| Message ID | 20230705220737.3951895-1-afd@ti.com |
|---|---|
| State | Accepted |
| Delegated to: | Ryan Eatmon |
| Headers | show |
| Series | [meta-ti,master/kirkstone,v2] conf: machine: k3: Use ARM64 kernel load address in FIT | expand |
diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc index 494c667e..8f6f4014 100644 --- a/meta-ti-bsp/conf/machine/include/k3.inc +++ b/meta-ti-bsp/conf/machine/include/k3.inc @@ -19,8 +19,8 @@ KERNEL_IMAGETYPES = "Image fitImage" KERNEL_CLASSES += "kernel-fitimage" UBOOT_ARCH = "arm" -UBOOT_ENTRYPOINT = "0x80008000" -UBOOT_LOADADDRESS = "0x80008000" +UBOOT_ENTRYPOINT = "0x81000000" +UBOOT_LOADADDRESS = "0x81000000" UBOOT_RD_LOADADDRESS = "0x84000000" UBOOT_RD_ENTRYPOINT = "0x84000000" UBOOT_DTB_LOADADDRESS = "0x83000000"
The address 0x80008000 was used in pre-K3 devices. ARM64 requires the kernel loaded to a 2MB aligned address when not using KASLR. For FIT set the address to 0x81000000 which gives the kernel 32MB before running into the FDT at 0x83000000. If you get this error someday then your kernel is too large and either it or FDT needs relocated in memory: ERROR: image is not a fdt - must RESET the board to recover. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Praneeth Bajjuri <praneeth@ti.com> --- Changes from v1: - Use 0x81000000 to allow more space for the kernel image meta-ti-bsp/conf/machine/include/k3.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)