deleted file mode 100644
@@ -1,18 +0,0 @@
-
-This patch addresses the following clang failure: tayga-0.9.2/nat64.c:119:6:
-error: call to undeclared function 'writev'; ISO C99 and later do not support
-implicit function declarations [-Wimplicit-function-declaration]
-
-Upstream-Status: Pending
-Signed-off-by: Pawel Langowski <pawel.langowski@3mdeb.com>
-
---- tayga.h 2023-09-29 14:38:05.005837695 +0200
-+++ tayga-2.h 2023-09-29 14:37:45.560837257 +0200
-@@ -20,6 +20,7 @@
- #include <sys/stat.h>
- #include <sys/ioctl.h>
- #include <sys/socket.h>
-+#include <sys/uio.h>
- #include <netinet/in.h>
- #include <arpa/inet.h>
- #include <unistd.h>
deleted file mode 100644
@@ -1,103 +0,0 @@
-#
-# Sample configuration file for TAYGA 0.9.2
-#
-# Modify this to use your own addresses!!
-#
-
-#
-# TUN device that TAYGA will use to exchange IPv4 and IPv6 packets with the
-# kernel. You may use any name you like, but `nat64' is recommended.
-#
-# This device may be created before starting the tayga daemon by running
-# `tayga --mktun`. This allows routing and firewall rules to be set up prior
-# to commencement of packet translation.
-#
-# Mandatory.
-#
-tun-device nat64
-
-#
-# TAYGA's IPv4 address. This is NOT your router's IPv4 address! TAYGA
-# requires its own address because it acts as an IPv4 and IPv6 router, and
-# needs to be able to send ICMP messages. TAYGA will also respond to ICMP
-# echo requests (ping) at this address.
-#
-# This address can safely be located inside the dynamic-pool prefix.
-#
-# Mandatory.
-#
-ipv4-addr 192.168.254.1
-
-#
-# TAYGA's IPv6 address. This is NOT your router's IPv6 address! TAYGA
-# requires its own address because it acts as an IPv4 and IPv6 router, and
-# needs to be able to send ICMP messages. TAYGA will also respond to ICMP
-# echo requests (ping6) at this address.
-#
-# You can leave ipv6-addr unspecified and TAYGA will construct its IPv6
-# address using ipv4-addr and the NAT64 prefix.
-#
-# Optional if the NAT64 prefix is specified, otherwise mandatory. It is also
-# mandatory if the NAT64 prefix is 64:ff9b::/96 and ipv4-addr is a private
-# (RFC1918) address.
-#
-#ipv6-addr 2001:db8:1::2
-ipv6-addr fdaa:bb:1::1
-
-#
-# The NAT64 prefix. The IPv4 address space is mapped into the IPv6 address
-# space by prepending this prefix to the IPv4 address. Using a /96 prefix is
-# recommended in most situations, but all lengths specified in RFC 6052 are
-# supported.
-#
-# This must be a prefix selected from your organization's IPv6 address space
-# or the Well-Known Prefix 64:ff9b::/96. Note that using the Well-Known
-# Prefix will prohibit IPv6 hosts from contacting IPv4 hosts that have private
-# (RFC1918) addresses, per RFC 6052.
-#
-# The NAT64 prefix need not be specified if all required address mappings are
-# listed in `map' directives. (See below.)
-#
-# Optional.
-#
-##prefix 2001:db8:1:ffff::/96
-prefix 64:ff9b::/96
-
-#
-# Dynamic pool prefix. IPv6 hosts which send traffic through TAYGA (and do
-# not correspond to a static map or an IPv4-translatable address in the NAT64
-# prefix) will be assigned an IPv4 address from the dynamic pool. Dynamic
-# maps are valid for 124 minutes after the last matching packet is seen.
-#
-# If no unassigned addresses remain in the dynamic pool (or no dynamic pool is
-# configured), packets from unknown IPv6 hosts will be rejected with an ICMP
-# unreachable error.
-#
-# Optional.
-#
-dynamic-pool 192.168.254.0/24
-
-#
-# Persistent data storage directory. The dynamic.map file, which saves the
-# dynamic maps that are created from dynamic-pool, is stored in this
-# directory. Omit if you do not need these maps to be persistent between
-# instances of TAYGA.
-#
-# Optional.
-#
-data-dir /var/spool/tayga
-
-#
-# Establishes a single-host map. If an IPv6 host should be consistently
-# reachable at a specific IPv4 address, the mapping can be specified in a
-# `map' directive. (IPv6 hosts numbered with an IPv4-translatable address do
-# not need map directives.)
-#
-# IPv4 addresses specified in the `map' directive can safely be located inside
-# the dynamic-pool prefix.
-#
-# Optional.
-#
-#map 192.168.5.42 2001:db8:1:4444::1
-#map 192.168.5.43 2001:db8:1:4444::2
-#map 192.168.255.2 2001:db8:1:569::143
deleted file mode 100644
@@ -1,12 +0,0 @@
-[Unit]
-SourcePath=/usr/sbin/tayga
-Description=LSB: userspace NAT64
-
-[Service]
-Type=forking
-ExecStart=/usr/sbin/tayga -d --config /etc/tayga.conf
-RemainAfterExit=yes
-TimeoutStopSec=infinity
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,24 +0,0 @@
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
-
-SRC_URI = " \
- http://www.litech.org/tayga/tayga-${PV}.tar.bz2 \
- file://tayga.conf \
- file://tayga.service \
- file://0001-include-sys-uio.patch;striplevel=0 \
- "
-SRC_URI[sha256sum] = "2b1f7927a9d2dcff9095aff3c271924b052ccfd2faca9588b277431a44f0009c"
-
-SYSTEMD_PACKAGES = "${PN}"
-SYSTEMD_SERVICE:${PN} = "tayga.service"
-
-EXTRA_OEMAKE += "CFLAGS='${CFLAGS}'"
-
-do_install:append() {
- install -m 0644 ${UNPACKDIR}/tayga.conf ${D}${sysconfdir}/tayga.conf
- install -d ${D}${systemd_unitdir}/system/
- install -m 0644 ${UNPACKDIR}/tayga.service ${D}${systemd_unitdir}/system/
-}
-
-inherit autotools systemd
-
new file mode 100644
@@ -0,0 +1,39 @@
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+SRC_URI = "git://github.com/apalrd/tayga.git;branch=main;protocol=https;tag=${PV}"
+SRCREV = "7f00122b75d808f696df0efe481a8c8919ba9bd7"
+
+UPSTREAM_CHECK_GITTAGREGEX = "(?P<pver>\d+(\.\d+)+)"
+
+SYSTEMD_PACKAGES = "${PN}"
+SYSTEMD_SERVICE:${PN} = "tayga@.service"
+SYSTEMD_AUTO_ENABLE = "disable"
+
+EXTRA_OEMAKE = "CC='${CC}' CFLAGS='${CFLAGS}' LDFLAGS='${LDFLAGS}'"
+
+do_configure[noexec] = "1"
+
+do_compile() {
+ oe_runmake
+}
+
+do_install() {
+ oe_runmake install \
+ DESTDIR=${D} \
+ prefix=${prefix} \
+ exec_prefix=${exec_prefix} \
+ sbindir=${sbindir} \
+ datarootdir=${datadir} \
+ mandir=${mandir} \
+ sysconfdir=${sysconfdir} \
+ servicedir=${systemd_system_unitdir} \
+ WITH_SYSTEMD=1
+
+ install -d ${D}${sysconfdir}/tayga
+ install -m 0644 ${S}/tayga.conf.example ${D}${sysconfdir}/tayga/default.conf
+}
+
+inherit systemd
+
+RRECOMMENDS:${PN} += "kernel-module-tun"
\ No newline at end of file