| Message ID | 20220801214007.25463-1-afd@ti.com |
|---|---|
| State | Accepted |
| Delegated to: | Ryan Eatmon |
| Headers | show |
| Series | [meta-ti,dunfell,1/4] conf: machine: Make multi-certificate image the default | expand |
Is this a third or forth revision of the patch? What are the changes? If no changes and it is exactly the same as previous, should the existing Reviewed-by: lines be preserved? On Mon, Aug 01, 2022 at 04:40:04PM -0500, Andrew Davis via lists.yoctoproject.org wrote: > Only the first two K3 devices do not support multi-cert boot so > lets make multi-cert the default and only add back sysfw.itb > for these two devices. > > Signed-off-by: Andrew Davis <afd@ti.com> > --- > conf/machine/include/am62xx.inc | 3 --- > conf/machine/include/am64xx.inc | 3 --- > conf/machine/include/am65xx.inc | 5 ++++- > conf/machine/include/j7.inc | 2 -- > conf/machine/include/k3.inc | 5 +---- > conf/machine/j7-evm.conf | 3 +++ > conf/machine/j7-hs-evm.conf | 1 - > conf/machine/j7200-evm.conf | 3 --- > conf/machine/j721s2-evm.conf | 3 --- > 9 files changed, 8 insertions(+), 20 deletions(-) > > diff --git a/conf/machine/include/am62xx.inc b/conf/machine/include/am62xx.inc > index 0364edd1..0231235f 100644 > --- a/conf/machine/include/am62xx.inc > +++ b/conf/machine/include/am62xx.inc > @@ -8,9 +8,6 @@ SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > TFA_K3_SYSTEM_SUSPEND = "1" > > -# AM62 supports multi-certificate images, use the same > -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" > - > do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > > diff --git a/conf/machine/include/am64xx.inc b/conf/machine/include/am64xx.inc > index 8e8e146f..930fba08 100644 > --- a/conf/machine/include/am64xx.inc > +++ b/conf/machine/include/am64xx.inc > @@ -14,9 +14,6 @@ KERNEL_DEVICETREE = " \ > ti/k3-am642-evm-nand.dtbo \ > " > > -# AM64 supports multi-certificate images, use the same > -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" > - > do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > > diff --git a/conf/machine/include/am65xx.inc b/conf/machine/include/am65xx.inc > index 1898f19c..b70d212f 100644 > --- a/conf/machine/include/am65xx.inc > +++ b/conf/machine/include/am65xx.inc > @@ -22,9 +22,12 @@ KERNEL_DEVICETREE = " \ > > BBMULTICONFIG += "k3r5-sr2" > > -# Use default IMAGE_BOOT_FILES_LEGACY files > +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb > +IMAGE_BOOT_FILES += "sysfw.itb" > + > # Since default sysfw.itb on AM65x is for SR2.0, add a version for SR1.0 > IMAGE_BOOT_FILES += "sysfw-am65x-evm.itb" > + > do_image_wic[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" > do_image_tar[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" > > diff --git a/conf/machine/include/j7.inc b/conf/machine/include/j7.inc > index d3eda1a8..c187f299 100644 > --- a/conf/machine/include/j7.inc > +++ b/conf/machine/include/j7.inc > @@ -4,8 +4,6 @@ SOC_FAMILY_append = ":j7" > OPTEEMACHINE = "k3-j721e" > OPTEEOUTPUTMACHINE = "k3" > > -# Use default IMAGE_BOOT_FILES_LEGACY files > - > # Set the list of device targets for ti-pdk class recipes > TI_PDK_LIMIT_SOCS = "j721e j7200" > TI_PDK_LIMIT_BOARDS = "j721e_evm j7200_evm" > diff --git a/conf/machine/include/k3.inc b/conf/machine/include/k3.inc > index f85e6b98..24741dee 100644 > --- a/conf/machine/include/k3.inc > +++ b/conf/machine/include/k3.inc > @@ -41,10 +41,7 @@ MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 alsa ethernet pci" > > IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap" > > -IMAGE_BOOT_FILES_LEGACY = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin sysfw.itb" > -IMAGE_BOOT_FILES_MULTI_CERT = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" > - > -IMAGE_BOOT_FILES ?= "${IMAGE_BOOT_FILES_LEGACY}" > +IMAGE_BOOT_FILES ?= "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" > > WKS_FILE ?= "sdimage-2part.wks" > do_image_wic[depends] += "virtual/bootloader:do_deploy" > diff --git a/conf/machine/j7-evm.conf b/conf/machine/j7-evm.conf > index 1f47f00c..514695d6 100644 > --- a/conf/machine/j7-evm.conf > +++ b/conf/machine/j7-evm.conf > @@ -9,6 +9,9 @@ MACHINE_FEATURES += "gpu" > SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" > SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb > +IMAGE_BOOT_FILES += "sysfw.itb" > + > KERNEL_DEVICETREE = " \ > ti/k3-j721e-common-proc-board.dtb \ > ti/k3-j721e-proc-board-tps65917.dtb \ > diff --git a/conf/machine/j7-hs-evm.conf b/conf/machine/j7-hs-evm.conf > index ece0d85e..5cb2a3cd 100644 > --- a/conf/machine/j7-hs-evm.conf > +++ b/conf/machine/j7-hs-evm.conf > @@ -20,7 +20,6 @@ UBOOT_SYMLINK = "u-boot.img" > > BBMULTICONFIG += "k3r5-sr1-1" > > -# Use default IMAGE_BOOT_FILES_LEGACY files > # Since default sysfw.itb on J7 is for SR1.1, add a version for SR1.0 > IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" > do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" > diff --git a/conf/machine/j7200-evm.conf b/conf/machine/j7200-evm.conf > index 2565c90c..c8a03a7b 100644 > --- a/conf/machine/j7200-evm.conf > +++ b/conf/machine/j7200-evm.conf > @@ -13,8 +13,5 @@ KERNEL_DEVICETREE = " \ > > UBOOT_MACHINE = "j7200_evm_a72_config" > > -# J7200 supports multi-certificate images, use the same > -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" > - > do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > diff --git a/conf/machine/j721s2-evm.conf b/conf/machine/j721s2-evm.conf > index 8cf3a414..ba5e8def 100644 > --- a/conf/machine/j721s2-evm.conf > +++ b/conf/machine/j721s2-evm.conf > @@ -18,8 +18,5 @@ KERNEL_DEVICETREE = " \ > > UBOOT_MACHINE = "j721s2_evm_a72_defconfig" > > -# J721S2 supports multi-certificate images, use the same > -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" > - > do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" > -- > 2.36.1
On 8/2/22 2:47 PM, Denys Dmytriyenko wrote: > Is this a third or forth revision of the patch? What are the changes? If no > changes and it is exactly the same as previous, should the existing > Reviewed-by: lines be preserved? > The last posting was an RFC. I see it did get included in a previous series before that, which I do see your reviewed-by. Yes, it should have been preserved. Andrew > > On Mon, Aug 01, 2022 at 04:40:04PM -0500, Andrew Davis via lists.yoctoproject.org wrote: >> Only the first two K3 devices do not support multi-cert boot so >> lets make multi-cert the default and only add back sysfw.itb >> for these two devices. >> >> Signed-off-by: Andrew Davis <afd@ti.com> >> --- >> conf/machine/include/am62xx.inc | 3 --- >> conf/machine/include/am64xx.inc | 3 --- >> conf/machine/include/am65xx.inc | 5 ++++- >> conf/machine/include/j7.inc | 2 -- >> conf/machine/include/k3.inc | 5 +---- >> conf/machine/j7-evm.conf | 3 +++ >> conf/machine/j7-hs-evm.conf | 1 - >> conf/machine/j7200-evm.conf | 3 --- >> conf/machine/j721s2-evm.conf | 3 --- >> 9 files changed, 8 insertions(+), 20 deletions(-) >> >> diff --git a/conf/machine/include/am62xx.inc b/conf/machine/include/am62xx.inc >> index 0364edd1..0231235f 100644 >> --- a/conf/machine/include/am62xx.inc >> +++ b/conf/machine/include/am62xx.inc >> @@ -8,9 +8,6 @@ SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> >> TFA_K3_SYSTEM_SUSPEND = "1" >> >> -# AM62 supports multi-certificate images, use the same >> -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" >> - >> do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> >> diff --git a/conf/machine/include/am64xx.inc b/conf/machine/include/am64xx.inc >> index 8e8e146f..930fba08 100644 >> --- a/conf/machine/include/am64xx.inc >> +++ b/conf/machine/include/am64xx.inc >> @@ -14,9 +14,6 @@ KERNEL_DEVICETREE = " \ >> ti/k3-am642-evm-nand.dtbo \ >> " >> >> -# AM64 supports multi-certificate images, use the same >> -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" >> - >> do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> >> diff --git a/conf/machine/include/am65xx.inc b/conf/machine/include/am65xx.inc >> index 1898f19c..b70d212f 100644 >> --- a/conf/machine/include/am65xx.inc >> +++ b/conf/machine/include/am65xx.inc >> @@ -22,9 +22,12 @@ KERNEL_DEVICETREE = " \ >> >> BBMULTICONFIG += "k3r5-sr2" >> >> -# Use default IMAGE_BOOT_FILES_LEGACY files >> +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb >> +IMAGE_BOOT_FILES += "sysfw.itb" >> + >> # Since default sysfw.itb on AM65x is for SR2.0, add a version for SR1.0 >> IMAGE_BOOT_FILES += "sysfw-am65x-evm.itb" >> + >> do_image_wic[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" >> do_image_tar[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" >> >> diff --git a/conf/machine/include/j7.inc b/conf/machine/include/j7.inc >> index d3eda1a8..c187f299 100644 >> --- a/conf/machine/include/j7.inc >> +++ b/conf/machine/include/j7.inc >> @@ -4,8 +4,6 @@ SOC_FAMILY_append = ":j7" >> OPTEEMACHINE = "k3-j721e" >> OPTEEOUTPUTMACHINE = "k3" >> >> -# Use default IMAGE_BOOT_FILES_LEGACY files >> - >> # Set the list of device targets for ti-pdk class recipes >> TI_PDK_LIMIT_SOCS = "j721e j7200" >> TI_PDK_LIMIT_BOARDS = "j721e_evm j7200_evm" >> diff --git a/conf/machine/include/k3.inc b/conf/machine/include/k3.inc >> index f85e6b98..24741dee 100644 >> --- a/conf/machine/include/k3.inc >> +++ b/conf/machine/include/k3.inc >> @@ -41,10 +41,7 @@ MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 alsa ethernet pci" >> >> IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap" >> >> -IMAGE_BOOT_FILES_LEGACY = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin sysfw.itb" >> -IMAGE_BOOT_FILES_MULTI_CERT = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" >> - >> -IMAGE_BOOT_FILES ?= "${IMAGE_BOOT_FILES_LEGACY}" >> +IMAGE_BOOT_FILES ?= "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" >> >> WKS_FILE ?= "sdimage-2part.wks" >> do_image_wic[depends] += "virtual/bootloader:do_deploy" >> diff --git a/conf/machine/j7-evm.conf b/conf/machine/j7-evm.conf >> index 1f47f00c..514695d6 100644 >> --- a/conf/machine/j7-evm.conf >> +++ b/conf/machine/j7-evm.conf >> @@ -9,6 +9,9 @@ MACHINE_FEATURES += "gpu" >> SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" >> SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> >> +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb >> +IMAGE_BOOT_FILES += "sysfw.itb" >> + >> KERNEL_DEVICETREE = " \ >> ti/k3-j721e-common-proc-board.dtb \ >> ti/k3-j721e-proc-board-tps65917.dtb \ >> diff --git a/conf/machine/j7-hs-evm.conf b/conf/machine/j7-hs-evm.conf >> index ece0d85e..5cb2a3cd 100644 >> --- a/conf/machine/j7-hs-evm.conf >> +++ b/conf/machine/j7-hs-evm.conf >> @@ -20,7 +20,6 @@ UBOOT_SYMLINK = "u-boot.img" >> >> BBMULTICONFIG += "k3r5-sr1-1" >> >> -# Use default IMAGE_BOOT_FILES_LEGACY files >> # Since default sysfw.itb on J7 is for SR1.1, add a version for SR1.0 >> IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" >> do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" >> diff --git a/conf/machine/j7200-evm.conf b/conf/machine/j7200-evm.conf >> index 2565c90c..c8a03a7b 100644 >> --- a/conf/machine/j7200-evm.conf >> +++ b/conf/machine/j7200-evm.conf >> @@ -13,8 +13,5 @@ KERNEL_DEVICETREE = " \ >> >> UBOOT_MACHINE = "j7200_evm_a72_config" >> >> -# J7200 supports multi-certificate images, use the same >> -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" >> - >> do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> diff --git a/conf/machine/j721s2-evm.conf b/conf/machine/j721s2-evm.conf >> index 8cf3a414..ba5e8def 100644 >> --- a/conf/machine/j721s2-evm.conf >> +++ b/conf/machine/j721s2-evm.conf >> @@ -18,8 +18,5 @@ KERNEL_DEVICETREE = " \ >> >> UBOOT_MACHINE = "j721s2_evm_a72_defconfig" >> >> -# J721S2 supports multi-certificate images, use the same >> -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" >> - >> do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" >> -- >> 2.36.1
diff --git a/conf/machine/include/am62xx.inc b/conf/machine/include/am62xx.inc index 0364edd1..0231235f 100644 --- a/conf/machine/include/am62xx.inc +++ b/conf/machine/include/am62xx.inc @@ -8,9 +8,6 @@ SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_SYSTEM_SUSPEND = "1" -# AM62 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/conf/machine/include/am64xx.inc b/conf/machine/include/am64xx.inc index 8e8e146f..930fba08 100644 --- a/conf/machine/include/am64xx.inc +++ b/conf/machine/include/am64xx.inc @@ -14,9 +14,6 @@ KERNEL_DEVICETREE = " \ ti/k3-am642-evm-nand.dtbo \ " -# AM64 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/conf/machine/include/am65xx.inc b/conf/machine/include/am65xx.inc index 1898f19c..b70d212f 100644 --- a/conf/machine/include/am65xx.inc +++ b/conf/machine/include/am65xx.inc @@ -22,9 +22,12 @@ KERNEL_DEVICETREE = " \ BBMULTICONFIG += "k3r5-sr2" -# Use default IMAGE_BOOT_FILES_LEGACY files +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb +IMAGE_BOOT_FILES += "sysfw.itb" + # Since default sysfw.itb on AM65x is for SR2.0, add a version for SR1.0 IMAGE_BOOT_FILES += "sysfw-am65x-evm.itb" + do_image_wic[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" do_image_tar[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" diff --git a/conf/machine/include/j7.inc b/conf/machine/include/j7.inc index d3eda1a8..c187f299 100644 --- a/conf/machine/include/j7.inc +++ b/conf/machine/include/j7.inc @@ -4,8 +4,6 @@ SOC_FAMILY_append = ":j7" OPTEEMACHINE = "k3-j721e" OPTEEOUTPUTMACHINE = "k3" -# Use default IMAGE_BOOT_FILES_LEGACY files - # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "j721e j7200" TI_PDK_LIMIT_BOARDS = "j721e_evm j7200_evm" diff --git a/conf/machine/include/k3.inc b/conf/machine/include/k3.inc index f85e6b98..24741dee 100644 --- a/conf/machine/include/k3.inc +++ b/conf/machine/include/k3.inc @@ -41,10 +41,7 @@ MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 alsa ethernet pci" IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap" -IMAGE_BOOT_FILES_LEGACY = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin sysfw.itb" -IMAGE_BOOT_FILES_MULTI_CERT = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" - -IMAGE_BOOT_FILES ?= "${IMAGE_BOOT_FILES_LEGACY}" +IMAGE_BOOT_FILES ?= "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" WKS_FILE ?= "sdimage-2part.wks" do_image_wic[depends] += "virtual/bootloader:do_deploy" diff --git a/conf/machine/j7-evm.conf b/conf/machine/j7-evm.conf index 1f47f00c..514695d6 100644 --- a/conf/machine/j7-evm.conf +++ b/conf/machine/j7-evm.conf @@ -9,6 +9,9 @@ MACHINE_FEATURES += "gpu" SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb +IMAGE_BOOT_FILES += "sysfw.itb" + KERNEL_DEVICETREE = " \ ti/k3-j721e-common-proc-board.dtb \ ti/k3-j721e-proc-board-tps65917.dtb \ diff --git a/conf/machine/j7-hs-evm.conf b/conf/machine/j7-hs-evm.conf index ece0d85e..5cb2a3cd 100644 --- a/conf/machine/j7-hs-evm.conf +++ b/conf/machine/j7-hs-evm.conf @@ -20,7 +20,6 @@ UBOOT_SYMLINK = "u-boot.img" BBMULTICONFIG += "k3r5-sr1-1" -# Use default IMAGE_BOOT_FILES_LEGACY files # Since default sysfw.itb on J7 is for SR1.1, add a version for SR1.0 IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" diff --git a/conf/machine/j7200-evm.conf b/conf/machine/j7200-evm.conf index 2565c90c..c8a03a7b 100644 --- a/conf/machine/j7200-evm.conf +++ b/conf/machine/j7200-evm.conf @@ -13,8 +13,5 @@ KERNEL_DEVICETREE = " \ UBOOT_MACHINE = "j7200_evm_a72_config" -# J7200 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/conf/machine/j721s2-evm.conf b/conf/machine/j721s2-evm.conf index 8cf3a414..ba5e8def 100644 --- a/conf/machine/j721s2-evm.conf +++ b/conf/machine/j721s2-evm.conf @@ -18,8 +18,5 @@ KERNEL_DEVICETREE = " \ UBOOT_MACHINE = "j721s2_evm_a72_defconfig" -# J721S2 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
Only the first two K3 devices do not support multi-cert boot so lets make multi-cert the default and only add back sysfw.itb for these two devices. Signed-off-by: Andrew Davis <afd@ti.com> --- conf/machine/include/am62xx.inc | 3 --- conf/machine/include/am64xx.inc | 3 --- conf/machine/include/am65xx.inc | 5 ++++- conf/machine/include/j7.inc | 2 -- conf/machine/include/k3.inc | 5 +---- conf/machine/j7-evm.conf | 3 +++ conf/machine/j7-hs-evm.conf | 1 - conf/machine/j7200-evm.conf | 3 --- conf/machine/j721s2-evm.conf | 3 --- 9 files changed, 8 insertions(+), 20 deletions(-)