diff mbox series

[meta-oe] lmsensors: Clean stale files for sensord to avoid incorrect GCC header dependencies

Message ID 20250410091111.82723-1-haixiao.yan.cn@eng.windriver.com
State Accepted
Headers show
Series [meta-oe] lmsensors: Clean stale files for sensord to avoid incorrect GCC header dependencies | expand

Commit Message

haixiao.yan.cn@eng.windriver.com April 10, 2025, 9:11 a.m. UTC 
From: Haixiao Yan <haixiao.yan.cn@windriver.com>

After upgrading GCC—for example, from 14.1.0 to 14.2.0—building lmsensors that
was previously compiled with GCC 14.1.0 may fail with an error like:
lmsensors/3.6.0/recipe-sysroot-native/usr/lib/x86_64-wrs-linux/gcc/x86_64-wrs-linux/
14.1.0/include/stddef.h can't find, which is needed by 'prog/sensord/args.rd'.

This occurs because prog/sensord/args.rd still references stale headers from the
older GCC version.
The root cause is that stale *.rd and *.ro files under prog/sensord are not
properly cleaned during do_configure. This patch ensures those files are removed
to prevent broken dependencies when GCC is upgraded.
Also remove the same statement in do_compile.

Signed-off-by: Haixiao Yan <haixiao.yan.cn@windriver.com>
---
 meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Leonard Anderweit April 23, 2025, 12:45 p.m. UTC | #1 
Hi,

the build of lmsensors fails this patch applied and PACKAGECONFIG = "".
I've attached the do_install log with the error.
The problem occurs on master and scarthgap.

A possible solution is:

do_install() {
-    oe_runmake user_install DESTDIR=${D}
+    oe_runmake user_install DESTDIR=${D} PROG_EXTRA="sensors
${PACKAGECONFIG_CONFARGS}"

Leonard

Am Donnerstag, dem 10.04.2025 um 17:11 +0800 schrieb Yan, Haixiao (CN)
via lists.openembedded.org:
> From: Haixiao Yan <haixiao.yan.cn@windriver.com>
> 
> After upgrading GCC—for example, from 14.1.0 to 14.2.0—building
> lmsensors that
> was previously compiled with GCC 14.1.0 may fail with an error like:
> lmsensors/3.6.0/recipe-sysroot-native/usr/lib/x86_64-wrs-
> linux/gcc/x86_64-wrs-linux/
> 14.1.0/include/stddef.h can't find, which is needed by
> 'prog/sensord/args.rd'.
> 
> This occurs because prog/sensord/args.rd still references stale
> headers from the
> older GCC version.
> The root cause is that stale *.rd and *.ro files under prog/sensord
> are not
> properly cleaned during do_configure. This patch ensures those files
> are removed
> to prevent broken dependencies when GCC is upgraded.
> Also remove the same statement in do_compile.
> 
> Signed-off-by: Haixiao Yan <haixiao.yan.cn@windriver.com>
> ---
>  meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> index 07027225c58b..9b072d70b20e 100644
> --- a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> +++ b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> @@ -51,8 +51,11 @@ EXTRA_OEMAKE = 'EXLDFLAGS="${LDFLAGS}" \
>          LIBDIR=${libdir} \
>          CC="${CC}" AR="${AR}"'
>  
> +do_configure:prepend() {
> +    sed -i -e 's:^#\(PROG_EXTRA\):\1:' ${S}/Makefile
> +}
> +
>  do_compile() {
> -    sed -i -e 's:^# \(PROG_EXTRA\):\1:' ${S}/Makefile
>      # Respect LDFLAGS
>      sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' ${S}/Makefile
>      sed -i -e 's/\$(LIBSHSONAME) -o/$(LIBSHSONAME) \$(LDFLAGS) -o/g'
> \
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#116765):
> https://lists.openembedded.org/g/openembedded-devel/message/116765
> Mute This Topic: https://lists.openembedded.org/mt/112188003/7270266
> Group Owner: openembedded-devel+owner@lists.openembedded.org
> Unsubscribe:
> https://lists.openembedded.org/g/openembedded-devel/unsub [
> L.Anderweit@phytec.de]
> -=-=-=-=-=-=-=-=-=-=-=-
>
DEBUG: Executing python function extend_recipe_sysroot
NOTE: Direct dependencies are ['/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-core/glibc/glibc_2.39.bb:do_populate_sysroot', '/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-core/initscripts/initscripts_1.0.bb:do_populate_sysroot', '/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-core/systemd/systemd-systemctl-native.bb:do_populate_sysroot', '/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-core/update-rc.d/update-rc.d_0.8.bb:do_populate_sysroot', '/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/gcc/gcc-cross_13.3.bb:do_populate_sysroot', '/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/gcc/gcc-runtime_13.3.bb:do_populate_sysroot', '/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_populate_sysroot', 'virtual:native:/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/bison/bison_3.8.2.bb:do_populate_sysroot', 'virtual:native:/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/flex/flex_2.6.4.bb:do_populate_sysroot', 'virtual:native:/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'virtual:native:/home/anderweit/imx8mp-nxp-scarthgap/sources/poky/../poky/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot']
NOTE: Installed into sysroot: []
NOTE: Skipping as already exists in sysroot: ['gettext-minimal-native', 'glibc', 'initscripts', 'systemd-systemctl-native', 'update-rc.d', 'binutils-cross-aarch64', 'gcc-cross-aarch64', 'gcc-runtime', 'libgcc', 'libtool-native', 'm4-native', 'quilt-native', 'texinfo-dummy-native', 'linux-libc-headers', 'zlib-native', 'bison-native', 'flex-native', 'gnu-config-native', 'patch-native', 'pseudo-native', 'xz-native', 'zstd-native', 'attr-native', 'gmp-native', 'libmpc-native', 'mpfr-native', 'sqlite3-native']
DEBUG: Python function extend_recipe_sysroot finished
DEBUG: Executing shell function do_install
NOTE: make -j 48 EXLDFLAGS=-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  -Wl,-z,relro,-z,now MACHINE=aarch64 PREFIX=/usr MANDIR=/usr/share/man LIBDIR=/usr/lib CC=aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot AR=aarch64-phytec-linux-gcc-ar user_install DESTDIR=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/image
aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot -M -MG -DETCDIR="\"/etc\"" -I. -Wall -O2 -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W -Wmissing-prototypes -Wundef  -O2 -pipe -g -feliminate-unused-debug-types   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  prog/sensord/args.c | \
sed -e 's@^\(.*\)\.o:@prog/sensord/args.rd prog/sensord/args.ro: Makefile '`dirname prog/sensord/args.rd`/Module.mk' @' > prog/sensord/args.rd
aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot -M -MG -DETCDIR="\"/etc\"" -I. -Wall -O2 -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W -Wmissing-prototypes -Wundef  -O2 -pipe -g -feliminate-unused-debug-types   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  prog/sensord/chips.c | \
sed -e 's@^\(.*\)\.o:@prog/sensord/chips.rd prog/sensord/chips.ro: Makefile '`dirname prog/sensord/chips.rd`/Module.mk' @' > prog/sensord/chips.rd
aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot -M -MG -DETCDIR="\"/etc\"" -I. -Wall -O2 -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W -Wmissing-prototypes -Wundef  -O2 -pipe -g -feliminate-unused-debug-types   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  prog/sensord/lib.c | \
sed -e 's@^\(.*\)\.o:@prog/sensord/lib.rd prog/sensord/lib.ro: Makefile '`dirname prog/sensord/lib.rd`/Module.mk' @' > prog/sensord/lib.rd
aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot -M -MG -DETCDIR="\"/etc\"" -I. -Wall -O2 -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W -Wmissing-prototypes -Wundef  -O2 -pipe -g -feliminate-unused-debug-types   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  prog/sensord/rrd.c | \
sed -e 's@^\(.*\)\.o:@prog/sensord/rrd.rd prog/sensord/rrd.ro: Makefile '`dirname prog/sensord/rrd.rd`/Module.mk' @' > prog/sensord/rrd.rd
aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot -M -MG -DETCDIR="\"/etc\"" -I. -Wall -O2 -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W -Wmissing-prototypes -Wundef  -O2 -pipe -g -feliminate-unused-debug-types   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  prog/sensord/sense.c | \
sed -e 's@^\(.*\)\.o:@prog/sensord/sense.rd prog/sensord/sense.ro: Makefile '`dirname prog/sensord/sense.rd`/Module.mk' @' > prog/sensord/sense.rd
aarch64-phytec-linux-gcc  -mcpu=cortex-a53+crc+crypto -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot -M -MG -DETCDIR="\"/etc\"" -I. -Wall -O2 -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W -Wmissing-prototypes -Wundef  -O2 -pipe -g -feliminate-unused-debug-types   -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/git=/usr/src/debug/lmsensors/3.6.0  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fmacro-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot=  -fdebug-prefix-map=/home/anderweit/imx8mp-nxp-scarthgap/build/tmp-ampliphy-vendor/work/cortexa53-crypto-phytec-linux/lmsensors/3.6.0/recipe-sysroot-native=  prog/sensord/sensord.c | \
sed -e 's@^\(.*\)\.o:@prog/sensord/sensord.rd prog/sensord/sensord.ro: Makefile '`dirname prog/sensord/sensord.rd`/Module.mk' @' > prog/sensord/sensord.rd
make: *** No rule to make target 'rrd.h', needed by 'prog/sensord/rrd.rd'.  Stop.
ERROR: oe_runmake failed
WARNING: exit code 1 from a shell command.
Khem Raj April 23, 2025, 3:50 p.m. UTC | #2 
On Wed, Apr 23, 2025 at 5:45 AM Leonard Anderweit via
lists.openembedded.org <L.Anderweit=phytec.de@lists.openembedded.org>
wrote:
>
> Hi,
>
> the build of lmsensors fails this patch applied and PACKAGECONFIG = "".
> I've attached the do_install log with the error.
> The problem occurs on master and scarthgap.
>
> A possible solution is:
>
> do_install() {
> -    oe_runmake user_install DESTDIR=${D}
> +    oe_runmake user_install DESTDIR=${D} PROG_EXTRA="sensors
> ${PACKAGECONFIG_CONFARGS}"
>

since we are doing same cmd in do_compile as well perhaps it might be
better to add it via
EXTRA_OEMAKE so it can be then used in both places automatically

> Leonard
>
> Am Donnerstag, dem 10.04.2025 um 17:11 +0800 schrieb Yan, Haixiao (CN)
> via lists.openembedded.org:
> > From: Haixiao Yan <haixiao.yan.cn@windriver.com>
> >
> > After upgrading GCC—for example, from 14.1.0 to 14.2.0—building
> > lmsensors that
> > was previously compiled with GCC 14.1.0 may fail with an error like:
> > lmsensors/3.6.0/recipe-sysroot-native/usr/lib/x86_64-wrs-
> > linux/gcc/x86_64-wrs-linux/
> > 14.1.0/include/stddef.h can't find, which is needed by
> > 'prog/sensord/args.rd'.
> >
> > This occurs because prog/sensord/args.rd still references stale
> > headers from the
> > older GCC version.
> > The root cause is that stale *.rd and *.ro files under prog/sensord
> > are not
> > properly cleaned during do_configure. This patch ensures those files
> > are removed
> > to prevent broken dependencies when GCC is upgraded.
> > Also remove the same statement in do_compile.
> >
> > Signed-off-by: Haixiao Yan <haixiao.yan.cn@windriver.com>
> > ---
> >  meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > index 07027225c58b..9b072d70b20e 100644
> > --- a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > +++ b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > @@ -51,8 +51,11 @@ EXTRA_OEMAKE = 'EXLDFLAGS="${LDFLAGS}" \
> >          LIBDIR=${libdir} \
> >          CC="${CC}" AR="${AR}"'
> >
> > +do_configure:prepend() {
> > +    sed -i -e 's:^#\(PROG_EXTRA\):\1:' ${S}/Makefile
> > +}
> > +
> >  do_compile() {
> > -    sed -i -e 's:^# \(PROG_EXTRA\):\1:' ${S}/Makefile
> >      # Respect LDFLAGS
> >      sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' ${S}/Makefile
> >      sed -i -e 's/\$(LIBSHSONAME) -o/$(LIBSHSONAME) \$(LDFLAGS) -o/g'
> > \
> >
> >
> >
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#117077): https://lists.openembedded.org/g/openembedded-devel/message/117077
> Mute This Topic: https://lists.openembedded.org/mt/112188003/1997914
> Group Owner: openembedded-devel+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-devel/unsub [raj.khem@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
Leonard Anderweit April 24, 2025, 7:08 a.m. UTC | #3 
Am Mittwoch, dem 23.04.2025 um 08:50 -0700 schrieb Khem Raj:
> On Wed, Apr 23, 2025 at 5:45 AM Leonard Anderweit via
> lists.openembedded.org <L.Anderweit=phytec.de@lists.openembedded.org>
> wrote:
> > 
> > Hi,
> > 
> > the build of lmsensors fails this patch applied and PACKAGECONFIG =
> > "".
> > I've attached the do_install log with the error.
> > The problem occurs on master and scarthgap.
> > 
> > A possible solution is:
> > 
> > do_install() {
> > -    oe_runmake user_install DESTDIR=${D}
> > +    oe_runmake user_install DESTDIR=${D} PROG_EXTRA="sensors
> > ${PACKAGECONFIG_CONFARGS}"
> > 
> 
> since we are doing same cmd in do_compile as well perhaps it might be
> better to add it via
> EXTRA_OEMAKE so it can be then used in both places automatically

I'll try that and send a patch.
> 
> > Leonard
> > 
> > Am Donnerstag, dem 10.04.2025 um 17:11 +0800 schrieb Yan, Haixiao
> > (CN)
> > via lists.openembedded.org:
> > > From: Haixiao Yan <haixiao.yan.cn@windriver.com>
> > > 
> > > After upgrading GCC—for example, from 14.1.0 to 14.2.0—building
> > > lmsensors that
> > > was previously compiled with GCC 14.1.0 may fail with an error
> > > like:
> > > lmsensors/3.6.0/recipe-sysroot-native/usr/lib/x86_64-wrs-
> > > linux/gcc/x86_64-wrs-linux/
> > > 14.1.0/include/stddef.h can't find, which is needed by
> > > 'prog/sensord/args.rd'.
> > > 
> > > This occurs because prog/sensord/args.rd still references stale
> > > headers from the
> > > older GCC version.
> > > The root cause is that stale *.rd and *.ro files under
> > > prog/sensord
> > > are not
> > > properly cleaned during do_configure. This patch ensures those
> > > files
> > > are removed
> > > to prevent broken dependencies when GCC is upgraded.
> > > Also remove the same statement in do_compile.
> > > 
> > > Signed-off-by: Haixiao Yan <haixiao.yan.cn@windriver.com>
> > > ---
> > >  meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb | 5 ++++-
> > >  1 file changed, 4 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > > b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > > index 07027225c58b..9b072d70b20e 100644
> > > --- a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > > +++ b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
> > > @@ -51,8 +51,11 @@ EXTRA_OEMAKE = 'EXLDFLAGS="${LDFLAGS}" \
> > >          LIBDIR=${libdir} \
> > >          CC="${CC}" AR="${AR}"'
> > > 
> > > +do_configure:prepend() {
> > > +    sed -i -e 's:^#\(PROG_EXTRA\):\1:' ${S}/Makefile
> > > +}
> > > +
> > >  do_compile() {
> > > -    sed -i -e 's:^# \(PROG_EXTRA\):\1:' ${S}/Makefile
> > >      # Respect LDFLAGS
> > >      sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g'
> > > ${S}/Makefile
> > >      sed -i -e 's/\$(LIBSHSONAME) -o/$(LIBSHSONAME) \$(LDFLAGS) -
> > > o/g'
> > > \
> > > 
> > > 
> > > 
> > 
> > 
> > -=-=-=-=-=-=-=-=-=-=-=-
> > Links: You receive all messages sent to this group.
> > View/Reply Online (#117077):
> > https://lists.openembedded.org/g/openembedded-devel/message/117077
> > Mute This Topic:
> > https://lists.openembedded.org/mt/112188003/1997914
> > Group Owner: openembedded-devel+owner@lists.openembedded.org
> > Unsubscribe:
> > https://lists.openembedded.org/g/openembedded-devel/unsub [
> > raj.khem@gmail.com]
> > -=-=-=-=-=-=-=-=-=-=-=-
> >
diff mbox series

Patch

diff --git a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
index 07027225c58b..9b072d70b20e 100644
--- a/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
+++ b/meta-oe/recipes-bsp/lm_sensors/lmsensors_3.6.0.bb
@@ -51,8 +51,11 @@  EXTRA_OEMAKE = 'EXLDFLAGS="${LDFLAGS}" \
         LIBDIR=${libdir} \
         CC="${CC}" AR="${AR}"'
 
+do_configure:prepend() {
+    sed -i -e 's:^#\(PROG_EXTRA\):\1:' ${S}/Makefile
+}
+
 do_compile() {
-    sed -i -e 's:^# \(PROG_EXTRA\):\1:' ${S}/Makefile
     # Respect LDFLAGS
     sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' ${S}/Makefile
     sed -i -e 's/\$(LIBSHSONAME) -o/$(LIBSHSONAME) \$(LDFLAGS) -o/g' \