> diff --git
> a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> new file mode 100644
> index 0000000..fa0a0bd
> --- /dev/null
> +++
> b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> @@ -0,0 +1,158 @@
> +{
> + "version": "1.0",
> + "description": "TI Processor SDK vchromium-10.01.10.04",
> + "sources": {
> + "oe-layersetup": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "
> https://git.ti.com/git/arago-project/oe-layersetup.git"
> + }
> + },
> + "rev": "master"
> + },
> + "path": "oe-layersetup"
> + },
> + "bitbake": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/bitbake"
> + }
> + },
> + "rev": "2.8"
> + },
> + "path": "bitbake"
> + },
> + "meta-tisdk": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/TexasInstruments/meta-tisdk.git"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-tisdk"
> + },
> + "meta-arago": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arago"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arago"
> + },
> + "meta-browser": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/OSSystems/meta-browser.git"
> + }
> + },
> + "rev": "master"
> + },
> + "path": "meta-browser"
> + },
> + "meta-qt5": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/meta-qt5/meta-qt5.git"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-qt5"
> + },
> + "meta-virtualization": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-virtualization"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-virtualization"
> + },
> + "meta-openembedded": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/meta-openembedded"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-openembedded"
> + },
> + "meta-ti": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-ti"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-ti"
> + },
> + "meta-arm": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arm"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arm"
> + },
> + "meta-clang": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/kraj/meta-clang"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-clang"
> + },
> + "oe-core": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/openembedded-core"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "oe-core"
> + },
> + "meta-edgeai": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.ti.com/git/edgeai/meta-edgeai.git"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-edgeai"
> + }
> + },
> + "configuration": {
> + "bitbake-setup": {
> + "default": {
> + "description": "Default build configuration",
> + "template":
> "oe-layersetup-processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config",
> + "targets": [ "bitbake -k tisdk-default-image" ]
> + }
> + }
> + }
> +}
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> new file mode 100644
> index 0000000..10bcf2d
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> @@ -0,0 +1,32 @@
> +# This template file was created by taking the
> oe-core/meta/conf/bblayers.conf
> +# file and removing the BBLAYERS section at the end.
> +
> +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
> +# changes incompatibly
> +LCONF_VERSION = "5"
> +
> +BBPATH = "${TOPDIR}"
> +BBFILES ?= ""
> +
> +BBLAYERS ?= " \
> + ##OEROOT##/../meta-tisdk
> + ##OEROOT##/../meta-arago/meta-arago-distro
> + ##OEROOT##/../meta-arago/meta-arago-extras
> + ##OEROOT##/../meta-arago/meta-arago-demos
> + ##OEROOT##/../meta-arago/meta-arago-test
> + ##OEROOT##/../meta-qt5
> + ##OEROOT##/../meta-virtualization
> + ##OEROOT##/../meta-openembedded/meta-networking
> + ##OEROOT##/../meta-openembedded/meta-python
> + ##OEROOT##/../meta-openembedded/meta-oe
> + ##OEROOT##/../meta-openembedded/meta-gnome
> + ##OEROOT##/../meta-openembedded/meta-filesystems
> + ##OEROOT##/../meta-openembedded/meta-multimedia
> + ##OEROOT##/../meta-ti/meta-ti-extras
> + ##OEROOT##/../meta-ti/meta-ti-bsp
> + ##OEROOT##/../meta-arm/meta-arm
> + ##OEROOT##/../meta-arm/meta-arm-toolchain
> + ##OEROOT##/../meta-clang
> + ##OEROOT##/../oe-core/meta
> + ##OEROOT##/../oe-layersetup
> +"
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> new file mode 100644
> index 0000000..1880460
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> @@ -0,0 +1,22 @@
> +
> +### Shell environment set up for builds. ###
> +
> +You can now run 'bitbake <target>'
> +
> +If you have not set MACHINE in your local.conf you can run
> +'MACHINE=xxxxx bitbake <target>'
> +
> +Common targets are:
> + tisdk-default-image
> + tisdk-base-image
> + tisdk-bootstrap-base-image
> + tisdk-bootstrap-image
> + tisdk-thinlinux-image
> + tisdk-tiny-image
> +
> +You can also run generated qemu images with a command like 'runqemu
> qemux86-64'.
> +
> +Other commonly useful commands are:
> + - 'devtool' and 'recipetool' handle common recipe tasks
> + - 'bitbake-layers' handles common layer tasks
> + - 'oe-pkgdata-util' handles common target package tasks
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> new file mode 100644
> index 0000000..5e1739a
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> @@ -0,0 +1 @@
> +TI Processor SDK v10.01.10.04
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> new file mode 100644
> index 0000000..7575b4b
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> @@ -0,0 +1,175 @@
> +# CONF_VERSION is increased each time build/conf/ changes incompatibly
> +CONF_VERSION = "2"
> +
> +#
> +# Where to place downloads
> +#
> +# During a first build the system will download many different source code
> +# tarballs from various upstream projects. This can take a while,
> particularly
> +# if your network connection is slow. These are all stored in DL_DIR. When
> +# wiping and rebuilding you can preserve this directory to speed up this
> part
> +# of subsequent builds. This directory is safe to share between multiple
> builds
> +# on the same machine too.
> +DL_DIR = "${TOPDIR}/downloads"
> +
> +#
> +# Where to place shared-state files
> +#
> +# BitBake has the capability to accelerate builds based on previously
> built
> +# output. This is done using "shared state" files which can be thought of
> as
> +# cache objects and this option determines where those files are placed.
> +#
> +# You can wipe out TMPDIR leaving this directory intact and the build
> would
> +# regenerate from these files if no changes were made to the
> configuration.
> +# If changes were made to the configuration, only shared state files
> where the
> +# state was still valid would be used (done using checksums).
> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> +
> +#
> +# Shared-state files from other locations
> +#
> +# As mentioned above, shared state files are prebuilt cache data objects
> which
> +# can be used to accelerate build time. This variable can be used to
> configure
> +# the system to search other mirror locations for these objects before it
> +# builds the data itself.
> +#
> +# This can be a filesystem directory, or a remote url such as http or ftp.
> +# These would contain the sstate-cache results from previous builds
> (possibly
> +# from other machines). This variable works like fetcher
> MIRRORS/PREMIRRORS
> +# and points to the cache locations to check for the shared objects.
> +#SSTATE_MIRRORS ?= "\
> +#file://.* http://someserver.tld/share/sstate/ \n \
> +#file://.* file:///some/local/dir/sstate/"
> +
> +#
> +# Where to place the build output
> +#
> +# This option specifies where the bulk of the building work should be
> done and
> +# where BitBake should place its temporary files and output. Keep in mind
> that
> +# this includes the extraction and compilation of many applications and
> the toolchain
> +# which can use Gigabytes of hard disk space.
> +TMPDIR = "${TOPDIR}/arago-tmp"
> +
> +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be
> outside
> +#DEPLOY_DIR = "${TOPDIR}/deploy"
> +
> +#
> +# Machine Selection
> +#
> +# You need to select a specific machine to target the build with. There
> are a selection
> +# of emulated machines available which can boot and run in the QEMU
> emulator:
> +#
> +#MACHINE ?= "arago"
> +
> +#
> +# Package Management configuration
> +#
> +# This variable lists which packaging formats to enable. Multiple package
> backends
> +# can be enabled at once and the first item listed in the variable will
> be used
> +# to generate the root filesystems.
> +# Options are:
> +# - 'package_deb' for debian style deb files
> +# - 'package_ipk' for ipk files are used by opkg (a debian style
> embedded package manager)
> +# - 'package_rpm' for rpm style packages
> +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
> +# We default to ipk:
> +PACKAGE_CLASSES ?= "package_ipk"
> +
> +#
> +# SDK/ADT target architecture
> +#
> +# This variable specified the architecture to build SDK/ADT items for and
> means
> +# you can build the SDK packages for architectures other than the machine
> you are
> +# running the build on (i.e. building i686 packages on an x86_64 host._
> +# Supported values are i686 and x86_64
> +SDKMACHINE ?= "x86_64"
> +
> +#
> +# Extra image configuration defaults
> +#
> +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to
> the generated
> +# images. Some of these options are added to certain image types
> automatically. The
> +# variable can contain the following options:
> +# "dbg-pkgs" - add -dbg packages for all installed packages
> +# (adds symbol information for debugging/profiling)
> +# "dev-pkgs" - add -dev packages for all installed packages
> +# (useful if you want to develop against libs in the
> image)
> +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
> +# "tools-debug" - add debugging tools (gdb, strace)
> +# "tools-profile" - add profiling tools (oprofile, exmap, lttng
> valgrind (x86 only))
> +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord
> etc.)
> +# "debug-tweaks" - make an image suitable for development
> +# e.g. ssh root access has a blank password
> +# There are other application targets that can be used here too, see
> +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more
> details.
> +# We default to enabling the debugging tweaks.
> +EXTRA_IMAGE_FEATURES = "debug-tweaks"
> +
> +#
> +# Additional image features
> +#
> +# The following is a list of additional classes to use when building
> images which
> +# enable extra features. Some available options which can be included in
> this variable
> +# are:
> +# - 'buildstats' collect build statistics
> +# - 'image-swab' to perform host system intrusion detection
> +# NOTE: mklibs also needs to be explicitly enabled for a given image, see
> local.conf.extended
> +USER_CLASSES ?= "buildstats"
> +
> +# By default disable interactive patch resolution (tasks will just fail
> instead):
> +PATCHRESOLVE = "noop"
> +
> +# By default the machine configuration file sets the IMAGE_FSTYPES. But
> if you
> +# would like to add additional file system types you can uncomment the
> +# following line and add the additional IMAGE_FSTYPES you want created
> +# as part of the build flow. Some common types are listed below and you
> +# can remove the ones you do not want.
> +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz
> tar.bz2 cpio"
> +
> +#
> +# Parallelism Options
> +#
> +# These two options control how much parallelism BitBake should use. The
> first
> +# option determines how many tasks bitbake should run in parallel:
> +#
> +# BB_NUMBER_THREADS ?= "1"
> +#
> +# The second option controls how many processes make should run in
> parallel when
> +# running compile tasks:
> +#
> +# PARALLEL_MAKE ?= "-j 1"
> +#
> +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j
> 4" would
> +# be appropriate for example
> +#
> +# NOTE: By default, bitbake will choose the number of processeors on your
> host
> +# so you should not need to set this unless you are wanting to lower the
> number
> +# allowed.
> +#
> +
> +DISTRO = "arago"
> +
> +# Set terminal types by default it expects gnome-terminal
> +# but we chose xterm
> +TERMCMD = "${XTERM_TERMCMD}"
> +TERMCMDRUN = "${XTERM_TERMCMDRUN}"
> +
> +# Don't generate the mirror tarball for SCM repos, the snapshot is enough
> +BB_GENERATE_MIRROR_TARBALLS = "0"
> +
> +# Uncomment this to remove work directory after packaging to save disk
> space
> +#INHERIT += "rm_work"
> +
> +# Keep one set of images by default
> +RM_OLD_IMAGE = "1"
> +
> +# Enable local PR service for binary feeds
> +PRSERV_HOST = "localhost:0"
> +
> +# Enable hash equiv server
> +BB_SIGNATURE_HANDLER = "OEEquivHash"
> +BB_HASHSERVE = "auto"
> +
> +# It is recommended to activate "buildhistory" for testing the PR service
> +INHERIT += "buildhistory"
> +BUILDHISTORY_COMMIT = "1"
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> new file mode 100644
> index 0000000..55a10df
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> @@ -0,0 +1,34 @@
> +# This template file was created by taking the
> oe-core/meta/conf/bblayers.conf
> +# file and removing the BBLAYERS section at the end.
> +
> +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
> +# changes incompatibly
> +LCONF_VERSION = "5"
> +
> +BBPATH = "${TOPDIR}"
> +BBFILES ?= ""
> +
> +BBLAYERS ?= " \
> + ##OEROOT##/../meta-tisdk
> + ##OEROOT##/../meta-arago/meta-arago-distro
> + ##OEROOT##/../meta-arago/meta-arago-extras
> + ##OEROOT##/../meta-arago/meta-arago-demos
> + ##OEROOT##/../meta-arago/meta-arago-test
> + ##OEROOT##/../meta-browser/meta-chromium
> + ##OEROOT##/../meta-qt5
> + ##OEROOT##/../meta-virtualization
> + ##OEROOT##/../meta-openembedded/meta-networking
> + ##OEROOT##/../meta-openembedded/meta-python
> + ##OEROOT##/../meta-openembedded/meta-oe
> + ##OEROOT##/../meta-openembedded/meta-gnome
> + ##OEROOT##/../meta-openembedded/meta-filesystems
> + ##OEROOT##/../meta-openembedded/meta-multimedia
> + ##OEROOT##/../meta-ti/meta-ti-extras
> + ##OEROOT##/../meta-ti/meta-ti-bsp
> + ##OEROOT##/../meta-arm/meta-arm
> + ##OEROOT##/../meta-arm/meta-arm-toolchain
> + ##OEROOT##/../meta-clang
> + ##OEROOT##/../oe-core/meta
> + ##OEROOT##/../meta-edgeai
> + ##OEROOT##/../oe-layersetup
> +"
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> new file mode 100644
> index 0000000..1880460
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> @@ -0,0 +1,22 @@
> +
> +### Shell environment set up for builds. ###
> +
> +You can now run 'bitbake <target>'
> +
> +If you have not set MACHINE in your local.conf you can run
> +'MACHINE=xxxxx bitbake <target>'
> +
> +Common targets are:
> + tisdk-default-image
> + tisdk-base-image
> + tisdk-bootstrap-base-image
> + tisdk-bootstrap-image
> + tisdk-thinlinux-image
> + tisdk-tiny-image
> +
> +You can also run generated qemu images with a command like 'runqemu
> qemux86-64'.
> +
> +Other commonly useful commands are:
> + - 'devtool' and 'recipetool' handle common recipe tasks
> + - 'bitbake-layers' handles common layer tasks
> + - 'oe-pkgdata-util' handles common target package tasks
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> new file mode 100644
> index 0000000..18049f6
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> @@ -0,0 +1 @@
> +TI Processor SDK vchromium-10.01.10.04
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> new file mode 100644
> index 0000000..7575b4b
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> @@ -0,0 +1,175 @@
> +# CONF_VERSION is increased each time build/conf/ changes incompatibly
> +CONF_VERSION = "2"
> +
> +#
> +# Where to place downloads
> +#
> +# During a first build the system will download many different source code
> +# tarballs from various upstream projects. This can take a while,
> particularly
> +# if your network connection is slow. These are all stored in DL_DIR. When
> +# wiping and rebuilding you can preserve this directory to speed up this
> part
> +# of subsequent builds. This directory is safe to share between multiple
> builds
> +# on the same machine too.
> +DL_DIR = "${TOPDIR}/downloads"
> +
> +#
> +# Where to place shared-state files
> +#
> +# BitBake has the capability to accelerate builds based on previously
> built
> +# output. This is done using "shared state" files which can be thought of
> as
> +# cache objects and this option determines where those files are placed.
> +#
> +# You can wipe out TMPDIR leaving this directory intact and the build
> would
> +# regenerate from these files if no changes were made to the
> configuration.
> +# If changes were made to the configuration, only shared state files
> where the
> +# state was still valid would be used (done using checksums).
> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> +
> +#
> +# Shared-state files from other locations
> +#
> +# As mentioned above, shared state files are prebuilt cache data objects
> which
> +# can be used to accelerate build time. This variable can be used to
> configure
> +# the system to search other mirror locations for these objects before it
> +# builds the data itself.
> +#
> +# This can be a filesystem directory, or a remote url such as http or ftp.
> +# These would contain the sstate-cache results from previous builds
> (possibly
> +# from other machines). This variable works like fetcher
> MIRRORS/PREMIRRORS
> +# and points to the cache locations to check for the shared objects.
> +#SSTATE_MIRRORS ?= "\
> +#file://.* http://someserver.tld/share/sstate/ \n \
> +#file://.* file:///some/local/dir/sstate/"
> +
> +#
> +# Where to place the build output
> +#
> +# This option specifies where the bulk of the building work should be
> done and
> +# where BitBake should place its temporary files and output. Keep in mind
> that
> +# this includes the extraction and compilation of many applications and
> the toolchain
> +# which can use Gigabytes of hard disk space.
> +TMPDIR = "${TOPDIR}/arago-tmp"
> +
> +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be
> outside
> +#DEPLOY_DIR = "${TOPDIR}/deploy"
> +
> +#
> +# Machine Selection
> +#
> +# You need to select a specific machine to target the build with. There
> are a selection
> +# of emulated machines available which can boot and run in the QEMU
> emulator:
> +#
> +#MACHINE ?= "arago"
> +
> +#
> +# Package Management configuration
> +#
> +# This variable lists which packaging formats to enable. Multiple package
> backends
> +# can be enabled at once and the first item listed in the variable will
> be used
> +# to generate the root filesystems.
> +# Options are:
> +# - 'package_deb' for debian style deb files
> +# - 'package_ipk' for ipk files are used by opkg (a debian style
> embedded package manager)
> +# - 'package_rpm' for rpm style packages
> +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
> +# We default to ipk:
> +PACKAGE_CLASSES ?= "package_ipk"
> +
> +#
> +# SDK/ADT target architecture
> +#
> +# This variable specified the architecture to build SDK/ADT items for and
> means
> +# you can build the SDK packages for architectures other than the machine
> you are
> +# running the build on (i.e. building i686 packages on an x86_64 host._
> +# Supported values are i686 and x86_64
> +SDKMACHINE ?= "x86_64"
> +
> +#
> +# Extra image configuration defaults
> +#
> +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to
> the generated
> +# images. Some of these options are added to certain image types
> automatically. The
> +# variable can contain the following options:
> +# "dbg-pkgs" - add -dbg packages for all installed packages
> +# (adds symbol information for debugging/profiling)
> +# "dev-pkgs" - add -dev packages for all installed packages
> +# (useful if you want to develop against libs in the
> image)
> +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
> +# "tools-debug" - add debugging tools (gdb, strace)
> +# "tools-profile" - add profiling tools (oprofile, exmap, lttng
> valgrind (x86 only))
> +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord
> etc.)
> +# "debug-tweaks" - make an image suitable for development
> +# e.g. ssh root access has a blank password
> +# There are other application targets that can be used here too, see
> +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more
> details.
> +# We default to enabling the debugging tweaks.
> +EXTRA_IMAGE_FEATURES = "debug-tweaks"
> +
> +#
> +# Additional image features
> +#
> +# The following is a list of additional classes to use when building
> images which
> +# enable extra features. Some available options which can be included in
> this variable
> +# are:
> +# - 'buildstats' collect build statistics
> +# - 'image-swab' to perform host system intrusion detection
> +# NOTE: mklibs also needs to be explicitly enabled for a given image, see
> local.conf.extended
> +USER_CLASSES ?= "buildstats"
> +
> +# By default disable interactive patch resolution (tasks will just fail
> instead):
> +PATCHRESOLVE = "noop"
> +
> +# By default the machine configuration file sets the IMAGE_FSTYPES. But
> if you
> +# would like to add additional file system types you can uncomment the
> +# following line and add the additional IMAGE_FSTYPES you want created
> +# as part of the build flow. Some common types are listed below and you
> +# can remove the ones you do not want.
> +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz
> tar.bz2 cpio"
> +
> +#
> +# Parallelism Options
> +#
> +# These two options control how much parallelism BitBake should use. The
> first
> +# option determines how many tasks bitbake should run in parallel:
> +#
> +# BB_NUMBER_THREADS ?= "1"
> +#
> +# The second option controls how many processes make should run in
> parallel when
> +# running compile tasks:
> +#
> +# PARALLEL_MAKE ?= "-j 1"
> +#
> +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j
> 4" would
> +# be appropriate for example
> +#
> +# NOTE: By default, bitbake will choose the number of processeors on your
> host
> +# so you should not need to set this unless you are wanting to lower the
> number
> +# allowed.
> +#
> +
> +DISTRO = "arago"
> +
> +# Set terminal types by default it expects gnome-terminal
> +# but we chose xterm
> +TERMCMD = "${XTERM_TERMCMD}"
> +TERMCMDRUN = "${XTERM_TERMCMDRUN}"
> +
> +# Don't generate the mirror tarball for SCM repos, the snapshot is enough
> +BB_GENERATE_MIRROR_TARBALLS = "0"
> +
> +# Uncomment this to remove work directory after packaging to save disk
> space
> +#INHERIT += "rm_work"
> +
> +# Keep one set of images by default
> +RM_OLD_IMAGE = "1"
> +
> +# Enable local PR service for binary feeds
> +PRSERV_HOST = "localhost:0"
> +
> +# Enable hash equiv server
> +BB_SIGNATURE_HANDLER = "OEEquivHash"
> +BB_HASHSERVE = "auto"
> +
> +# It is recommended to activate "buildhistory" for testing the PR service
> +INHERIT += "buildhistory"
> +BUILDHISTORY_COMMIT = "1"
> diff --git
> a/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> new file mode 100644
> index 0000000..b1281e5
> --- /dev/null
> +++ b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> @@ -0,0 +1,17 @@
> +# This file takes repo entries in the format
> +# repo name,repo uri,repo branch,repo
> commit[,layers=layer1:layer2...:layern]
> +
> +bitbake,
> https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf
>
> +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=
>
> +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test
>
> +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=
>
> +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=
>
> +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia
>
> +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp
>
> +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain
>
> +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=
>
> +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta
> <https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test+meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain+meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta>
> +
> +OECORELAYERCONF=./sample-files/bblayers.conf.sample
> +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample
> +BITBAKE_INCLUSIVE_VARS=yes
> diff --git
> a/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> new file mode 100644
> index 0000000..5372ca8
> --- /dev/null
> +++
> b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> @@ -0,0 +1,19 @@
> +# This file takes repo entries in the format
> +# repo name,repo uri,repo branch,repo
> commit[,layers=layer1:layer2...:layern]
> +
> +bitbake,
> https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf
>
> +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=
>
> +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test
>
> +meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium
>
> +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=
>
> +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=
>
> +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia
>
> +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp
>
> +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain
>
> +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=
>
> +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta
>
> +meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers=
> <https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test+meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium+meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain+meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta+meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers=>
> +
> +OECORELAYERCONF=./sample-files/bblayers.conf.sample
> +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample
> +BITBAKE_INCLUSIVE_VARS=yes
> diff --git
> a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> new file mode 100644
> index 0000000..2dc2f5c
> --- /dev/null
> +++ b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> @@ -0,0 +1,74 @@
> +header:
> + version: 17
> + includes:
> + - ../templates/bblayers.conf.yml
> + - ../templates/local-arago64-v2.conf.yml
> +
> +target: tisdk-default-image
> +
> +repos:
> + meta-tisdk:
> + url: "https://github.com/TexasInstruments/meta-tisdk.git"
> + branch: "scarthgap"
> + commit: "10.01.10.04"
> +
> + meta-arago:
> + url: "https://git.yoctoproject.org/meta-arago"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-arago-distro:
> + meta-arago-extras:
> + meta-arago-demos:
> + meta-arago-test:
> +
> + meta-qt5:
> + url: "https://github.com/meta-qt5/meta-qt5.git"
> + branch: "scarthgap"
> + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801"
> +
> + meta-virtualization:
> + url: "https://git.yoctoproject.org/meta-virtualization"
> + branch: "scarthgap"
> + commit: "450941a1b6df96285691e8c23d4f332d3c88a994"
> +
> + meta-openembedded:
> + url: "https://git.openembedded.org/meta-openembedded"
> + branch: "scarthgap"
> + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654"
> + layers:
> + meta-networking:
> + meta-python:
> + meta-oe:
> + meta-gnome:
> + meta-filesystems:
> + meta-multimedia:
> +
> + meta-ti:
> + url: "https://git.yoctoproject.org/meta-ti"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-ti-extras:
> + meta-ti-bsp:
> +
> + meta-arm:
> + url: "https://git.yoctoproject.org/meta-arm"
> + branch: "scarthgap"
> + commit: "7088279c0ab00c7dabefdd4544951b4746b48476"
> + layers:
> + meta-arm:
> + meta-arm-toolchain:
> +
> + meta-clang:
> + url: "https://github.com/kraj/meta-clang"
> + branch: "scarthgap"
> + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5"
> +
> + oe-core:
> + url: "https://git.openembedded.org/openembedded-core"
> + branch: "scarthgap"
> + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765"
> + layers:
> + meta:
> +
> diff --git
> a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> new file mode 100644
> index 0000000..351d9ea
> --- /dev/null
> +++
> b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> @@ -0,0 +1,86 @@
> +header:
> + version: 17
> + includes:
> + - ../templates/bblayers.conf.yml
> + - ../templates/local-arago64-v2.conf.yml
> +
> +target: tisdk-default-image
> +
> +repos:
> + meta-tisdk:
> + url: "https://github.com/TexasInstruments/meta-tisdk.git"
> + branch: "scarthgap"
> + commit: "10.01.10.04"
> +
> + meta-arago:
> + url: "https://git.yoctoproject.org/meta-arago"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-arago-distro:
> + meta-arago-extras:
> + meta-arago-demos:
> + meta-arago-test:
> +
> + meta-browser:
> + url: "https://github.com/OSSystems/meta-browser.git"
> + branch: "master"
> + commit: "1ed2254d72a4c25879014c98be287a7e3e22904c"
> + layers:
> + meta-chromium:
> +
> + meta-qt5:
> + url: "https://github.com/meta-qt5/meta-qt5.git"
> + branch: "scarthgap"
> + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801"
> +
> + meta-virtualization:
> + url: "https://git.yoctoproject.org/meta-virtualization"
> + branch: "scarthgap"
> + commit: "450941a1b6df96285691e8c23d4f332d3c88a994"
> +
> + meta-openembedded:
> + url: "https://git.openembedded.org/meta-openembedded"
> + branch: "scarthgap"
> + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654"
> + layers:
> + meta-networking:
> + meta-python:
> + meta-oe:
> + meta-gnome:
> + meta-filesystems:
> + meta-multimedia:
> +
> + meta-ti:
> + url: "https://git.yoctoproject.org/meta-ti"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-ti-extras:
> + meta-ti-bsp:
> +
> + meta-arm:
> + url: "https://git.yoctoproject.org/meta-arm"
> + branch: "scarthgap"
> + commit: "7088279c0ab00c7dabefdd4544951b4746b48476"
> + layers:
> + meta-arm:
> + meta-arm-toolchain:
> +
> + meta-clang:
> + url: "https://github.com/kraj/meta-clang"
> + branch: "scarthgap"
> + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5"
> +
> + oe-core:
> + url: "https://git.openembedded.org/openembedded-core"
> + branch: "scarthgap"
> + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765"
> + layers:
> + meta:
> +
> + meta-edgeai:
> + url: "https://git.ti.com/git/edgeai/meta-edgeai.git"
> + branch: "scarthgap"
> + commit: "10.01.10.04"
> +
> diff --git
> a/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> new file mode 100644
> index 0000000..9ee86f2
> --- /dev/null
> +++
> b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> @@ -0,0 +1,66 @@
> +<?xml version='1.0'?>
> +<config>
> + <description>TI Processor SDK v10.01.10.04</description>
> +
> + <xi:include href='../../common/targets_arago.xml' xmlns:xi='
> http://www.w3.org/2001/XInclude'/>
> + <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi='
> http://www.w3.org/2001/XInclude'/>
> + <xi:include href='../../templates/local-arago64-v2.conf.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/>
> +
> + <bitbake url='https://git.openembedded.org/bitbake' branch='2.8'
> commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/>
> +
> + <repos>
> + <repo name='meta-tisdk' url='
> https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap'
> commit='10.01.10.04'>
> + <layers/>
> + </repo>
> + <repo name='meta-arago' url='
> https://git.yoctoproject.org/meta-arago' branch='scarthgap'
> commit='10.01.10'>
> + <layers>
> + <layer>meta-arago-distro</layer>
> + <layer>meta-arago-extras</layer>
> + <layer>meta-arago-demos</layer>
> + <layer>meta-arago-test</layer>
> + </layers>
> + </repo>
> + <repo name='meta-qt5' url='
> https://github.com/meta-qt5/meta-qt5.git' branch='scarthgap'
> commit='eb828418264a49b8d00035cb3d7b12fcea3be801'>
> + <layers/>
> + </repo>
> + <repo name='meta-virtualization' url='
> https://git.yoctoproject.org/meta-virtualization' branch='scarthgap'
> commit='450941a1b6df96285691e8c23d4f332d3c88a994'>
> + <layers/>
> + </repo>
> + <repo name='meta-openembedded' url='
> https://git.openembedded.org/meta-openembedded' branch='scarthgap'
> commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'>
> + <layers>
> + <layer>meta-networking</layer>
> + <layer>meta-python</layer>
> + <layer>meta-oe</layer>
> + <layer>meta-gnome</layer>
> + <layer>meta-filesystems</layer>
> + <layer>meta-multimedia</layer>
> + </layers>
> + </repo>
> + <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti'
> branch='scarthgap' commit='10.01.10'>
> + <layers>
> + <layer>meta-ti-extras</layer>
> + <layer>meta-ti-bsp</layer>
> + </layers>
> + </repo>
> + <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm'
> branch='scarthgap' commit='7088279c0ab00c7dabefdd4544951b4746b48476'>
> + <layers>
> + <layer>meta-arm</layer>
> + <layer>meta-arm-toolchain</layer>
> + </layers>
> + </repo>
> + <repo name='meta-clang' url='https://github.com/kraj/meta-clang'
> branch='scarthgap' commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'>
> + <layers/>
> + </repo>
> + <repo name='oe-core' url='
> https://git.openembedded.org/openembedded-core' branch='scarthgap'
> commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'>
> + <layers>
> + <layer>meta</layer>
> + </layers>
> + </repo>
> + </repos>
> +
> + <tools>
> + <tool type='oe-layersetup'>
> + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/>
> + </tool>
> + </tools>
> +</config>
> diff --git
> a/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
> b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
> new file mode 100644
> index 0000000..5a9df9e
> --- /dev/null
> +++
> b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
> @@ -0,0 +1,74 @@
> +<?xml version='1.0'?>
> +<config>
> + <description>TI Processor SDK vchromium-10.01.10.04</description>
> +
> + <xi:include href='../../common/targets_arago.xml' xmlns:xi='
> http://www.w3.org/2001/XInclude'/>
> + <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi='
> http://www.w3.org/2001/XInclude'/>
> + <xi:include href='../../templates/local-arago64-v2.conf.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/>
> +
> + <bitbake url='https://git.openembedded.org/bitbake' branch='2.8'
> commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/>
> +
> + <repos>
> + <repo name='meta-tisdk' url='
> https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap'
> commit='10.01.10.04'>
> + <layers/>
> + </repo>
> + <repo name='meta-arago' url='
> https://git.yoctoproject.org/meta-arago' branch='scarthgap'
> commit='10.01.10'>
> + <layers>
> + <layer>meta-arago-distro</layer>
> + <layer>meta-arago-extras</layer>
> + <layer>meta-arago-demos</layer>
> + <layer>meta-arago-test</layer>
> + </layers>
> + </repo>
> + <repo name='meta-browser' url='
> https://github.com/OSSystems/meta-browser.git' branch='master'
> commit='1ed2254d72a4c25879014c98be287a7e3e22904c'>
> + <layers>
> + <layer>meta-chromium</layer>
> + </layers>
> + </repo>
> + <repo name='meta-qt5' url='
> https://github.com/meta-qt5/meta-qt5.git' branch='scarthgap'
> commit='eb828418264a49b8d00035cb3d7b12fcea3be801'>
> + <layers/>
> + </repo>
> + <repo name='meta-virtualization' url='
> https://git.yoctoproject.org/meta-virtualization' branch='scarthgap'
> commit='450941a1b6df96285691e8c23d4f332d3c88a994'>
> + <layers/>
> + </repo>
> + <repo name='meta-openembedded' url='
> https://git.openembedded.org/meta-openembedded' branch='scarthgap'
> commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'>
> + <layers>
> + <layer>meta-networking</layer>
> + <layer>meta-python</layer>
> + <layer>meta-oe</layer>
> + <layer>meta-gnome</layer>
> + <layer>meta-filesystems</layer>
> + <layer>meta-multimedia</layer>
> + </layers>
> + </repo>
> + <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti'
> branch='scarthgap' commit='10.01.10'>
> + <layers>
> + <layer>meta-ti-extras</layer>
> + <layer>meta-ti-bsp</layer>
> + </layers>
> + </repo>
> + <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm'
> branch='scarthgap' commit='7088279c0ab00c7dabefdd4544951b4746b48476'>
> + <layers>
> + <layer>meta-arm</layer>
> + <layer>meta-arm-toolchain</layer>
> + </layers>
> + </repo>
> + <repo name='meta-clang' url='https://github.com/kraj/meta-clang'
> branch='scarthgap' commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'>
> + <layers/>
> + </repo>
> + <repo name='oe-core' url='
> https://git.openembedded.org/openembedded-core' branch='scarthgap'
> commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'>
> + <layers>
> + <layer>meta</layer>
> + </layers>
> + </repo>
> + <repo name='meta-edgeai' url='
> https://git.ti.com/git/edgeai/meta-edgeai.git' branch='scarthgap'
> commit='10.01.10.04'>
> + <layers/>
> + </repo>
> + </repos>
> +
> + <tools>
> + <tool type='oe-layersetup'>
> + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/>
> + </tool>
> + </tools>
> +</config>
> --
> 2.34.1
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#15673):
> https://lists.yoctoproject.org/g/meta-arago/message/15673
> Mute This Topic: https://lists.yoctoproject.org/mt/110200559/7902621
> Group Owner: meta-arago+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [
> jcormier@criticallink.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>
>
Having refreshed my memory from that time...
I auto converted OEBASE to TOPDIR because OEBASE is not a defined
variable. I'm not sure what the history of that variable was, but it is
not being set by any tool in the bitbake universe that I could find. So
before the conversion that was just getting expanded to "".
Where as TOPDIR is a defined variable in bitbake that points to the dir
where the build was launched from.
I didn't even think of it being a side effect, I was just fixing
something that seemed broken. Our build scripts are explicitly setting
DL_DIR and SSTATE_DIR because the scripts need to upload the files in
those dirs to our NAS for better reuse, so we were not impacted by this
change.
I can change it back if people want it, but OEBASE is not even really a
variable as far as I can tell.
Or I could change it to:
DL_DIR = "${TOPDIR}/../downloads"
SSTATE_DIR = "${TOPDIR}/sstate-cache"
Does that match the previous behavior?
Any preferences?
On 2/20/2025 10:58 AM, Jon Cormier wrote:
> After build processor-sdk-scarthgap-chromium-10.01.10.04-config, I
> noticed the downloads directory has moved to the build/downloads folder,
> instead of being at the top of the build directory. Was this
> intentional? I suspect it probably happened when everything was
> converted to xml configs. But the commit doesn't mention that as a known
> side effect.
>
> commit aea8e0f53cb05e2d80056b3568f3376741c90853
> Author: Ryan Eatmon <reatmon@ti.com <mailto:reatmon@ti.com>>
> Date: Thu Oct 10 11:43:57 2024 -0500
>
> Initial conversion of new XML configs
> ...
> -DL_DIR = "${OEBASE}/downloads"
> +DL_DIR = "${TOPDIR}/downloads"
> ...
> -SSTATE_DIR = "${OEBASE}/build/sstate-cache"
> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
>
> SSTATE_DIR was also updated and it still looks to be put in the same
> place as ever...
>
> On Thu, Dec 19, 2024 at 11:34 AM Chirag Shilwant via
> lists.yoctoproject.org <http://lists.yoctoproject.org>
> <c-shilwant=ti.com@lists.yoctoproject.org
> <mailto:ti.com@lists.yoctoproject.org>> wrote:
>
> - Add processor-sdk-scarthgap-10.01.10.04-config used for
> building AM62SIP & AM64x.
>
> - Add processor-sdk-scarthgap-chromium-10.01.10.04-config
> used for building AM62P, AM62x, AM62LP & Beagleplay.
>
> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com
> <mailto:c-shilwant@ti.com>>
> ---
> ...ssor-sdk-scarthgap-10.01.10.04-config.json | 136 ++++++++++++++
> ...scarthgap-chromium-10.01.10.04-config.json | 158 ++++++++++++++++
> .../bblayers.conf.sample | 32 ++++
> .../conf-notes.txt | 22 +++
> .../conf-summary.txt | 1 +
> .../local.conf.sample | 175 ++++++++++++++++++
> .../bblayers.conf.sample | 34 ++++
> .../conf-notes.txt | 22 +++
> .../conf-summary.txt | 1 +
> .../local.conf.sample | 175 ++++++++++++++++++
> ...essor-sdk-scarthgap-10.01.10.04-config.txt | 17 ++
> ...-scarthgap-chromium-10.01.10.04-config.txt | 19 ++
> ...essor-sdk-scarthgap-10.01.10.04-config.yml | 74 ++++++++
> ...-scarthgap-chromium-10.01.10.04-config.yml | 86 +++++++++
> ...essor-sdk-scarthgap-10.01.10.04-config.xml | 66 +++++++
> ...-scarthgap-chromium-10.01.10.04-config.xml | 74 ++++++++
> 16 files changed, 1092 insertions(+)
> create mode 100644
> bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> create mode 100644
> bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> create mode 100644
> conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> create mode 100644
> configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> create mode 100644
> configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> create mode 100644
> kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> create mode 100644
> kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> create mode 100644
> src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> create mode 100644
> src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
>
> diff --git
> a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> new file mode 100644
> index 0000000..f70e760
> --- /dev/null
> +++
> b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json
> @@ -0,0 +1,136 @@
> +{
> + "version": "1.0",
> + "description": "TI Processor SDK v10.01.10.04",
> + "sources": {
> + "oe-layersetup": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri":
> "https://git.ti.com/git/arago-project/oe-layersetup.git
> <https://git.ti.com/git/arago-project/oe-layersetup.git>"
> + }
> + },
> + "rev": "master"
> + },
> + "path": "oe-layersetup"
> + },
> + "bitbake": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/bitbake
> <https://git.openembedded.org/bitbake>"
> + }
> + },
> + "rev": "2.8"
> + },
> + "path": "bitbake"
> + },
> + "meta-tisdk": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri":
> "https://github.com/TexasInstruments/meta-tisdk.git
> <https://github.com/TexasInstruments/meta-tisdk.git>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-tisdk"
> + },
> + "meta-arago": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arago
> <https://git.yoctoproject.org/meta-arago>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arago"
> + },
> + "meta-qt5": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/meta-qt5/meta-qt5.git
> <https://github.com/meta-qt5/meta-qt5.git>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-qt5"
> + },
> + "meta-virtualization": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri":
> "https://git.yoctoproject.org/meta-virtualization
> <https://git.yoctoproject.org/meta-virtualization>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-virtualization"
> + },
> + "meta-openembedded": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/meta-openembedded
> <https://git.openembedded.org/meta-openembedded>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-openembedded"
> + },
> + "meta-ti": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-ti
> <https://git.yoctoproject.org/meta-ti>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-ti"
> + },
> + "meta-arm": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arm
> <https://git.yoctoproject.org/meta-arm>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arm"
> + },
> + "meta-clang": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/kraj/meta-clang
> <https://github.com/kraj/meta-clang>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-clang"
> + },
> + "oe-core": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/openembedded-core
> <https://git.openembedded.org/openembedded-core>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "oe-core"
> + }
> + },
> + "configuration": {
> + "bitbake-setup": {
> + "default": {
> + "description": "Default build configuration",
> + "template":
> "oe-layersetup-processor-sdk_processor-sdk-scarthgap-10.01.10.04-config",
> + "targets": [ "bitbake -k tisdk-default-image" ]
> + }
> + }
> + }
> +}
> diff --git
> a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> new file mode 100644
> index 0000000..fa0a0bd
> --- /dev/null
> +++
> b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json
> @@ -0,0 +1,158 @@
> +{
> + "version": "1.0",
> + "description": "TI Processor SDK vchromium-10.01.10.04",
> + "sources": {
> + "oe-layersetup": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri":
> "https://git.ti.com/git/arago-project/oe-layersetup.git
> <https://git.ti.com/git/arago-project/oe-layersetup.git>"
> + }
> + },
> + "rev": "master"
> + },
> + "path": "oe-layersetup"
> + },
> + "bitbake": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/bitbake
> <https://git.openembedded.org/bitbake>"
> + }
> + },
> + "rev": "2.8"
> + },
> + "path": "bitbake"
> + },
> + "meta-tisdk": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri":
> "https://github.com/TexasInstruments/meta-tisdk.git
> <https://github.com/TexasInstruments/meta-tisdk.git>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-tisdk"
> + },
> + "meta-arago": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arago
> <https://git.yoctoproject.org/meta-arago>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arago"
> + },
> + "meta-browser": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/OSSystems/meta-browser.git
> <https://github.com/OSSystems/meta-browser.git>"
> + }
> + },
> + "rev": "master"
> + },
> + "path": "meta-browser"
> + },
> + "meta-qt5": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/meta-qt5/meta-qt5.git
> <https://github.com/meta-qt5/meta-qt5.git>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-qt5"
> + },
> + "meta-virtualization": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri":
> "https://git.yoctoproject.org/meta-virtualization
> <https://git.yoctoproject.org/meta-virtualization>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-virtualization"
> + },
> + "meta-openembedded": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/meta-openembedded
> <https://git.openembedded.org/meta-openembedded>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-openembedded"
> + },
> + "meta-ti": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-ti
> <https://git.yoctoproject.org/meta-ti>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-ti"
> + },
> + "meta-arm": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.yoctoproject.org/meta-arm
> <https://git.yoctoproject.org/meta-arm>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-arm"
> + },
> + "meta-clang": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://github.com/kraj/meta-clang
> <https://github.com/kraj/meta-clang>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-clang"
> + },
> + "oe-core": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.openembedded.org/openembedded-core
> <https://git.openembedded.org/openembedded-core>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "oe-core"
> + },
> + "meta-edgeai": {
> + "git-remote": {
> + "remotes": {
> + "origin": {
> + "uri": "https://git.ti.com/git/edgeai/meta-edgeai.git
> <https://git.ti.com/git/edgeai/meta-edgeai.git>"
> + }
> + },
> + "rev": "scarthgap"
> + },
> + "path": "meta-edgeai"
> + }
> + },
> + "configuration": {
> + "bitbake-setup": {
> + "default": {
> + "description": "Default build configuration",
> + "template":
> "oe-layersetup-processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config",
> + "targets": [ "bitbake -k tisdk-default-image" ]
> + }
> + }
> + }
> +}
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> new file mode 100644
> index 0000000..10bcf2d
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample
> @@ -0,0 +1,32 @@
> +# This template file was created by taking the
> oe-core/meta/conf/bblayers.conf
> +# file and removing the BBLAYERS section at the end.
> +
> +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
> +# changes incompatibly
> +LCONF_VERSION = "5"
> +
> +BBPATH = "${TOPDIR}"
> +BBFILES ?= ""
> +
> +BBLAYERS ?= " \
> + ##OEROOT##/../meta-tisdk
> + ##OEROOT##/../meta-arago/meta-arago-distro
> + ##OEROOT##/../meta-arago/meta-arago-extras
> + ##OEROOT##/../meta-arago/meta-arago-demos
> + ##OEROOT##/../meta-arago/meta-arago-test
> + ##OEROOT##/../meta-qt5
> + ##OEROOT##/../meta-virtualization
> + ##OEROOT##/../meta-openembedded/meta-networking
> + ##OEROOT##/../meta-openembedded/meta-python
> + ##OEROOT##/../meta-openembedded/meta-oe
> + ##OEROOT##/../meta-openembedded/meta-gnome
> + ##OEROOT##/../meta-openembedded/meta-filesystems
> + ##OEROOT##/../meta-openembedded/meta-multimedia
> + ##OEROOT##/../meta-ti/meta-ti-extras
> + ##OEROOT##/../meta-ti/meta-ti-bsp
> + ##OEROOT##/../meta-arm/meta-arm
> + ##OEROOT##/../meta-arm/meta-arm-toolchain
> + ##OEROOT##/../meta-clang
> + ##OEROOT##/../oe-core/meta
> + ##OEROOT##/../oe-layersetup
> +"
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> new file mode 100644
> index 0000000..1880460
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt
> @@ -0,0 +1,22 @@
> +
> +### Shell environment set up for builds. ###
> +
> +You can now run 'bitbake <target>'
> +
> +If you have not set MACHINE in your local.conf you can run
> +'MACHINE=xxxxx bitbake <target>'
> +
> +Common targets are:
> + tisdk-default-image
> + tisdk-base-image
> + tisdk-bootstrap-base-image
> + tisdk-bootstrap-image
> + tisdk-thinlinux-image
> + tisdk-tiny-image
> +
> +You can also run generated qemu images with a command like 'runqemu
> qemux86-64'.
> +
> +Other commonly useful commands are:
> + - 'devtool' and 'recipetool' handle common recipe tasks
> + - 'bitbake-layers' handles common layer tasks
> + - 'oe-pkgdata-util' handles common target package tasks
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> new file mode 100644
> index 0000000..5e1739a
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt
> @@ -0,0 +1 @@
> +TI Processor SDK v10.01.10.04
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> new file mode 100644
> index 0000000..7575b4b
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> @@ -0,0 +1,175 @@
> +# CONF_VERSION is increased each time build/conf/ changes incompatibly
> +CONF_VERSION = "2"
> +
> +#
> +# Where to place downloads
> +#
> +# During a first build the system will download many different
> source code
> +# tarballs from various upstream projects. This can take a while,
> particularly
> +# if your network connection is slow. These are all stored in
> DL_DIR. When
> +# wiping and rebuilding you can preserve this directory to speed up
> this part
> +# of subsequent builds. This directory is safe to share between
> multiple builds
> +# on the same machine too.
> +DL_DIR = "${TOPDIR}/downloads"
> +
> +#
> +# Where to place shared-state files
> +#
> +# BitBake has the capability to accelerate builds based on
> previously built
> +# output. This is done using "shared state" files which can be
> thought of as
> +# cache objects and this option determines where those files are
> placed.
> +#
> +# You can wipe out TMPDIR leaving this directory intact and the
> build would
> +# regenerate from these files if no changes were made to the
> configuration.
> +# If changes were made to the configuration, only shared state
> files where the
> +# state was still valid would be used (done using checksums).
> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> +
> +#
> +# Shared-state files from other locations
> +#
> +# As mentioned above, shared state files are prebuilt cache data
> objects which
> +# can be used to accelerate build time. This variable can be used
> to configure
> +# the system to search other mirror locations for these objects
> before it
> +# builds the data itself.
> +#
> +# This can be a filesystem directory, or a remote url such as http
> or ftp.
> +# These would contain the sstate-cache results from previous builds
> (possibly
> +# from other machines). This variable works like fetcher
> MIRRORS/PREMIRRORS
> +# and points to the cache locations to check for the shared objects.
> +#SSTATE_MIRRORS ?= "\
> +#file://.* http://someserver.tld/share/sstate/
> <http://someserver.tld/share/sstate/> \n \
> +#file://.* file:///some/local/dir/sstate/"
> +
> +#
> +# Where to place the build output
> +#
> +# This option specifies where the bulk of the building work should
> be done and
> +# where BitBake should place its temporary files and output. Keep
> in mind that
> +# this includes the extraction and compilation of many applications
> and the toolchain
> +# which can use Gigabytes of hard disk space.
> +TMPDIR = "${TOPDIR}/arago-tmp"
> +
> +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here
> to be outside
> +#DEPLOY_DIR = "${TOPDIR}/deploy"
> +
> +#
> +# Machine Selection
> +#
> +# You need to select a specific machine to target the build with.
> There are a selection
> +# of emulated machines available which can boot and run in the QEMU
> emulator:
> +#
> +#MACHINE ?= "arago"
> +
> +#
> +# Package Management configuration
> +#
> +# This variable lists which packaging formats to enable. Multiple
> package backends
> +# can be enabled at once and the first item listed in the variable
> will be used
> +# to generate the root filesystems.
> +# Options are:
> +# - 'package_deb' for debian style deb files
> +# - 'package_ipk' for ipk files are used by opkg (a debian style
> embedded package manager)
> +# - 'package_rpm' for rpm style packages
> +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
> +# We default to ipk:
> +PACKAGE_CLASSES ?= "package_ipk"
> +
> +#
> +# SDK/ADT target architecture
> +#
> +# This variable specified the architecture to build SDK/ADT items
> for and means
> +# you can build the SDK packages for architectures other than the
> machine you are
> +# running the build on (i.e. building i686 packages on an x86_64 host._
> +# Supported values are i686 and x86_64
> +SDKMACHINE ?= "x86_64"
> +
> +#
> +# Extra image configuration defaults
> +#
> +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be
> added to the generated
> +# images. Some of these options are added to certain image types
> automatically. The
> +# variable can contain the following options:
> +# "dbg-pkgs" - add -dbg packages for all installed packages
> +# (adds symbol information for debugging/profiling)
> +# "dev-pkgs" - add -dev packages for all installed packages
> +# (useful if you want to develop against libs
> in the image)
> +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
> +# "tools-debug" - add debugging tools (gdb, strace)
> +# "tools-profile" - add profiling tools (oprofile, exmap, lttng
> valgrind (x86 only))
> +# "tools-testapps" - add useful testing tools (ts_print, aplay,
> arecord etc.)
> +# "debug-tweaks" - make an image suitable for development
> +# e.g. ssh root access has a blank password
> +# There are other application targets that can be used here too, see
> +# meta/classes/image.bbclass and meta/classes/core-image.bbclass
> for more details.
> +# We default to enabling the debugging tweaks.
> +EXTRA_IMAGE_FEATURES = "debug-tweaks"
> +
> +#
> +# Additional image features
> +#
> +# The following is a list of additional classes to use when
> building images which
> +# enable extra features. Some available options which can be
> included in this variable
> +# are:
> +# - 'buildstats' collect build statistics
> +# - 'image-swab' to perform host system intrusion detection
> +# NOTE: mklibs also needs to be explicitly enabled for a given
> image, see local.conf.extended
> +USER_CLASSES ?= "buildstats"
> +
> +# By default disable interactive patch resolution (tasks will just
> fail instead):
> +PATCHRESOLVE = "noop"
> +
> +# By default the machine configuration file sets the
> IMAGE_FSTYPES. But if you
> +# would like to add additional file system types you can uncomment the
> +# following line and add the additional IMAGE_FSTYPES you want created
> +# as part of the build flow. Some common types are listed below
> and you
> +# can remove the ones you do not want.
> +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi
> tar.gz tar.bz2 cpio"
> +
> +#
> +# Parallelism Options
> +#
> +# These two options control how much parallelism BitBake should
> use. The first
> +# option determines how many tasks bitbake should run in parallel:
> +#
> +# BB_NUMBER_THREADS ?= "1"
> +#
> +# The second option controls how many processes make should run in
> parallel when
> +# running compile tasks:
> +#
> +# PARALLEL_MAKE ?= "-j 1"
> +#
> +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE =
> "-j 4" would
> +# be appropriate for example
> +#
> +# NOTE: By default, bitbake will choose the number of processeors
> on your host
> +# so you should not need to set this unless you are wanting to
> lower the number
> +# allowed.
> +#
> +
> +DISTRO = "arago"
> +
> +# Set terminal types by default it expects gnome-terminal
> +# but we chose xterm
> +TERMCMD = "${XTERM_TERMCMD}"
> +TERMCMDRUN = "${XTERM_TERMCMDRUN}"
> +
> +# Don't generate the mirror tarball for SCM repos, the snapshot is
> enough
> +BB_GENERATE_MIRROR_TARBALLS = "0"
> +
> +# Uncomment this to remove work directory after packaging to save
> disk space
> +#INHERIT += "rm_work"
> +
> +# Keep one set of images by default
> +RM_OLD_IMAGE = "1"
> +
> +# Enable local PR service for binary feeds
> +PRSERV_HOST = "localhost:0"
> +
> +# Enable hash equiv server
> +BB_SIGNATURE_HANDLER = "OEEquivHash"
> +BB_HASHSERVE = "auto"
> +
> +# It is recommended to activate "buildhistory" for testing the PR
> service
> +INHERIT += "buildhistory"
> +BUILDHISTORY_COMMIT = "1"
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> new file mode 100644
> index 0000000..55a10df
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample
> @@ -0,0 +1,34 @@
> +# This template file was created by taking the
> oe-core/meta/conf/bblayers.conf
> +# file and removing the BBLAYERS section at the end.
> +
> +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
> +# changes incompatibly
> +LCONF_VERSION = "5"
> +
> +BBPATH = "${TOPDIR}"
> +BBFILES ?= ""
> +
> +BBLAYERS ?= " \
> + ##OEROOT##/../meta-tisdk
> + ##OEROOT##/../meta-arago/meta-arago-distro
> + ##OEROOT##/../meta-arago/meta-arago-extras
> + ##OEROOT##/../meta-arago/meta-arago-demos
> + ##OEROOT##/../meta-arago/meta-arago-test
> + ##OEROOT##/../meta-browser/meta-chromium
> + ##OEROOT##/../meta-qt5
> + ##OEROOT##/../meta-virtualization
> + ##OEROOT##/../meta-openembedded/meta-networking
> + ##OEROOT##/../meta-openembedded/meta-python
> + ##OEROOT##/../meta-openembedded/meta-oe
> + ##OEROOT##/../meta-openembedded/meta-gnome
> + ##OEROOT##/../meta-openembedded/meta-filesystems
> + ##OEROOT##/../meta-openembedded/meta-multimedia
> + ##OEROOT##/../meta-ti/meta-ti-extras
> + ##OEROOT##/../meta-ti/meta-ti-bsp
> + ##OEROOT##/../meta-arm/meta-arm
> + ##OEROOT##/../meta-arm/meta-arm-toolchain
> + ##OEROOT##/../meta-clang
> + ##OEROOT##/../oe-core/meta
> + ##OEROOT##/../meta-edgeai
> + ##OEROOT##/../oe-layersetup
> +"
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> new file mode 100644
> index 0000000..1880460
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt
> @@ -0,0 +1,22 @@
> +
> +### Shell environment set up for builds. ###
> +
> +You can now run 'bitbake <target>'
> +
> +If you have not set MACHINE in your local.conf you can run
> +'MACHINE=xxxxx bitbake <target>'
> +
> +Common targets are:
> + tisdk-default-image
> + tisdk-base-image
> + tisdk-bootstrap-base-image
> + tisdk-bootstrap-image
> + tisdk-thinlinux-image
> + tisdk-tiny-image
> +
> +You can also run generated qemu images with a command like 'runqemu
> qemux86-64'.
> +
> +Other commonly useful commands are:
> + - 'devtool' and 'recipetool' handle common recipe tasks
> + - 'bitbake-layers' handles common layer tasks
> + - 'oe-pkgdata-util' handles common target package tasks
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> new file mode 100644
> index 0000000..18049f6
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt
> @@ -0,0 +1 @@
> +TI Processor SDK vchromium-10.01.10.04
> diff --git
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> new file mode 100644
> index 0000000..7575b4b
> --- /dev/null
> +++
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> @@ -0,0 +1,175 @@
> +# CONF_VERSION is increased each time build/conf/ changes incompatibly
> +CONF_VERSION = "2"
> +
> +#
> +# Where to place downloads
> +#
> +# During a first build the system will download many different
> source code
> +# tarballs from various upstream projects. This can take a while,
> particularly
> +# if your network connection is slow. These are all stored in
> DL_DIR. When
> +# wiping and rebuilding you can preserve this directory to speed up
> this part
> +# of subsequent builds. This directory is safe to share between
> multiple builds
> +# on the same machine too.
> +DL_DIR = "${TOPDIR}/downloads"
> +
> +#
> +# Where to place shared-state files
> +#
> +# BitBake has the capability to accelerate builds based on
> previously built
> +# output. This is done using "shared state" files which can be
> thought of as
> +# cache objects and this option determines where those files are
> placed.
> +#
> +# You can wipe out TMPDIR leaving this directory intact and the
> build would
> +# regenerate from these files if no changes were made to the
> configuration.
> +# If changes were made to the configuration, only shared state
> files where the
> +# state was still valid would be used (done using checksums).
> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> +
> +#
> +# Shared-state files from other locations
> +#
> +# As mentioned above, shared state files are prebuilt cache data
> objects which
> +# can be used to accelerate build time. This variable can be used
> to configure
> +# the system to search other mirror locations for these objects
> before it
> +# builds the data itself.
> +#
> +# This can be a filesystem directory, or a remote url such as http
> or ftp.
> +# These would contain the sstate-cache results from previous builds
> (possibly
> +# from other machines). This variable works like fetcher
> MIRRORS/PREMIRRORS
> +# and points to the cache locations to check for the shared objects.
> +#SSTATE_MIRRORS ?= "\
> +#file://.* http://someserver.tld/share/sstate/
> <http://someserver.tld/share/sstate/> \n \
> +#file://.* file:///some/local/dir/sstate/"
> +
> +#
> +# Where to place the build output
> +#
> +# This option specifies where the bulk of the building work should
> be done and
> +# where BitBake should place its temporary files and output. Keep
> in mind that
> +# this includes the extraction and compilation of many applications
> and the toolchain
> +# which can use Gigabytes of hard disk space.
> +TMPDIR = "${TOPDIR}/arago-tmp"
> +
> +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here
> to be outside
> +#DEPLOY_DIR = "${TOPDIR}/deploy"
> +
> +#
> +# Machine Selection
> +#
> +# You need to select a specific machine to target the build with.
> There are a selection
> +# of emulated machines available which can boot and run in the QEMU
> emulator:
> +#
> +#MACHINE ?= "arago"
> +
> +#
> +# Package Management configuration
> +#
> +# This variable lists which packaging formats to enable. Multiple
> package backends
> +# can be enabled at once and the first item listed in the variable
> will be used
> +# to generate the root filesystems.
> +# Options are:
> +# - 'package_deb' for debian style deb files
> +# - 'package_ipk' for ipk files are used by opkg (a debian style
> embedded package manager)
> +# - 'package_rpm' for rpm style packages
> +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
> +# We default to ipk:
> +PACKAGE_CLASSES ?= "package_ipk"
> +
> +#
> +# SDK/ADT target architecture
> +#
> +# This variable specified the architecture to build SDK/ADT items
> for and means
> +# you can build the SDK packages for architectures other than the
> machine you are
> +# running the build on (i.e. building i686 packages on an x86_64 host._
> +# Supported values are i686 and x86_64
> +SDKMACHINE ?= "x86_64"
> +
> +#
> +# Extra image configuration defaults
> +#
> +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be
> added to the generated
> +# images. Some of these options are added to certain image types
> automatically. The
> +# variable can contain the following options:
> +# "dbg-pkgs" - add -dbg packages for all installed packages
> +# (adds symbol information for debugging/profiling)
> +# "dev-pkgs" - add -dev packages for all installed packages
> +# (useful if you want to develop against libs
> in the image)
> +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
> +# "tools-debug" - add debugging tools (gdb, strace)
> +# "tools-profile" - add profiling tools (oprofile, exmap, lttng
> valgrind (x86 only))
> +# "tools-testapps" - add useful testing tools (ts_print, aplay,
> arecord etc.)
> +# "debug-tweaks" - make an image suitable for development
> +# e.g. ssh root access has a blank password
> +# There are other application targets that can be used here too, see
> +# meta/classes/image.bbclass and meta/classes/core-image.bbclass
> for more details.
> +# We default to enabling the debugging tweaks.
> +EXTRA_IMAGE_FEATURES = "debug-tweaks"
> +
> +#
> +# Additional image features
> +#
> +# The following is a list of additional classes to use when
> building images which
> +# enable extra features. Some available options which can be
> included in this variable
> +# are:
> +# - 'buildstats' collect build statistics
> +# - 'image-swab' to perform host system intrusion detection
> +# NOTE: mklibs also needs to be explicitly enabled for a given
> image, see local.conf.extended
> +USER_CLASSES ?= "buildstats"
> +
> +# By default disable interactive patch resolution (tasks will just
> fail instead):
> +PATCHRESOLVE = "noop"
> +
> +# By default the machine configuration file sets the
> IMAGE_FSTYPES. But if you
> +# would like to add additional file system types you can uncomment the
> +# following line and add the additional IMAGE_FSTYPES you want created
> +# as part of the build flow. Some common types are listed below
> and you
> +# can remove the ones you do not want.
> +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi
> tar.gz tar.bz2 cpio"
> +
> +#
> +# Parallelism Options
> +#
> +# These two options control how much parallelism BitBake should
> use. The first
> +# option determines how many tasks bitbake should run in parallel:
> +#
> +# BB_NUMBER_THREADS ?= "1"
> +#
> +# The second option controls how many processes make should run in
> parallel when
> +# running compile tasks:
> +#
> +# PARALLEL_MAKE ?= "-j 1"
> +#
> +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE =
> "-j 4" would
> +# be appropriate for example
> +#
> +# NOTE: By default, bitbake will choose the number of processeors
> on your host
> +# so you should not need to set this unless you are wanting to
> lower the number
> +# allowed.
> +#
> +
> +DISTRO = "arago"
> +
> +# Set terminal types by default it expects gnome-terminal
> +# but we chose xterm
> +TERMCMD = "${XTERM_TERMCMD}"
> +TERMCMDRUN = "${XTERM_TERMCMDRUN}"
> +
> +# Don't generate the mirror tarball for SCM repos, the snapshot is
> enough
> +BB_GENERATE_MIRROR_TARBALLS = "0"
> +
> +# Uncomment this to remove work directory after packaging to save
> disk space
> +#INHERIT += "rm_work"
> +
> +# Keep one set of images by default
> +RM_OLD_IMAGE = "1"
> +
> +# Enable local PR service for binary feeds
> +PRSERV_HOST = "localhost:0"
> +
> +# Enable hash equiv server
> +BB_SIGNATURE_HANDLER = "OEEquivHash"
> +BB_HASHSERVE = "auto"
> +
> +# It is recommended to activate "buildhistory" for testing the PR
> service
> +INHERIT += "buildhistory"
> +BUILDHISTORY_COMMIT = "1"
> diff --git
> a/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> new file mode 100644
> index 0000000..b1281e5
> --- /dev/null
> +++
> b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt
> @@ -0,0 +1,17 @@
> +# This file takes repo entries in the format
> +# repo name,repo uri,repo branch,repo
> commit[,layers=layer1:layer2...:layern]
> +
> +bitbake,https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf
> +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=
> +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test
> +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=
> +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=
> +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia
> +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp
> +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain
> +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=
> +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta <https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test+meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain+meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta>
> +
> +OECORELAYERCONF=./sample-files/bblayers.conf.sample
> +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample
> +BITBAKE_INCLUSIVE_VARS=yes
> diff --git
> a/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> new file mode 100644
> index 0000000..5372ca8
> --- /dev/null
> +++
> b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt
> @@ -0,0 +1,19 @@
> +# This file takes repo entries in the format
> +# repo name,repo uri,repo branch,repo
> commit[,layers=layer1:layer2...:layern]
> +
> +bitbake,https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf
> +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=
> +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test
> +meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium
> +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=
> +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=
> +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia
> +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp
> +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain
> +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=
> +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta
> +meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers= <https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test+meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium+meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain+meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta+meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers=>
> +
> +OECORELAYERCONF=./sample-files/bblayers.conf.sample
> +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample
> +BITBAKE_INCLUSIVE_VARS=yes
> diff --git
> a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> new file mode 100644
> index 0000000..2dc2f5c
> --- /dev/null
> +++ b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> @@ -0,0 +1,74 @@
> +header:
> + version: 17
> + includes:
> + - ../templates/bblayers.conf.yml
> + - ../templates/local-arago64-v2.conf.yml
> +
> +target: tisdk-default-image
> +
> +repos:
> + meta-tisdk:
> + url: "https://github.com/TexasInstruments/meta-tisdk.git
> <https://github.com/TexasInstruments/meta-tisdk.git>"
> + branch: "scarthgap"
> + commit: "10.01.10.04"
> +
> + meta-arago:
> + url: "https://git.yoctoproject.org/meta-arago
> <https://git.yoctoproject.org/meta-arago>"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-arago-distro:
> + meta-arago-extras:
> + meta-arago-demos:
> + meta-arago-test:
> +
> + meta-qt5:
> + url: "https://github.com/meta-qt5/meta-qt5.git
> <https://github.com/meta-qt5/meta-qt5.git>"
> + branch: "scarthgap"
> + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801"
> +
> + meta-virtualization:
> + url: "https://git.yoctoproject.org/meta-virtualization
> <https://git.yoctoproject.org/meta-virtualization>"
> + branch: "scarthgap"
> + commit: "450941a1b6df96285691e8c23d4f332d3c88a994"
> +
> + meta-openembedded:
> + url: "https://git.openembedded.org/meta-openembedded
> <https://git.openembedded.org/meta-openembedded>"
> + branch: "scarthgap"
> + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654"
> + layers:
> + meta-networking:
> + meta-python:
> + meta-oe:
> + meta-gnome:
> + meta-filesystems:
> + meta-multimedia:
> +
> + meta-ti:
> + url: "https://git.yoctoproject.org/meta-ti
> <https://git.yoctoproject.org/meta-ti>"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-ti-extras:
> + meta-ti-bsp:
> +
> + meta-arm:
> + url: "https://git.yoctoproject.org/meta-arm
> <https://git.yoctoproject.org/meta-arm>"
> + branch: "scarthgap"
> + commit: "7088279c0ab00c7dabefdd4544951b4746b48476"
> + layers:
> + meta-arm:
> + meta-arm-toolchain:
> +
> + meta-clang:
> + url: "https://github.com/kraj/meta-clang
> <https://github.com/kraj/meta-clang>"
> + branch: "scarthgap"
> + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5"
> +
> + oe-core:
> + url: "https://git.openembedded.org/openembedded-core
> <https://git.openembedded.org/openembedded-core>"
> + branch: "scarthgap"
> + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765"
> + layers:
> + meta:
> +
> diff --git
> a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> new file mode 100644
> index 0000000..351d9ea
> --- /dev/null
> +++
> b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> @@ -0,0 +1,86 @@
> +header:
> + version: 17
> + includes:
> + - ../templates/bblayers.conf.yml
> + - ../templates/local-arago64-v2.conf.yml
> +
> +target: tisdk-default-image
> +
> +repos:
> + meta-tisdk:
> + url: "https://github.com/TexasInstruments/meta-tisdk.git
> <https://github.com/TexasInstruments/meta-tisdk.git>"
> + branch: "scarthgap"
> + commit: "10.01.10.04"
> +
> + meta-arago:
> + url: "https://git.yoctoproject.org/meta-arago
> <https://git.yoctoproject.org/meta-arago>"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-arago-distro:
> + meta-arago-extras:
> + meta-arago-demos:
> + meta-arago-test:
> +
> + meta-browser:
> + url: "https://github.com/OSSystems/meta-browser.git
> <https://github.com/OSSystems/meta-browser.git>"
> + branch: "master"
> + commit: "1ed2254d72a4c25879014c98be287a7e3e22904c"
> + layers:
> + meta-chromium:
> +
> + meta-qt5:
> + url: "https://github.com/meta-qt5/meta-qt5.git
> <https://github.com/meta-qt5/meta-qt5.git>"
> + branch: "scarthgap"
> + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801"
> +
> + meta-virtualization:
> + url: "https://git.yoctoproject.org/meta-virtualization
> <https://git.yoctoproject.org/meta-virtualization>"
> + branch: "scarthgap"
> + commit: "450941a1b6df96285691e8c23d4f332d3c88a994"
> +
> + meta-openembedded:
> + url: "https://git.openembedded.org/meta-openembedded
> <https://git.openembedded.org/meta-openembedded>"
> + branch: "scarthgap"
> + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654"
> + layers:
> + meta-networking:
> + meta-python:
> + meta-oe:
> + meta-gnome:
> + meta-filesystems:
> + meta-multimedia:
> +
> + meta-ti:
> + url: "https://git.yoctoproject.org/meta-ti
> <https://git.yoctoproject.org/meta-ti>"
> + branch: "scarthgap"
> + commit: "10.01.10"
> + layers:
> + meta-ti-extras:
> + meta-ti-bsp:
> +
> + meta-arm:
> + url: "https://git.yoctoproject.org/meta-arm
> <https://git.yoctoproject.org/meta-arm>"
> + branch: "scarthgap"
> + commit: "7088279c0ab00c7dabefdd4544951b4746b48476"
> + layers:
> + meta-arm:
> + meta-arm-toolchain:
> +
> + meta-clang:
> + url: "https://github.com/kraj/meta-clang
> <https://github.com/kraj/meta-clang>"
> + branch: "scarthgap"
> + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5"
> +
> + oe-core:
> + url: "https://git.openembedded.org/openembedded-core
> <https://git.openembedded.org/openembedded-core>"
> + branch: "scarthgap"
> + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765"
> + layers:
> + meta:
> +
> + meta-edgeai:
> + url: "https://git.ti.com/git/edgeai/meta-edgeai.git
> <https://git.ti.com/git/edgeai/meta-edgeai.git>"
> + branch: "scarthgap"
> + commit: "10.01.10.04"
> +
> diff --git
> a/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> new file mode 100644
> index 0000000..9ee86f2
> --- /dev/null
> +++
> b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml
> @@ -0,0 +1,66 @@
> +<?xml version='1.0'?>
> +<config>
> + <description>TI Processor SDK v10.01.10.04</description>
> +
> + <xi:include href='../../common/targets_arago.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/
> <http://www.w3.org/2001/XInclude'/>>
> + <xi:include href='../../templates/bblayers.conf.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/
> <http://www.w3.org/2001/XInclude'/>>
> + <xi:include href='../../templates/local-arago64-v2.conf.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/
> <http://www.w3.org/2001/XInclude'/>>
> +
> + <bitbake url='https://git.openembedded.org/bitbake
> <https://git.openembedded.org/bitbake>' branch='2.8'
> commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/>
> +
> + <repos>
> + <repo name='meta-tisdk'
> url='https://github.com/TexasInstruments/meta-tisdk.git
> <https://github.com/TexasInstruments/meta-tisdk.git>'
> branch='scarthgap' commit='10.01.10.04'>
> + <layers/>
> + </repo>
> + <repo name='meta-arago'
> url='https://git.yoctoproject.org/meta-arago
> <https://git.yoctoproject.org/meta-arago>' branch='scarthgap'
> commit='10.01.10'>
> + <layers>
> + <layer>meta-arago-distro</layer>
> + <layer>meta-arago-extras</layer>
> + <layer>meta-arago-demos</layer>
> + <layer>meta-arago-test</layer>
> + </layers>
> + </repo>
> + <repo name='meta-qt5'
> url='https://github.com/meta-qt5/meta-qt5.git
> <https://github.com/meta-qt5/meta-qt5.git>' branch='scarthgap'
> commit='eb828418264a49b8d00035cb3d7b12fcea3be801'>
> + <layers/>
> + </repo>
> + <repo name='meta-virtualization'
> url='https://git.yoctoproject.org/meta-virtualization
> <https://git.yoctoproject.org/meta-virtualization>'
> branch='scarthgap' commit='450941a1b6df96285691e8c23d4f332d3c88a994'>
> + <layers/>
> + </repo>
> + <repo name='meta-openembedded'
> url='https://git.openembedded.org/meta-openembedded
> <https://git.openembedded.org/meta-openembedded>' branch='scarthgap'
> commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'>
> + <layers>
> + <layer>meta-networking</layer>
> + <layer>meta-python</layer>
> + <layer>meta-oe</layer>
> + <layer>meta-gnome</layer>
> + <layer>meta-filesystems</layer>
> + <layer>meta-multimedia</layer>
> + </layers>
> + </repo>
> + <repo name='meta-ti'
> url='https://git.yoctoproject.org/meta-ti
> <https://git.yoctoproject.org/meta-ti>' branch='scarthgap'
> commit='10.01.10'>
> + <layers>
> + <layer>meta-ti-extras</layer>
> + <layer>meta-ti-bsp</layer>
> + </layers>
> + </repo>
> + <repo name='meta-arm'
> url='https://git.yoctoproject.org/meta-arm
> <https://git.yoctoproject.org/meta-arm>' branch='scarthgap'
> commit='7088279c0ab00c7dabefdd4544951b4746b48476'>
> + <layers>
> + <layer>meta-arm</layer>
> + <layer>meta-arm-toolchain</layer>
> + </layers>
> + </repo>
> + <repo name='meta-clang'
> url='https://github.com/kraj/meta-clang
> <https://github.com/kraj/meta-clang>' branch='scarthgap'
> commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'>
> + <layers/>
> + </repo>
> + <repo name='oe-core'
> url='https://git.openembedded.org/openembedded-core
> <https://git.openembedded.org/openembedded-core>' branch='scarthgap'
> commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'>
> + <layers>
> + <layer>meta</layer>
> + </layers>
> + </repo>
> + </repos>
> +
> + <tools>
> + <tool type='oe-layersetup'>
> + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/>
> + </tool>
> + </tools>
> +</config>
> diff --git
> a/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
> new file mode 100644
> index 0000000..5a9df9e
> --- /dev/null
> +++
> b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml
> @@ -0,0 +1,74 @@
> +<?xml version='1.0'?>
> +<config>
> + <description>TI Processor SDK vchromium-10.01.10.04</description>
> +
> + <xi:include href='../../common/targets_arago.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/
> <http://www.w3.org/2001/XInclude'/>>
> + <xi:include href='../../templates/bblayers.conf.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/
> <http://www.w3.org/2001/XInclude'/>>
> + <xi:include href='../../templates/local-arago64-v2.conf.xml'
> xmlns:xi='http://www.w3.org/2001/XInclude'/
> <http://www.w3.org/2001/XInclude'/>>
> +
> + <bitbake url='https://git.openembedded.org/bitbake
> <https://git.openembedded.org/bitbake>' branch='2.8'
> commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/>
> +
> + <repos>
> + <repo name='meta-tisdk'
> url='https://github.com/TexasInstruments/meta-tisdk.git
> <https://github.com/TexasInstruments/meta-tisdk.git>'
> branch='scarthgap' commit='10.01.10.04'>
> + <layers/>
> + </repo>
> + <repo name='meta-arago'
> url='https://git.yoctoproject.org/meta-arago
> <https://git.yoctoproject.org/meta-arago>' branch='scarthgap'
> commit='10.01.10'>
> + <layers>
> + <layer>meta-arago-distro</layer>
> + <layer>meta-arago-extras</layer>
> + <layer>meta-arago-demos</layer>
> + <layer>meta-arago-test</layer>
> + </layers>
> + </repo>
> + <repo name='meta-browser'
> url='https://github.com/OSSystems/meta-browser.git
> <https://github.com/OSSystems/meta-browser.git>' branch='master'
> commit='1ed2254d72a4c25879014c98be287a7e3e22904c'>
> + <layers>
> + <layer>meta-chromium</layer>
> + </layers>
> + </repo>
> + <repo name='meta-qt5'
> url='https://github.com/meta-qt5/meta-qt5.git
> <https://github.com/meta-qt5/meta-qt5.git>' branch='scarthgap'
> commit='eb828418264a49b8d00035cb3d7b12fcea3be801'>
> + <layers/>
> + </repo>
> + <repo name='meta-virtualization'
> url='https://git.yoctoproject.org/meta-virtualization
> <https://git.yoctoproject.org/meta-virtualization>'
> branch='scarthgap' commit='450941a1b6df96285691e8c23d4f332d3c88a994'>
> + <layers/>
> + </repo>
> + <repo name='meta-openembedded'
> url='https://git.openembedded.org/meta-openembedded
> <https://git.openembedded.org/meta-openembedded>' branch='scarthgap'
> commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'>
> + <layers>
> + <layer>meta-networking</layer>
> + <layer>meta-python</layer>
> + <layer>meta-oe</layer>
> + <layer>meta-gnome</layer>
> + <layer>meta-filesystems</layer>
> + <layer>meta-multimedia</layer>
> + </layers>
> + </repo>
> + <repo name='meta-ti'
> url='https://git.yoctoproject.org/meta-ti
> <https://git.yoctoproject.org/meta-ti>' branch='scarthgap'
> commit='10.01.10'>
> + <layers>
> + <layer>meta-ti-extras</layer>
> + <layer>meta-ti-bsp</layer>
> + </layers>
> + </repo>
> + <repo name='meta-arm'
> url='https://git.yoctoproject.org/meta-arm
> <https://git.yoctoproject.org/meta-arm>' branch='scarthgap'
> commit='7088279c0ab00c7dabefdd4544951b4746b48476'>
> + <layers>
> + <layer>meta-arm</layer>
> + <layer>meta-arm-toolchain</layer>
> + </layers>
> + </repo>
> + <repo name='meta-clang'
> url='https://github.com/kraj/meta-clang
> <https://github.com/kraj/meta-clang>' branch='scarthgap'
> commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'>
> + <layers/>
> + </repo>
> + <repo name='oe-core'
> url='https://git.openembedded.org/openembedded-core
> <https://git.openembedded.org/openembedded-core>' branch='scarthgap'
> commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'>
> + <layers>
> + <layer>meta</layer>
> + </layers>
> + </repo>
> + <repo name='meta-edgeai'
> url='https://git.ti.com/git/edgeai/meta-edgeai.git
> <https://git.ti.com/git/edgeai/meta-edgeai.git>' branch='scarthgap'
> commit='10.01.10.04'>
> + <layers/>
> + </repo>
> + </repos>
> +
> + <tools>
> + <tool type='oe-layersetup'>
> + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/>
> + </tool>
> + </tools>
> +</config>
> --
> 2.34.1
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#15673):
> https://lists.yoctoproject.org/g/meta-arago/message/15673
> <https://lists.yoctoproject.org/g/meta-arago/message/15673>
> Mute This Topic: https://lists.yoctoproject.org/mt/110200559/7902621
> <https://lists.yoctoproject.org/mt/110200559/7902621>
> Group Owner: meta-arago+owner@lists.yoctoproject.org
> <mailto:meta-arago%2Bowner@lists.yoctoproject.org>
> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
> <https://lists.yoctoproject.org/g/meta-arago/unsub>
> [jcormier@criticallink.com <mailto:jcormier@criticallink.com>]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>
>
>
> --
> Jonathan Cormier
> Senior Software Engineer
>
> Voice: 315.425.4045 x222
>
> http://www.CriticalLink.com <http://www.criticallink.com/>
> 6712 Brooklawn Parkway, Syracuse, NY 13211
> <https://twitter.com/Critical_Link>
--
Ryan Eatmon reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc. - LCPD - MGTS
On Thu, Feb 20, 2025 at 12:59 PM Ryan Eatmon <reatmon@ti.com> wrote: > > > Having refreshed my memory from that time... > > I auto converted OEBASE to TOPDIR because OEBASE is not a defined > variable. I'm not sure what the history of that variable was, but it is > not being set by any tool in the bitbake universe that I could find. So > before the conversion that was just getting expanded to "". So it looks like OEBASE is setup by the oe-layersetup script and gets inserted into the build/conf/setenv file: setenv: # Set OEBASE to where the build and source directories reside # NOTE: Do NOT place a trailing / on the end of OEBASE. export OEBASE="/work" ... This presumably wouldn't work for the other config systems (kas, bitbake-setup, etc) since they don't run oe-layersetup... > > Where as TOPDIR is a defined variable in bitbake that points to the dir > where the build was launched from. > > I didn't even think of it being a side effect, I was just fixing > something that seemed broken. Our build scripts are explicitly setting > DL_DIR and SSTATE_DIR because the scripts need to upload the files in > those dirs to our NAS for better reuse, so we were not impacted by this > change. Hmm thats a interesting, unrelated: I currently network share our SSTATE_DIR but don't do it for DL_DIR, I just rsync it at the end of the build. Do you host your own BB_HASHSERVE and PRSERV? > > I can change it back if people want it, but OEBASE is not even really a > variable as far as I can tell. > > Or I could change it to: > > DL_DIR = "${TOPDIR}/../downloads" > SSTATE_DIR = "${TOPDIR}/sstate-cache" > > Does that match the previous behavior? It does look like TOPDIR points to the build directory instead of one directory up like before. sstate-cache is currently being put in build/build/sstate-cache jcormier@jcormier-MS-7A93:/export/space/jcormier/yocto/yocto_scarthgap/oe-layersetup$ ls build/ arago-tmp-default-baremetal-k3r5 build conf arago-tmp-default-glibc buildhistory deploy-ti bitbake-cookerdaemon.log cache downloads jcormier@jcormier-MS-7A93:/export/space/jcormier/yocto/yocto_scarthgap/oe-layersetup$ ls build/build sstate-cache > > Any preferences? I assume keeping OEBASE isn't an option since it won't exist for these other setup systems. So I guess your second option. > > > On 2/20/2025 10:58 AM, Jon Cormier wrote: > > After build processor-sdk-scarthgap-chromium-10.01.10.04-config, I > > noticed the downloads directory has moved to the build/downloads folder, > > instead of being at the top of the build directory. Was this > > intentional? I suspect it probably happened when everything was > > converted to xml configs. But the commit doesn't mention that as a known > > side effect. > > > > commit aea8e0f53cb05e2d80056b3568f3376741c90853 > > Author: Ryan Eatmon <reatmon@ti.com <mailto:reatmon@ti.com>> > > Date: Thu Oct 10 11:43:57 2024 -0500 > > > > Initial conversion of new XML configs > > ... > > -DL_DIR = "${OEBASE}/downloads" > > +DL_DIR = "${TOPDIR}/downloads" > > ... > > -SSTATE_DIR = "${OEBASE}/build/sstate-cache" > > +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > > SSTATE_DIR was also updated and it still looks to be put in the same > > place as ever... > > > > On Thu, Dec 19, 2024 at 11:34 AM Chirag Shilwant via > > lists.yoctoproject.org <http://lists.yoctoproject.org> > > <c-shilwant=ti.com@lists.yoctoproject.org > > <mailto:ti.com@lists.yoctoproject.org>> wrote: > > > > - Add processor-sdk-scarthgap-10.01.10.04-config used for > > building AM62SIP & AM64x. > > > > - Add processor-sdk-scarthgap-chromium-10.01.10.04-config > > used for building AM62P, AM62x, AM62LP & Beagleplay. > > > > Signed-off-by: Chirag Shilwant <c-shilwant@ti.com > > <mailto:c-shilwant@ti.com>> > > --- > ... > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- > > Links: You receive all messages sent to this group. > > View/Reply Online (#15673): > > https://lists.yoctoproject.org/g/meta-arago/message/15673 > > <https://lists.yoctoproject.org/g/meta-arago/message/15673> > > Mute This Topic: https://lists.yoctoproject.org/mt/110200559/7902621 > > <https://lists.yoctoproject.org/mt/110200559/7902621> > > Group Owner: meta-arago+owner@lists.yoctoproject.org > > <mailto:meta-arago%2Bowner@lists.yoctoproject.org> > > Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub > > <https://lists.yoctoproject.org/g/meta-arago/unsub> > > [jcormier@criticallink.com <mailto:jcormier@criticallink.com>] > > -=-=-=-=-=-=-=-=-=-=-=- > > > > > > > > > > -- > > Jonathan Cormier > > Senior Software Engineer > > > > Voice: 315.425.4045 x222 > > > > http://www.CriticalLink.com <http://www.criticallink.com/> > > 6712 Brooklawn Parkway, Syracuse, NY 13211 > > <https://twitter.com/Critical_Link> > > -- > Ryan Eatmon reatmon@ti.com > ----------------------------------------- > Texas Instruments, Inc. - LCPD - MGTS
On 2/20/2025 1:19 PM, Jon Cormier wrote: > On Thu, Feb 20, 2025 at 12:59 PM Ryan Eatmon <reatmon@ti.com> wrote: >> >> >> Having refreshed my memory from that time... >> >> I auto converted OEBASE to TOPDIR because OEBASE is not a defined >> variable. I'm not sure what the history of that variable was, but it is >> not being set by any tool in the bitbake universe that I could find. So >> before the conversion that was just getting expanded to "". > So it looks like OEBASE is setup by the oe-layersetup script and gets > inserted into the build/conf/setenv file: Doh. All of my searches for OEBASE did not include the setup script itself... That's on me. But I do think that moving to values relative to TOPDIR instead of OEBASE will be better in the long run. > setenv: > # Set OEBASE to where the build and source directories reside > # NOTE: Do NOT place a trailing / on the end of OEBASE. > export OEBASE="/work" > ... > > This presumably wouldn't work for the other config systems (kas, > bitbake-setup, etc) since they don't run oe-layersetup... > >> >> Where as TOPDIR is a defined variable in bitbake that points to the dir >> where the build was launched from. >> >> I didn't even think of it being a side effect, I was just fixing >> something that seemed broken. Our build scripts are explicitly setting >> DL_DIR and SSTATE_DIR because the scripts need to upload the files in >> those dirs to our NAS for better reuse, so we were not impacted by this >> change. > Hmm thats a interesting, unrelated: I currently network share our > SSTATE_DIR but don't do it for DL_DIR, I just rsync it at the end of > the build. Do you host your own BB_HASHSERVE and PRSERV? We rsync both the downloads and sstate to a NAS that all of our build servers can access. Yes, we run our own BB_HASHSERVE and PRSERV so that all of the build jobs are aligned on what the values for the PR should be. >> >> I can change it back if people want it, but OEBASE is not even really a >> variable as far as I can tell. >> >> Or I could change it to: >> >> DL_DIR = "${TOPDIR}/../downloads" >> SSTATE_DIR = "${TOPDIR}/sstate-cache" >> >> Does that match the previous behavior? > It does look like TOPDIR points to the build directory instead of one > directory up like before. sstate-cache is currently being put in > build/build/sstate-cache > > jcormier@jcormier-MS-7A93:/export/space/jcormier/yocto/yocto_scarthgap/oe-layersetup$ > ls build/ > arago-tmp-default-baremetal-k3r5 build conf > arago-tmp-default-glibc buildhistory deploy-ti > bitbake-cookerdaemon.log cache downloads > jcormier@jcormier-MS-7A93:/export/space/jcormier/yocto/yocto_scarthgap/oe-layersetup$ > ls build/build > sstate-cache >> >> Any preferences? > I assume keeping OEBASE isn't an option since it won't exist for these > other setup systems. So I guess your second option. Ok. I'll post a patch and make this change. >> >> On 2/20/2025 10:58 AM, Jon Cormier wrote: >>> After build processor-sdk-scarthgap-chromium-10.01.10.04-config, I >>> noticed the downloads directory has moved to the build/downloads folder, >>> instead of being at the top of the build directory. Was this >>> intentional? I suspect it probably happened when everything was >>> converted to xml configs. But the commit doesn't mention that as a known >>> side effect. >>> >>> commit aea8e0f53cb05e2d80056b3568f3376741c90853 >>> Author: Ryan Eatmon <reatmon@ti.com <mailto:reatmon@ti.com>> >>> Date: Thu Oct 10 11:43:57 2024 -0500 >>> >>> Initial conversion of new XML configs >>> ... >>> -DL_DIR = "${OEBASE}/downloads" >>> +DL_DIR = "${TOPDIR}/downloads" >>> ... >>> -SSTATE_DIR = "${OEBASE}/build/sstate-cache" >>> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" >>> >>> SSTATE_DIR was also updated and it still looks to be put in the same >>> place as ever... >>> >>> On Thu, Dec 19, 2024 at 11:34 AM Chirag Shilwant via >>> lists.yoctoproject.org <http://lists.yoctoproject.org> >>> <c-shilwant=ti.com@lists.yoctoproject.org >>> <mailto:ti.com@lists.yoctoproject.org>> wrote: >>> >>> - Add processor-sdk-scarthgap-10.01.10.04-config used for >>> building AM62SIP & AM64x. >>> >>> - Add processor-sdk-scarthgap-chromium-10.01.10.04-config >>> used for building AM62P, AM62x, AM62LP & Beagleplay. >>> >>> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com >>> <mailto:c-shilwant@ti.com>> >>> --- >> ... >>> >>> >>> >>> -=-=-=-=-=-=-=-=-=-=-=- >>> Links: You receive all messages sent to this group. >>> View/Reply Online (#15673): >>> https://lists.yoctoproject.org/g/meta-arago/message/15673 >>> <https://lists.yoctoproject.org/g/meta-arago/message/15673> >>> Mute This Topic: https://lists.yoctoproject.org/mt/110200559/7902621 >>> <https://lists.yoctoproject.org/mt/110200559/7902621> >>> Group Owner: meta-arago+owner@lists.yoctoproject.org >>> <mailto:meta-arago%2Bowner@lists.yoctoproject.org> >>> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub >>> <https://lists.yoctoproject.org/g/meta-arago/unsub> >>> [jcormier@criticallink.com <mailto:jcormier@criticallink.com>] >>> -=-=-=-=-=-=-=-=-=-=-=- >>> >>> >>> >>> >>> -- >>> Jonathan Cormier >>> Senior Software Engineer >>> >>> Voice: 315.425.4045 x222 >>> >>> http://www.CriticalLink.com <http://www.criticallink.com/> >>> 6712 Brooklawn Parkway, Syracuse, NY 13211 >>> <https://twitter.com/Critical_Link> >> >> -- >> Ryan Eatmon reatmon@ti.com >> ----------------------------------------- >> Texas Instruments, Inc. - LCPD - MGTS > > >
Jon, If you want to test the change, you can use the wip branch to run a build and make sure that everything is back to the way it was. On 2/20/2025 5:09 PM, Ryan Eatmon via lists.yoctoproject.org wrote: > > > On 2/20/2025 1:19 PM, Jon Cormier wrote: >> On Thu, Feb 20, 2025 at 12:59 PM Ryan Eatmon <reatmon@ti.com> wrote: >>> >>> >>> Having refreshed my memory from that time... >>> >>> I auto converted OEBASE to TOPDIR because OEBASE is not a defined >>> variable. I'm not sure what the history of that variable was, but it is >>> not being set by any tool in the bitbake universe that I could find. So >>> before the conversion that was just getting expanded to "". >> So it looks like OEBASE is setup by the oe-layersetup script and gets >> inserted into the build/conf/setenv file: > > Doh. All of my searches for OEBASE did not include the setup script > itself... That's on me. But I do think that moving to values relative > to TOPDIR instead of OEBASE will be better in the long run. > > >> setenv: >> # Set OEBASE to where the build and source directories reside >> # NOTE: Do NOT place a trailing / on the end of OEBASE. >> export OEBASE="/work" >> ... >> >> This presumably wouldn't work for the other config systems (kas, >> bitbake-setup, etc) since they don't run oe-layersetup... >> >>> >>> Where as TOPDIR is a defined variable in bitbake that points to the dir >>> where the build was launched from. >>> >>> I didn't even think of it being a side effect, I was just fixing >>> something that seemed broken. Our build scripts are explicitly setting >>> DL_DIR and SSTATE_DIR because the scripts need to upload the files in >>> those dirs to our NAS for better reuse, so we were not impacted by this >>> change. >> Hmm thats a interesting, unrelated: I currently network share our >> SSTATE_DIR but don't do it for DL_DIR, I just rsync it at the end of >> the build. Do you host your own BB_HASHSERVE and PRSERV? > > We rsync both the downloads and sstate to a NAS that all of our build > servers can access. Yes, we run our own BB_HASHSERVE and PRSERV so that > all of the build jobs are aligned on what the values for the PR should be. > >>> >>> I can change it back if people want it, but OEBASE is not even really a >>> variable as far as I can tell. >>> >>> Or I could change it to: >>> >>> DL_DIR = "${TOPDIR}/../downloads" >>> SSTATE_DIR = "${TOPDIR}/sstate-cache" >>> >>> Does that match the previous behavior? >> It does look like TOPDIR points to the build directory instead of one >> directory up like before. sstate-cache is currently being put in >> build/build/sstate-cache >> >> jcormier@jcormier-MS-7A93:/export/space/jcormier/yocto/yocto_scarthgap/oe-layersetup$ >> ls build/ >> arago-tmp-default-baremetal-k3r5 build conf >> arago-tmp-default-glibc buildhistory deploy-ti >> bitbake-cookerdaemon.log cache downloads >> jcormier@jcormier-MS-7A93:/export/space/jcormier/yocto/yocto_scarthgap/oe-layersetup$ >> ls build/build >> sstate-cache >>> >>> Any preferences? >> I assume keeping OEBASE isn't an option since it won't exist for these >> other setup systems. So I guess your second option. > > Ok. I'll post a patch and make this change. > > >>> >>> On 2/20/2025 10:58 AM, Jon Cormier wrote: >>>> After build processor-sdk-scarthgap-chromium-10.01.10.04-config, I >>>> noticed the downloads directory has moved to the build/downloads >>>> folder, >>>> instead of being at the top of the build directory. Was this >>>> intentional? I suspect it probably happened when everything was >>>> converted to xml configs. But the commit doesn't mention that as a >>>> known >>>> side effect. >>>> >>>> commit aea8e0f53cb05e2d80056b3568f3376741c90853 >>>> Author: Ryan Eatmon <reatmon@ti.com <mailto:reatmon@ti.com>> >>>> Date: Thu Oct 10 11:43:57 2024 -0500 >>>> >>>> Initial conversion of new XML configs >>>> ... >>>> -DL_DIR = "${OEBASE}/downloads" >>>> +DL_DIR = "${TOPDIR}/downloads" >>>> ... >>>> -SSTATE_DIR = "${OEBASE}/build/sstate-cache" >>>> +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" >>>> >>>> SSTATE_DIR was also updated and it still looks to be put in the same >>>> place as ever... >>>> >>>> On Thu, Dec 19, 2024 at 11:34 AM Chirag Shilwant via >>>> lists.yoctoproject.org <http://lists.yoctoproject.org> >>>> <c-shilwant=ti.com@lists.yoctoproject.org >>>> <mailto:ti.com@lists.yoctoproject.org>> wrote: >>>> >>>> - Add processor-sdk-scarthgap-10.01.10.04-config used for >>>> building AM62SIP & AM64x. >>>> >>>> - Add processor-sdk-scarthgap-chromium-10.01.10.04-config >>>> used for building AM62P, AM62x, AM62LP & Beagleplay. >>>> >>>> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com >>>> <mailto:c-shilwant@ti.com>> >>>> --- >>> ... >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> Jonathan Cormier >>>> Senior Software Engineer >>>> >>>> Voice: 315.425.4045 x222 >>>> >>>> http://www.CriticalLink.com <http://www.criticallink.com/> >>>> 6712 Brooklawn Parkway, Syracuse, NY 13211 >>>> <https://twitter.com/Critical_Link> >>> >>> -- >>> Ryan Eatmon reatmon@ti.com >>> ----------------------------------------- >>> Texas Instruments, Inc. - LCPD - MGTS >> >> >> >
diff --git a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json new file mode 100644 index 0000000..f70e760 --- /dev/null +++ b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json @@ -0,0 +1,136 @@ +{ + "version": "1.0", + "description": "TI Processor SDK v10.01.10.04", + "sources": { + "oe-layersetup": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.ti.com/git/arago-project/oe-layersetup.git" + } + }, + "rev": "master" + }, + "path": "oe-layersetup" + }, + "bitbake": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.openembedded.org/bitbake" + } + }, + "rev": "2.8" + }, + "path": "bitbake" + }, + "meta-tisdk": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/TexasInstruments/meta-tisdk.git" + } + }, + "rev": "scarthgap" + }, + "path": "meta-tisdk" + }, + "meta-arago": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-arago" + } + }, + "rev": "scarthgap" + }, + "path": "meta-arago" + }, + "meta-qt5": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/meta-qt5/meta-qt5.git" + } + }, + "rev": "scarthgap" + }, + "path": "meta-qt5" + }, + "meta-virtualization": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-virtualization" + } + }, + "rev": "scarthgap" + }, + "path": "meta-virtualization" + }, + "meta-openembedded": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.openembedded.org/meta-openembedded" + } + }, + "rev": "scarthgap" + }, + "path": "meta-openembedded" + }, + "meta-ti": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-ti" + } + }, + "rev": "scarthgap" + }, + "path": "meta-ti" + }, + "meta-arm": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-arm" + } + }, + "rev": "scarthgap" + }, + "path": "meta-arm" + }, + "meta-clang": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/kraj/meta-clang" + } + }, + "rev": "scarthgap" + }, + "path": "meta-clang" + }, + "oe-core": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.openembedded.org/openembedded-core" + } + }, + "rev": "scarthgap" + }, + "path": "oe-core" + } + }, + "configuration": { + "bitbake-setup": { + "default": { + "description": "Default build configuration", + "template": "oe-layersetup-processor-sdk_processor-sdk-scarthgap-10.01.10.04-config", + "targets": [ "bitbake -k tisdk-default-image" ] + } + } + } +} diff --git a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json new file mode 100644 index 0000000..fa0a0bd --- /dev/null +++ b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json @@ -0,0 +1,158 @@ +{ + "version": "1.0", + "description": "TI Processor SDK vchromium-10.01.10.04", + "sources": { + "oe-layersetup": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.ti.com/git/arago-project/oe-layersetup.git" + } + }, + "rev": "master" + }, + "path": "oe-layersetup" + }, + "bitbake": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.openembedded.org/bitbake" + } + }, + "rev": "2.8" + }, + "path": "bitbake" + }, + "meta-tisdk": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/TexasInstruments/meta-tisdk.git" + } + }, + "rev": "scarthgap" + }, + "path": "meta-tisdk" + }, + "meta-arago": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-arago" + } + }, + "rev": "scarthgap" + }, + "path": "meta-arago" + }, + "meta-browser": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/OSSystems/meta-browser.git" + } + }, + "rev": "master" + }, + "path": "meta-browser" + }, + "meta-qt5": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/meta-qt5/meta-qt5.git" + } + }, + "rev": "scarthgap" + }, + "path": "meta-qt5" + }, + "meta-virtualization": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-virtualization" + } + }, + "rev": "scarthgap" + }, + "path": "meta-virtualization" + }, + "meta-openembedded": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.openembedded.org/meta-openembedded" + } + }, + "rev": "scarthgap" + }, + "path": "meta-openembedded" + }, + "meta-ti": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-ti" + } + }, + "rev": "scarthgap" + }, + "path": "meta-ti" + }, + "meta-arm": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.yoctoproject.org/meta-arm" + } + }, + "rev": "scarthgap" + }, + "path": "meta-arm" + }, + "meta-clang": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://github.com/kraj/meta-clang" + } + }, + "rev": "scarthgap" + }, + "path": "meta-clang" + }, + "oe-core": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.openembedded.org/openembedded-core" + } + }, + "rev": "scarthgap" + }, + "path": "oe-core" + }, + "meta-edgeai": { + "git-remote": { + "remotes": { + "origin": { + "uri": "https://git.ti.com/git/edgeai/meta-edgeai.git" + } + }, + "rev": "scarthgap" + }, + "path": "meta-edgeai" + } + }, + "configuration": { + "bitbake-setup": { + "default": { + "description": "Default build configuration", + "template": "oe-layersetup-processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config", + "targets": [ "bitbake -k tisdk-default-image" ] + } + } + } +} diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample new file mode 100644 index 0000000..10bcf2d --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample @@ -0,0 +1,32 @@ +# This template file was created by taking the oe-core/meta/conf/bblayers.conf +# file and removing the BBLAYERS section at the end. + +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "5" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/../meta-tisdk + ##OEROOT##/../meta-arago/meta-arago-distro + ##OEROOT##/../meta-arago/meta-arago-extras + ##OEROOT##/../meta-arago/meta-arago-demos + ##OEROOT##/../meta-arago/meta-arago-test + ##OEROOT##/../meta-qt5 + ##OEROOT##/../meta-virtualization + ##OEROOT##/../meta-openembedded/meta-networking + ##OEROOT##/../meta-openembedded/meta-python + ##OEROOT##/../meta-openembedded/meta-oe + ##OEROOT##/../meta-openembedded/meta-gnome + ##OEROOT##/../meta-openembedded/meta-filesystems + ##OEROOT##/../meta-openembedded/meta-multimedia + ##OEROOT##/../meta-ti/meta-ti-extras + ##OEROOT##/../meta-ti/meta-ti-bsp + ##OEROOT##/../meta-arm/meta-arm + ##OEROOT##/../meta-arm/meta-arm-toolchain + ##OEROOT##/../meta-clang + ##OEROOT##/../oe-core/meta + ##OEROOT##/../oe-layersetup +" diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt new file mode 100644 index 0000000..1880460 --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt @@ -0,0 +1,22 @@ + +### Shell environment set up for builds. ### + +You can now run 'bitbake <target>' + +If you have not set MACHINE in your local.conf you can run +'MACHINE=xxxxx bitbake <target>' + +Common targets are: + tisdk-default-image + tisdk-base-image + tisdk-bootstrap-base-image + tisdk-bootstrap-image + tisdk-thinlinux-image + tisdk-tiny-image + +You can also run generated qemu images with a command like 'runqemu qemux86-64'. + +Other commonly useful commands are: + - 'devtool' and 'recipetool' handle common recipe tasks + - 'bitbake-layers' handles common layer tasks + - 'oe-pkgdata-util' handles common target package tasks diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt new file mode 100644 index 0000000..5e1739a --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt @@ -0,0 +1 @@ +TI Processor SDK v10.01.10.04 diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample new file mode 100644 index 0000000..7575b4b --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample @@ -0,0 +1,175 @@ +# CONF_VERSION is increased each time build/conf/ changes incompatibly +CONF_VERSION = "2" + +# +# Where to place downloads +# +# During a first build the system will download many different source code +# tarballs from various upstream projects. This can take a while, particularly +# if your network connection is slow. These are all stored in DL_DIR. When +# wiping and rebuilding you can preserve this directory to speed up this part +# of subsequent builds. This directory is safe to share between multiple builds +# on the same machine too. +DL_DIR = "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built +# output. This is done using "shared state" files which can be thought of as +# cache objects and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would +# regenerate from these files if no changes were made to the configuration. +# If changes were made to the configuration, only shared state files where the +# state was still valid would be used (done using checksums). +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which +# can be used to accelerate build time. This variable can be used to configure +# the system to search other mirror locations for these objects before it +# builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. +# These would contain the sstate-cache results from previous builds (possibly +# from other machines). This variable works like fetcher MIRRORS/PREMIRRORS +# and points to the cache locations to check for the shared objects. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/ \n \ +#file://.* file:///some/local/dir/sstate/" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +TMPDIR = "${TOPDIR}/arago-tmp" + +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be outside +#DEPLOY_DIR = "${TOPDIR}/deploy" + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "arago" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to ipk: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK/ADT target architecture +# +# This variable specified the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host._ +# Supported values are i686 and x86_64 +SDKMACHINE ?= "x86_64" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only)) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-swab' to perform host system intrusion detection +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats" + +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# By default the machine configuration file sets the IMAGE_FSTYPES. But if you +# would like to add additional file system types you can uncomment the +# following line and add the additional IMAGE_FSTYPES you want created +# as part of the build flow. Some common types are listed below and you +# can remove the ones you do not want. +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz tar.bz2 cpio" + +# +# Parallelism Options +# +# These two options control how much parallelism BitBake should use. The first +# option determines how many tasks bitbake should run in parallel: +# +# BB_NUMBER_THREADS ?= "1" +# +# The second option controls how many processes make should run in parallel when +# running compile tasks: +# +# PARALLEL_MAKE ?= "-j 1" +# +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would +# be appropriate for example +# +# NOTE: By default, bitbake will choose the number of processeors on your host +# so you should not need to set this unless you are wanting to lower the number +# allowed. +# + +DISTRO = "arago" + +# Set terminal types by default it expects gnome-terminal +# but we chose xterm +TERMCMD = "${XTERM_TERMCMD}" +TERMCMDRUN = "${XTERM_TERMCMDRUN}" + +# Don't generate the mirror tarball for SCM repos, the snapshot is enough +BB_GENERATE_MIRROR_TARBALLS = "0" + +# Uncomment this to remove work directory after packaging to save disk space +#INHERIT += "rm_work" + +# Keep one set of images by default +RM_OLD_IMAGE = "1" + +# Enable local PR service for binary feeds +PRSERV_HOST = "localhost:0" + +# Enable hash equiv server +BB_SIGNATURE_HANDLER = "OEEquivHash" +BB_HASHSERVE = "auto" + +# It is recommended to activate "buildhistory" for testing the PR service +INHERIT += "buildhistory" +BUILDHISTORY_COMMIT = "1" diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample new file mode 100644 index 0000000..55a10df --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample @@ -0,0 +1,34 @@ +# This template file was created by taking the oe-core/meta/conf/bblayers.conf +# file and removing the BBLAYERS section at the end. + +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "5" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/../meta-tisdk + ##OEROOT##/../meta-arago/meta-arago-distro + ##OEROOT##/../meta-arago/meta-arago-extras + ##OEROOT##/../meta-arago/meta-arago-demos + ##OEROOT##/../meta-arago/meta-arago-test + ##OEROOT##/../meta-browser/meta-chromium + ##OEROOT##/../meta-qt5 + ##OEROOT##/../meta-virtualization + ##OEROOT##/../meta-openembedded/meta-networking + ##OEROOT##/../meta-openembedded/meta-python + ##OEROOT##/../meta-openembedded/meta-oe + ##OEROOT##/../meta-openembedded/meta-gnome + ##OEROOT##/../meta-openembedded/meta-filesystems + ##OEROOT##/../meta-openembedded/meta-multimedia + ##OEROOT##/../meta-ti/meta-ti-extras + ##OEROOT##/../meta-ti/meta-ti-bsp + ##OEROOT##/../meta-arm/meta-arm + ##OEROOT##/../meta-arm/meta-arm-toolchain + ##OEROOT##/../meta-clang + ##OEROOT##/../oe-core/meta + ##OEROOT##/../meta-edgeai + ##OEROOT##/../oe-layersetup +" diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt new file mode 100644 index 0000000..1880460 --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt @@ -0,0 +1,22 @@ + +### Shell environment set up for builds. ### + +You can now run 'bitbake <target>' + +If you have not set MACHINE in your local.conf you can run +'MACHINE=xxxxx bitbake <target>' + +Common targets are: + tisdk-default-image + tisdk-base-image + tisdk-bootstrap-base-image + tisdk-bootstrap-image + tisdk-thinlinux-image + tisdk-tiny-image + +You can also run generated qemu images with a command like 'runqemu qemux86-64'. + +Other commonly useful commands are: + - 'devtool' and 'recipetool' handle common recipe tasks + - 'bitbake-layers' handles common layer tasks + - 'oe-pkgdata-util' handles common target package tasks diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt new file mode 100644 index 0000000..18049f6 --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt @@ -0,0 +1 @@ +TI Processor SDK vchromium-10.01.10.04 diff --git a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample new file mode 100644 index 0000000..7575b4b --- /dev/null +++ b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample @@ -0,0 +1,175 @@ +# CONF_VERSION is increased each time build/conf/ changes incompatibly +CONF_VERSION = "2" + +# +# Where to place downloads +# +# During a first build the system will download many different source code +# tarballs from various upstream projects. This can take a while, particularly +# if your network connection is slow. These are all stored in DL_DIR. When +# wiping and rebuilding you can preserve this directory to speed up this part +# of subsequent builds. This directory is safe to share between multiple builds +# on the same machine too. +DL_DIR = "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built +# output. This is done using "shared state" files which can be thought of as +# cache objects and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would +# regenerate from these files if no changes were made to the configuration. +# If changes were made to the configuration, only shared state files where the +# state was still valid would be used (done using checksums). +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which +# can be used to accelerate build time. This variable can be used to configure +# the system to search other mirror locations for these objects before it +# builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. +# These would contain the sstate-cache results from previous builds (possibly +# from other machines). This variable works like fetcher MIRRORS/PREMIRRORS +# and points to the cache locations to check for the shared objects. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/ \n \ +#file://.* file:///some/local/dir/sstate/" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +TMPDIR = "${TOPDIR}/arago-tmp" + +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be outside +#DEPLOY_DIR = "${TOPDIR}/deploy" + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "arago" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to ipk: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK/ADT target architecture +# +# This variable specified the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host._ +# Supported values are i686 and x86_64 +SDKMACHINE ?= "x86_64" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only)) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-swab' to perform host system intrusion detection +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats" + +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# By default the machine configuration file sets the IMAGE_FSTYPES. But if you +# would like to add additional file system types you can uncomment the +# following line and add the additional IMAGE_FSTYPES you want created +# as part of the build flow. Some common types are listed below and you +# can remove the ones you do not want. +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz tar.bz2 cpio" + +# +# Parallelism Options +# +# These two options control how much parallelism BitBake should use. The first +# option determines how many tasks bitbake should run in parallel: +# +# BB_NUMBER_THREADS ?= "1" +# +# The second option controls how many processes make should run in parallel when +# running compile tasks: +# +# PARALLEL_MAKE ?= "-j 1" +# +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would +# be appropriate for example +# +# NOTE: By default, bitbake will choose the number of processeors on your host +# so you should not need to set this unless you are wanting to lower the number +# allowed. +# + +DISTRO = "arago" + +# Set terminal types by default it expects gnome-terminal +# but we chose xterm +TERMCMD = "${XTERM_TERMCMD}" +TERMCMDRUN = "${XTERM_TERMCMDRUN}" + +# Don't generate the mirror tarball for SCM repos, the snapshot is enough +BB_GENERATE_MIRROR_TARBALLS = "0" + +# Uncomment this to remove work directory after packaging to save disk space +#INHERIT += "rm_work" + +# Keep one set of images by default +RM_OLD_IMAGE = "1" + +# Enable local PR service for binary feeds +PRSERV_HOST = "localhost:0" + +# Enable hash equiv server +BB_SIGNATURE_HANDLER = "OEEquivHash" +BB_HASHSERVE = "auto" + +# It is recommended to activate "buildhistory" for testing the PR service +INHERIT += "buildhistory" +BUILDHISTORY_COMMIT = "1" diff --git a/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt new file mode 100644 index 0000000..b1281e5 --- /dev/null +++ b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt @@ -0,0 +1,17 @@ +# This file takes repo entries in the format +# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern] + +bitbake,https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers= +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers= +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers= +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers= +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta + +OECORELAYERCONF=./sample-files/bblayers.conf.sample +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample +BITBAKE_INCLUSIVE_VARS=yes diff --git a/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt new file mode 100644 index 0000000..5372ca8 --- /dev/null +++ b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt @@ -0,0 +1,19 @@ +# This file takes repo entries in the format +# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern] + +bitbake,https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers= +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test +meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers= +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers= +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers= +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta +meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers= + +OECORELAYERCONF=./sample-files/bblayers.conf.sample +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample +BITBAKE_INCLUSIVE_VARS=yes diff --git a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml new file mode 100644 index 0000000..2dc2f5c --- /dev/null +++ b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml @@ -0,0 +1,74 @@ +header: + version: 17 + includes: + - ../templates/bblayers.conf.yml + - ../templates/local-arago64-v2.conf.yml + +target: tisdk-default-image + +repos: + meta-tisdk: + url: "https://github.com/TexasInstruments/meta-tisdk.git" + branch: "scarthgap" + commit: "10.01.10.04" + + meta-arago: + url: "https://git.yoctoproject.org/meta-arago" + branch: "scarthgap" + commit: "10.01.10" + layers: + meta-arago-distro: + meta-arago-extras: + meta-arago-demos: + meta-arago-test: + + meta-qt5: + url: "https://github.com/meta-qt5/meta-qt5.git" + branch: "scarthgap" + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801" + + meta-virtualization: + url: "https://git.yoctoproject.org/meta-virtualization" + branch: "scarthgap" + commit: "450941a1b6df96285691e8c23d4f332d3c88a994" + + meta-openembedded: + url: "https://git.openembedded.org/meta-openembedded" + branch: "scarthgap" + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654" + layers: + meta-networking: + meta-python: + meta-oe: + meta-gnome: + meta-filesystems: + meta-multimedia: + + meta-ti: + url: "https://git.yoctoproject.org/meta-ti" + branch: "scarthgap" + commit: "10.01.10" + layers: + meta-ti-extras: + meta-ti-bsp: + + meta-arm: + url: "https://git.yoctoproject.org/meta-arm" + branch: "scarthgap" + commit: "7088279c0ab00c7dabefdd4544951b4746b48476" + layers: + meta-arm: + meta-arm-toolchain: + + meta-clang: + url: "https://github.com/kraj/meta-clang" + branch: "scarthgap" + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5" + + oe-core: + url: "https://git.openembedded.org/openembedded-core" + branch: "scarthgap" + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765" + layers: + meta: + diff --git a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml new file mode 100644 index 0000000..351d9ea --- /dev/null +++ b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml @@ -0,0 +1,86 @@ +header: + version: 17 + includes: + - ../templates/bblayers.conf.yml + - ../templates/local-arago64-v2.conf.yml + +target: tisdk-default-image + +repos: + meta-tisdk: + url: "https://github.com/TexasInstruments/meta-tisdk.git" + branch: "scarthgap" + commit: "10.01.10.04" + + meta-arago: + url: "https://git.yoctoproject.org/meta-arago" + branch: "scarthgap" + commit: "10.01.10" + layers: + meta-arago-distro: + meta-arago-extras: + meta-arago-demos: + meta-arago-test: + + meta-browser: + url: "https://github.com/OSSystems/meta-browser.git" + branch: "master" + commit: "1ed2254d72a4c25879014c98be287a7e3e22904c" + layers: + meta-chromium: + + meta-qt5: + url: "https://github.com/meta-qt5/meta-qt5.git" + branch: "scarthgap" + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801" + + meta-virtualization: + url: "https://git.yoctoproject.org/meta-virtualization" + branch: "scarthgap" + commit: "450941a1b6df96285691e8c23d4f332d3c88a994" + + meta-openembedded: + url: "https://git.openembedded.org/meta-openembedded" + branch: "scarthgap" + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654" + layers: + meta-networking: + meta-python: + meta-oe: + meta-gnome: + meta-filesystems: + meta-multimedia: + + meta-ti: + url: "https://git.yoctoproject.org/meta-ti" + branch: "scarthgap" + commit: "10.01.10" + layers: + meta-ti-extras: + meta-ti-bsp: + + meta-arm: + url: "https://git.yoctoproject.org/meta-arm" + branch: "scarthgap" + commit: "7088279c0ab00c7dabefdd4544951b4746b48476" + layers: + meta-arm: + meta-arm-toolchain: + + meta-clang: + url: "https://github.com/kraj/meta-clang" + branch: "scarthgap" + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5" + + oe-core: + url: "https://git.openembedded.org/openembedded-core" + branch: "scarthgap" + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765" + layers: + meta: + + meta-edgeai: + url: "https://git.ti.com/git/edgeai/meta-edgeai.git" + branch: "scarthgap" + commit: "10.01.10.04" + diff --git a/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml new file mode 100644 index 0000000..9ee86f2 --- /dev/null +++ b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml @@ -0,0 +1,66 @@ +<?xml version='1.0'?> +<config> + <description>TI Processor SDK v10.01.10.04</description> + + <xi:include href='../../common/targets_arago.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/> + <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/> + <xi:include href='../../templates/local-arago64-v2.conf.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/> + + <bitbake url='https://git.openembedded.org/bitbake' branch='2.8' commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/> + + <repos> + <repo name='meta-tisdk' url='https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap' commit='10.01.10.04'> + <layers/> + </repo> + <repo name='meta-arago' url='https://git.yoctoproject.org/meta-arago' branch='scarthgap' commit='10.01.10'> + <layers> + <layer>meta-arago-distro</layer> + <layer>meta-arago-extras</layer> + <layer>meta-arago-demos</layer> + <layer>meta-arago-test</layer> + </layers> + </repo> + <repo name='meta-qt5' url='https://github.com/meta-qt5/meta-qt5.git' branch='scarthgap' commit='eb828418264a49b8d00035cb3d7b12fcea3be801'> + <layers/> + </repo> + <repo name='meta-virtualization' url='https://git.yoctoproject.org/meta-virtualization' branch='scarthgap' commit='450941a1b6df96285691e8c23d4f332d3c88a994'> + <layers/> + </repo> + <repo name='meta-openembedded' url='https://git.openembedded.org/meta-openembedded' branch='scarthgap' commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'> + <layers> + <layer>meta-networking</layer> + <layer>meta-python</layer> + <layer>meta-oe</layer> + <layer>meta-gnome</layer> + <layer>meta-filesystems</layer> + <layer>meta-multimedia</layer> + </layers> + </repo> + <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti' branch='scarthgap' commit='10.01.10'> + <layers> + <layer>meta-ti-extras</layer> + <layer>meta-ti-bsp</layer> + </layers> + </repo> + <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm' branch='scarthgap' commit='7088279c0ab00c7dabefdd4544951b4746b48476'> + <layers> + <layer>meta-arm</layer> + <layer>meta-arm-toolchain</layer> + </layers> + </repo> + <repo name='meta-clang' url='https://github.com/kraj/meta-clang' branch='scarthgap' commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'> + <layers/> + </repo> + <repo name='oe-core' url='https://git.openembedded.org/openembedded-core' branch='scarthgap' commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'> + <layers> + <layer>meta</layer> + </layers> + </repo> + </repos> + + <tools> + <tool type='oe-layersetup'> + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/> + </tool> + </tools> +</config> diff --git a/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml new file mode 100644 index 0000000..5a9df9e --- /dev/null +++ b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml @@ -0,0 +1,74 @@ +<?xml version='1.0'?> +<config> + <description>TI Processor SDK vchromium-10.01.10.04</description> + + <xi:include href='../../common/targets_arago.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/> + <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/> + <xi:include href='../../templates/local-arago64-v2.conf.xml' xmlns:xi='http://www.w3.org/2001/XInclude'/> + + <bitbake url='https://git.openembedded.org/bitbake' branch='2.8' commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/> + + <repos> + <repo name='meta-tisdk' url='https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap' commit='10.01.10.04'> + <layers/> + </repo> + <repo name='meta-arago' url='https://git.yoctoproject.org/meta-arago' branch='scarthgap' commit='10.01.10'> + <layers> + <layer>meta-arago-distro</layer> + <layer>meta-arago-extras</layer> + <layer>meta-arago-demos</layer> + <layer>meta-arago-test</layer> + </layers> + </repo> + <repo name='meta-browser' url='https://github.com/OSSystems/meta-browser.git' branch='master' commit='1ed2254d72a4c25879014c98be287a7e3e22904c'> + <layers> + <layer>meta-chromium</layer> + </layers> + </repo> + <repo name='meta-qt5' url='https://github.com/meta-qt5/meta-qt5.git' branch='scarthgap' commit='eb828418264a49b8d00035cb3d7b12fcea3be801'> + <layers/> + </repo> + <repo name='meta-virtualization' url='https://git.yoctoproject.org/meta-virtualization' branch='scarthgap' commit='450941a1b6df96285691e8c23d4f332d3c88a994'> + <layers/> + </repo> + <repo name='meta-openembedded' url='https://git.openembedded.org/meta-openembedded' branch='scarthgap' commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'> + <layers> + <layer>meta-networking</layer> + <layer>meta-python</layer> + <layer>meta-oe</layer> + <layer>meta-gnome</layer> + <layer>meta-filesystems</layer> + <layer>meta-multimedia</layer> + </layers> + </repo> + <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti' branch='scarthgap' commit='10.01.10'> + <layers> + <layer>meta-ti-extras</layer> + <layer>meta-ti-bsp</layer> + </layers> + </repo> + <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm' branch='scarthgap' commit='7088279c0ab00c7dabefdd4544951b4746b48476'> + <layers> + <layer>meta-arm</layer> + <layer>meta-arm-toolchain</layer> + </layers> + </repo> + <repo name='meta-clang' url='https://github.com/kraj/meta-clang' branch='scarthgap' commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'> + <layers/> + </repo> + <repo name='oe-core' url='https://git.openembedded.org/openembedded-core' branch='scarthgap' commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'> + <layers> + <layer>meta</layer> + </layers> + </repo> + <repo name='meta-edgeai' url='https://git.ti.com/git/edgeai/meta-edgeai.git' branch='scarthgap' commit='10.01.10.04'> + <layers/> + </repo> + </repos> + + <tools> + <tool type='oe-layersetup'> + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/> + </tool> + </tools> +</config>
- Add processor-sdk-scarthgap-10.01.10.04-config used for building AM62SIP & AM64x. - Add processor-sdk-scarthgap-chromium-10.01.10.04-config used for building AM62P, AM62x, AM62LP & Beagleplay. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> --- ...ssor-sdk-scarthgap-10.01.10.04-config.json | 136 ++++++++++++++ ...scarthgap-chromium-10.01.10.04-config.json | 158 ++++++++++++++++ .../bblayers.conf.sample | 32 ++++ .../conf-notes.txt | 22 +++ .../conf-summary.txt | 1 + .../local.conf.sample | 175 ++++++++++++++++++ .../bblayers.conf.sample | 34 ++++ .../conf-notes.txt | 22 +++ .../conf-summary.txt | 1 + .../local.conf.sample | 175 ++++++++++++++++++ ...essor-sdk-scarthgap-10.01.10.04-config.txt | 17 ++ ...-scarthgap-chromium-10.01.10.04-config.txt | 19 ++ ...essor-sdk-scarthgap-10.01.10.04-config.yml | 74 ++++++++ ...-scarthgap-chromium-10.01.10.04-config.yml | 86 +++++++++ ...essor-sdk-scarthgap-10.01.10.04-config.xml | 66 +++++++ ...-scarthgap-chromium-10.01.10.04-config.xml | 74 ++++++++ 16 files changed, 1092 insertions(+) create mode 100644 bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json create mode 100644 bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt create mode 100644 conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample create mode 100644 configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt create mode 100644 configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt create mode 100644 kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml create mode 100644 kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml create mode 100644 src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml create mode 100644 src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml