diff mbox series

[master,29/53] conf: machine: am62axx: Add overlays for IMX390 cameras

Message ID 20230320112452.2813505-30-denis@denix.org
State Accepted
Delegated to: Ryan Eatmon
Headers show
Series 2023.03 sync up with Dunfell | expand

Commit Message

Denys Dmytriyenko March 20, 2023, 11:24 a.m. UTC
From: Jai Luthra <j-luthra@ti.com>

IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally
targeted for J7-based devices, but AM62A can re-use the existing
overlays. Both the CM and RCM type of modules are supported.

As AM62A only has one CSI-RX port, we only use 4 out of the 8 total
FPDLink ports on the fusion board.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
---
 meta-ti-bsp/conf/machine/am62axx-evm.conf | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/meta-ti-bsp/conf/machine/am62axx-evm.conf b/meta-ti-bsp/conf/machine/am62axx-evm.conf
index 12492095..9dcb6e55 100644
--- a/meta-ti-bsp/conf/machine/am62axx-evm.conf
+++ b/meta-ti-bsp/conf/machine/am62axx-evm.conf
@@ -12,6 +12,14 @@  KERNEL_DEVICETREE = " \
     ti/k3-am62a7-fpdlink-ov2312-0-3.dtbo \
     ti/k3-am62a7-fpdlink-sk-fusion.dtbo \
     ti/k3-am62a7-sk-csi2-imx219.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-0.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-1.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-2.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-3.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-0.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-1.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-2.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-3.dtbo \
 "
 
 UBOOT_MACHINE = "am62ax_evm_a53_defconfig"