diff mbox series

[kirkstone,39/54] conf: machine: j721e-evm: Add camera overlays for J721E EVM

Message ID 20230320041241.1293077-40-denis@denix.org
State Accepted
Delegated to: Ryan Eatmon
Headers show
Series 2023.03 sync up with Dunfell | expand

Commit Message

Denys Dmytriyenko March 20, 2023, 4:12 a.m. UTC
From: Vaishnav Achath <vaishnav.a@ti.com>

Add the following overlay files on J721E EVM:

1. Fusion board (For FPDLink-III cameras)
2. IMX390 FPDLink camera module
3. IMX219 RPi-compatible camera module

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
---
 meta-ti-bsp/conf/machine/j721e-evm.conf | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf
index fe28e6f5..aa966263 100644
--- a/meta-ti-bsp/conf/machine/j721e-evm.conf
+++ b/meta-ti-bsp/conf/machine/j721e-evm.conf
@@ -10,7 +10,28 @@  SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
 KERNEL_DEVICETREE = " \
     ti/k3-j721e-common-proc-board.dtb \
     ti/k3-j721e-common-proc-board-infotainment.dtbo \
+    ti/k3-j721e-cpb-csi2-ov5640.dtbo \
+    ti/k3-j721e-fpdlink-cpb-fusion.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-0.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-1.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-2.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-0-3.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-1-0.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-1-1.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-1-2.dtbo \
+    ti/k3-j721e-fpdlink-imx390-cm-1-3.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-0.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-1.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-2.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-0-3.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-1-0.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-1-1.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-1-2.dtbo \
+    ti/k3-j721e-fpdlink-imx390-rcm-1-3.dtbo \
     ti/k3-j721e-sk.dtb \
+    ti/k3-j721e-fpdlink-sk-fusion.dtbo \
+    ti/k3-j721e-sk-csi2-ov5640.dtbo \
+    ti/k3-j721e-sk-rpi-cam-imx219.dtbo \
 "
 
 UBOOT_MACHINE = "j721e_evm_a72_config"