| Message ID | 20240922155437.716488-1-leon.anavi@konsulko.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [meta-oe] valkey: Add recipe | expand |
On Sun, Sep 22, 2024 at 8:54 AM Leon Anavi via lists.openembedded.org <leon.anavi=konsulko.com@lists.openembedded.org> wrote: > > Valkey is an open source, in-memory data store. Release 8.0.0 is > fully compatible with Redis OSS 7.2.4 and brings: > > - Added full client info to SHUTDOWN and CLUSTER FAILOVER logs for > better traceability of requests. > - Resolved issues in replicationSetPrimary where the primary node's > IP/port updates were not correctly handled in the cluster gossip > section. > - Fixed AOF base suffix during rewrites when modifying the > aof-use-rdb-preamble setting, ensuring correct suffix caching to > prevent inconsistencies. > - Addressed rare crashes in async IO threads with TLS by preventing > concurrent read and write job overlap. > - Prevented AOF from being incorrectly disabled after loading RDB > data, ensuring proper re-enabling of AOF. > - Triggered a save of the cluster configuration file before > shutdown to prevent inconsistencies caused by unsaved node > configuration changes. > - Fixed timing issue in CLUSTER SETSLOT to ensure replicas handle > migration correctly when receiving the command before the gossip > update. > - Optimized the handling of temporary set objects in SUNION and > SDIFF commands, resulting in a 41% performance improvement for > SUNION and 27% for SDIFF. > > Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> > --- > .../0001-src-Do-not-reset-FINAL_LIBS.patch | 33 + > .../valkey/valkey/GNU_SOURCE-7.patch | 29 + > .../hiredis-use-default-CC-if-it-is-set.patch | 41 + > .../valkey/valkey/init-valkey-server | 71 + > ...ile-to-use-environment-build-setting.patch | 78 + > .../valkey/valkey/oe-use-libc-malloc.patch | 39 + > .../valkey/valkey/valkey.conf | 1314 +++++++++++++++++ > .../valkey/valkey/valkey.service | 16 + > .../recipes-extended/valkey/valkey_8.0.0.bb | 74 + > .../python/python3-pikepdf/run-ptest | 3 + > .../python/python3-pikepdf_8.6.0.bb | 45 + please make adding pikepdf recipe as a separate patch, there is no dependency that valkey seems to have on it. secondly, fix pikepdf to build correctly. see https://errors.yoctoproject.org/Errors/Build/192098/ > 11 files changed, 1743 insertions(+) > create mode 100644 meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch > create mode 100644 meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch > create mode 100644 meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch > create mode 100755 meta-oe/recipes-extended/valkey/valkey/init-valkey-server > create mode 100644 meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch > create mode 100644 meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch > create mode 100644 meta-oe/recipes-extended/valkey/valkey/valkey.conf > create mode 100644 meta-oe/recipes-extended/valkey/valkey/valkey.service > create mode 100644 meta-oe/recipes-extended/valkey/valkey_8.0.0.bb > create mode 100644 meta-python/recipes-devtools/python/python3-pikepdf/run-ptest > create mode 100644 meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb > > diff --git a/meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch b/meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch > new file mode 100644 > index 000000000..ab2265bdb > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch > @@ -0,0 +1,33 @@ > +From b4cf6e677cec75a0d2b57dcb2960ad1e16908c82 Mon Sep 17 00:00:00 2001 > +From: Khem Raj <raj.khem@gmail.com> > +Date: Tue, 10 Sep 2019 20:04:26 -0700 > +Subject: [PATCH] src: Do not reset FINAL_LIBS > + > +This helps case where additional libraries are needed to be passed from > +environment to get it going > + > +e.g. -latomic is needed on clang/x86 to provide for 64bit atomics > + > +Upstream-Status: Pending > +Signed-off-by: Khem Raj <raj.khem@gmail.com> > +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> > +--- > + src/Makefile | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/src/Makefile b/src/Makefile > +index e0b1d2722..48988e271 100644 > +--- a/src/Makefile > ++++ b/src/Makefile > +@@ -145,7 +145,7 @@ ifeq ($(SERVER_TEST),yes) > + FINAL_CFLAGS +=-DSERVER_TEST=1 > + endif > + FINAL_LDFLAGS=$(LDFLAGS) $(OPT) $(SERVER_LDFLAGS) $(DEBUG) > +-FINAL_LIBS=-lm > ++FINAL_LIBS+=-lm > + DEBUG=-g -ggdb > + > + # Linux ARM32 needs -latomic at linking time > +-- > +2.39.5 > + > diff --git a/meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch b/meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch > new file mode 100644 > index 000000000..fa11d058f > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch > @@ -0,0 +1,29 @@ > +From f3dd59789e4a8b06777be2725c6c3e36050fd6ec Mon Sep 17 00:00:00 2001 > +From: Khem Raj <raj.khem@gmail.com> > +Date: Sat, 21 Dec 2019 12:09:51 -0800 > +Subject: [PATCH] Define _GNU_SOURCE to get PTHREAD_MUTEX_INITIALIZER > + > +Fixes > +| zmalloc.c:87:37: error: 'PTHREAD_MUTEX_DEFAULT' undeclared here (not in a function) > +| 87 | pthread_mutex_t used_memory_mutex = PTHREAD_MUTEX_INITIALIZER; > +| | ^~~~~~~~~~~~~~~~~~~~~~~~~ > + > +Upstream-Status: Pending > +Signed-off-by: Khem Raj <raj.khem@gmail.com> > +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> > +--- > + src/zmalloc.c | 1 + > + 1 file changed, 1 insertion(+) > + > +diff --git a/src/zmalloc.c b/src/zmalloc.c > +index 7b19107b6..bd365c11c 100644 > +--- a/src/zmalloc.c > ++++ b/src/zmalloc.c > +@@ -33,6 +33,7 @@ > + #include "solarisfixes.h" > + #include "serverassert.h" > + > ++#define _GNU_SOURCE > + #include <stdio.h> > + #include <stdlib.h> > + #include <stdint.h> > diff --git a/meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch b/meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch > new file mode 100644 > index 000000000..3168c5860 > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch > @@ -0,0 +1,41 @@ > +From 5e6c3052930f1d831d3479cb59533c08277700ff Mon Sep 17 00:00:00 2001 > +From: Venture Research <tech@ventureresearch.com> > +Date: Fri, 8 Feb 2013 17:39:52 -0600 > +Subject: [PATCH] hiredis: use default CC if it is set > +MIME-Version: 1.0 > +Content-Type: text/plain; charset=UTF-8 > +Content-Transfer-Encoding: 8bit > + > +Instead of trying to automagically figure out CC, which breaks with OE > +as CC has spaces in it, just skip it if one was already passed in. > + > +Signed-off-by: Venture Research <tech@ventureresearch.com> > + > +Update to work with 4.0.8 > +Signed-off-by: Alistair Francis <alistair.francis@wdc.com> > + > +Reworked for 6.0.4 > +Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> > + > +Reworked for 8.0.0 > +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> > + > +--- > +Upstream-Status: Pending > + > + deps/hiredis/Makefile | 2 -- > + 1 file changed, 2 deletions(-) > + > +diff --git a/deps/hiredis/Makefile b/deps/hiredis/Makefile > +index 4a3de1f6e..49bb525cd 100644 > +--- a/deps/hiredis/Makefile > ++++ b/deps/hiredis/Makefile > +@@ -36,8 +36,6 @@ endef > + export REDIS_TEST_CONFIG > + > + # Fallback to gcc when $CC is not in $PATH. > +-CC:=$(shell sh -c 'type $${CC%% *} >/dev/null 2>/dev/null && echo $(CC) || echo gcc') > +-CXX:=$(shell sh -c 'type $${CXX%% *} >/dev/null 2>/dev/null && echo $(CXX) || echo g++') > + OPTIMIZATION?=-O3 > + WARNINGS=-Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers > + DEBUG_FLAGS?= -g -ggdb > diff --git a/meta-oe/recipes-extended/valkey/valkey/init-valkey-server b/meta-oe/recipes-extended/valkey/valkey/init-valkey-server > new file mode 100755 > index 000000000..873179574 > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/init-valkey-server > @@ -0,0 +1,71 @@ > +#!/bin/sh > +# > +### BEGIN INIT INFO > +# Provides: valkey-server > +# Required-Start: $network > +# Required-Stop: $network > +# Default-Start: S 2 3 4 5 > +# Default-Stop: 0 1 6 > +# Short-Description: Redis, a key-value store > +# Description: Redis is an open source, advanced key-value store. > +# http://valkey.io > +### END INIT INFO > + > +test -f /usr/bin/valkey-server || exit 0 > + > +ARGS="/etc/valkey/valkey.conf" > + > +case "$1" in > + start) > + echo "Starting valkey-server..." > + start-stop-daemon --start --quiet --exec /usr/bin/valkey-server -- $ARGS > + ;; > + stop) > + echo "Stopping valkey-server..." > + start-stop-daemon --stop --quiet --exec /usr/bin/valkey-server > + ;; > + restart) > + echo "Stopping valkey-server..." > + start-stop-daemon --stop --quiet --exec /usr/bin/valkey-server > + > + # Since busybox implementation ignores --retry arguments repeatedly check > + # if the process is still running and try another signal after a timeout, > + # efectively simulating a stop with --retry=TERM/5/KILL/5 schedule. > + waitAfterTerm=5000000 # us / 5000 ms / 5 s > + waitAfterKill=5000000 # us / 5000 ms / 5 s > + waitStep=100000 # us / 100 ms / 0.1 s > + waited=0 > + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server > + processOff=$? > + while [ $processOff -eq 0 ] && [ $waited -le $waitAfterTerm ] ; do > + usleep ${waitStep} > + ((waited+=${waitStep})) > + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server > + processOff=$? > + done > + if [ $processOff -eq 0 ] ; then > + start-stop-daemon --stop --signal KILL --exec /usr/bin/valkey-server > + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server > + processOff=$? > + fi > + waited=0 > + while [ $processOff -eq 0 ] && [ $waited -le $waitAfterKill ] ; do > + usleep ${waitStep} > + ((waited+=${waitStep})) > + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server > + processOff=$? > + done > + # Here $processOff will indicate if waiting and retrying according to > + # the schedule ended in a successfull stop or not. > + > + echo "Starting valkey-server..." > + start-stop-daemon --start --quiet --exec /usr/bin/valkey-server -- $ARGS > + ;; > + *) > + echo "Usage: /etc/init.d/valkey-server {start|stop|restart}" > + exit 1 > + ;; > +esac > + > +exit 0 > + > diff --git a/meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch b/meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch > new file mode 100644 > index 000000000..1c3762638 > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch > @@ -0,0 +1,78 @@ > +From 892225f5101b1131434d323c55e79a93dc189609 Mon Sep 17 00:00:00 2001 > +From: Venture Research <tech@ventureresearch.com> > +Date: Fri, 8 Feb 2013 20:22:19 -0600 > +Subject: [PATCH] lua: update Makefile to use environment build settings > + > +OE-specific parameters, instead of overriding all of these simply use > +the ones that are already passed in. Also configure for only Linux... > + > +Signed-off-by: Venture Research <tech@ventureresearch.com> > + > +Updated to work with 3.0.x > + > +Signed-off-by: Armin Kuster <akust808@gmail.com> > + > +updated to work wtih 6.2.1 > +Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com> > +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> > +--- > +Upstream-Status: Pending > + > + deps/Makefile | 1 - > + deps/lua/Makefile | 1 - > + deps/lua/src/Makefile | 16 ++++++---------- > + 3 files changed, 6 insertions(+), 12 deletions(-) > + > +diff --git a/deps/Makefile b/deps/Makefile > +index f1e4bd6ce..b9e50d049 100644 > +--- a/deps/Makefile > ++++ b/deps/Makefile > +@@ -94,7 +94,6 @@ endif > + # lua's Makefile defines AR="ar rcu", which is unusual, and makes it more > + # challenging to cross-compile lua (and redis). These defines make it easier > + # to fit redis into cross-compilation environments, which typically set AR. > +-AR=ar > + ARFLAGS=rc > + > + lua: .make-prerequisites > +diff --git a/deps/lua/Makefile b/deps/lua/Makefile > +index 209a13244..72f4b2bf2 100644 > +--- a/deps/lua/Makefile > ++++ b/deps/lua/Makefile > +@@ -33,7 +33,6 @@ INSTALL_DATA= $(INSTALL) -m 0644 > + > + # Utilities. > + MKDIR= mkdir -p > +-RANLIB= ranlib > + > + # == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE ========= > + > +diff --git a/deps/lua/src/Makefile b/deps/lua/src/Makefile > +index f3bba2f81..1555ec028 100644 > +--- a/deps/lua/src/Makefile > ++++ b/deps/lua/src/Makefile > +@@ -5,18 +5,14 @@ > + # == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT ======================= > + > + # Your platform. See PLATS for possible values. > +-PLAT= none > ++PLAT= linux > + > +-CC?= gcc > +-CFLAGS= -O2 -Wall $(MYCFLAGS) > +-AR= ar rcu > +-RANLIB= ranlib > +-RM= rm -f > +-LIBS= -lm $(MYLIBS) > +- > +-MYCFLAGS= > ++MYCFLAGS=-DLUA_USE_LINUX > + MYLDFLAGS= > +-MYLIBS= > ++MYLIBS=-Wl,-E -ldl -lreadline -lhistory -lncurses > ++ > ++CFLAGS += $(MYCFLAGS) > ++LIBS += -lm $(MYLIBS) > + > + # == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE ========= > + > diff --git a/meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch b/meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch > new file mode 100644 > index 000000000..3bab01e3f > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch > @@ -0,0 +1,39 @@ > +From ad79a81d6582555e580bdba42c959477e7d35ae7 Mon Sep 17 00:00:00 2001 > +From: Venture Research <tech@ventureresearch.com> > +Date: Wed, 6 Feb 2013 20:51:02 -0600 > +Subject: [PATCH] hack to force use of libc malloc > + > +Hack to force libc usage as it seems the option to pass it in has been > +removed in favor of magic. > + > +Note that this of course doesn't allow tcmalloc and jemalloc, however > +jemalloc wasn't building correctly. > + > +Signed-off-by: Venture Research <tech@ventureresearch.com> > + > +Update to work with 4.0.8 > +Signed-off-by: Alistair Francis <alistair.francis@wdc.com> > + > +Update to work with 8.0.0 > +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> > + > +--- > +Upstream-Status: Pending > + > + src/Makefile | 3 ++- > + 1 file changed, 2 insertions(+), 1 deletion(-) > + > +diff --git a/src/Makefile b/src/Makefile > +index 13fa1c027..e0b1d2722 100644 > +--- a/src/Makefile > ++++ b/src/Makefile > +@@ -13,7 +13,8 @@ > + # Just use 'make dep', but this is only needed by developers. > + > + release_hdr := $(shell sh -c './mkreleasehdr.sh') > +-uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not') > ++# use fake uname option to force use of generic libc > ++uname_S := "USE_LIBC_MALLOC" > + uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not') > + CLANG := $(findstring clang,$(shell sh -c '$(CC) --version | head -1')) > + > diff --git a/meta-oe/recipes-extended/valkey/valkey/valkey.conf b/meta-oe/recipes-extended/valkey/valkey/valkey.conf > new file mode 100644 > index 000000000..5efff8fd4 > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/valkey.conf > @@ -0,0 +1,1314 @@ > +# Redis configuration file example. > +# > +# Note that in order to read the configuration file, Redis must be > +# started with the file path as first argument: > +# > +# ./valkey-server /path/to/valkey.conf > + > +# Note on units: when memory size is needed, it is possible to specify > +# it in the usual form of 1k 5GB 4M and so forth: > +# > +# 1k => 1000 bytes > +# 1kb => 1024 bytes > +# 1m => 1000000 bytes > +# 1mb => 1024*1024 bytes > +# 1g => 1000000000 bytes > +# 1gb => 1024*1024*1024 bytes > +# > +# units are case insensitive so 1GB 1Gb 1gB are all the same. > + > +################################## INCLUDES ################################### > + > +# Include one or more other config files here. This is useful if you > +# have a standard template that goes to all Redis servers but also need > +# to customize a few per-server settings. Include files can include > +# other files, so use this wisely. > +# > +# Notice option "include" won't be rewritten by command "CONFIG REWRITE" > +# from admin or Redis Sentinel. Since Redis always uses the last processed > +# line as value of a configuration directive, you'd better put includes > +# at the beginning of this file to avoid overwriting config change at runtime. > +# > +# If instead you are interested in using includes to override configuration > +# options, it is better to use include as the last line. > +# > +# include /path/to/local.conf > +# include /path/to/other.conf > + > +################################## MODULES ##################################### > + > +# Load modules at startup. If the server is not able to load modules > +# it will abort. It is possible to use multiple loadmodule directives. > +# > +# loadmodule /path/to/my_module.so > +# loadmodule /path/to/other_module.so > + > +################################## NETWORK ##################################### > + > +# By default, if no "bind" configuration directive is specified, Redis listens > +# for connections from all the network interfaces available on the server. > +# It is possible to listen to just one or multiple selected interfaces using > +# the "bind" configuration directive, followed by one or more IP addresses. > +# > +# Examples: > +# > +# bind 192.168.1.100 10.0.0.1 > +# bind 127.0.0.1 ::1 > +# > +# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the > +# internet, binding to all the interfaces is dangerous and will expose the > +# instance to everybody on the internet. So by default we uncomment the > +# following bind directive, that will force Redis to listen only into > +# the IPv4 lookback interface address (this means Redis will be able to > +# accept connections only from clients running into the same computer it > +# is running). > +# > +# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES > +# JUST COMMENT THE FOLLOWING LINE. > +# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > +bind 127.0.0.1 > + > +# Protected mode is a layer of security protection, in order to avoid that > +# Redis instances left open on the internet are accessed and exploited. > +# > +# When protected mode is on and if: > +# > +# 1) The server is not binding explicitly to a set of addresses using the > +# "bind" directive. > +# 2) No password is configured. > +# > +# The server only accepts connections from clients connecting from the > +# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain > +# sockets. > +# > +# By default protected mode is enabled. You should disable it only if > +# you are sure you want clients from other hosts to connect to Redis > +# even if no authentication is configured, nor a specific set of interfaces > +# are explicitly listed using the "bind" directive. > +protected-mode yes > + > +# Accept connections on the specified port, default is 6379 (IANA #815344). > +# If port 0 is specified Redis will not listen on a TCP socket. > +port 6379 > + > +# TCP listen() backlog. > +# > +# In high requests-per-second environments you need an high backlog in order > +# to avoid slow clients connections issues. Note that the Linux kernel > +# will silently truncate it to the value of /proc/sys/net/core/somaxconn so > +# make sure to raise both the value of somaxconn and tcp_max_syn_backlog > +# in order to get the desired effect. > +tcp-backlog 511 > + > +# Unix socket. > +# > +# Specify the path for the Unix socket that will be used to listen for > +# incoming connections. There is no default, so Redis will not listen > +# on a unix socket when not specified. > +# > +# unixsocket /tmp/valkey.sock > +# unixsocketperm 700 > + > +# Close the connection after a client is idle for N seconds (0 to disable) > +timeout 0 > + > +# TCP keepalive. > +# > +# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence > +# of communication. This is useful for two reasons: > +# > +# 1) Detect dead peers. > +# 2) Take the connection alive from the point of view of network > +# equipment in the middle. > +# > +# On Linux, the specified value (in seconds) is the period used to send ACKs. > +# Note that to close the connection the double of the time is needed. > +# On other kernels the period depends on the kernel configuration. > +# > +# A reasonable value for this option is 300 seconds, which is the new > +# Redis default starting with Redis 3.2.1. > +tcp-keepalive 300 > + > +################################# GENERAL ##################################### > + > +# OE: run as a daemon. > +daemonize yes > + > +# If you run Redis from upstart or systemd, Redis can interact with your > +# supervision tree. Options: > +# supervised no - no supervision interaction > +# supervised upstart - signal upstart by putting Redis into SIGSTOP mode > +# supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET > +# supervised auto - detect upstart or systemd method based on > +# UPSTART_JOB or NOTIFY_SOCKET environment variables > +# Note: these supervision methods only signal "process is ready." > +# They do not enable continuous liveness pings back to your supervisor. > +supervised no > + > +# If a pid file is specified, Redis writes it where specified at startup > +# and removes it at exit. > +# > +# When the server runs non daemonized, no pid file is created if none is > +# specified in the configuration. When the server is daemonized, the pid file > +# is used even if not specified, defaulting to "/var/run/valkey.pid". > +# > +# Creating a pid file is best effort: if Redis is not able to create it > +# nothing bad happens, the server will start and run normally. > + > +# When running daemonized, Redis writes a pid file in /var/run/valkey.pid by > +# default. You can specify a custom pid file location here. > +pidfile /var/run/valkey.pid > + > +# Specify the server verbosity level. > +# This can be one of: > +# debug (a lot of information, useful for development/testing) > +# verbose (many rarely useful info, but not a mess like the debug level) > +# notice (moderately verbose, what you want in production probably) > +# warning (only very important / critical messages are logged) > +loglevel notice > + > +# Specify the log file name. Also the empty string can be used to force > +# Redis to log on the standard output. Note that if you use standard > +# output for logging but daemonize, logs will be sent to /dev/null > +logfile "" > + > +# To enable logging to the system logger, just set 'syslog-enabled' to yes, > +# and optionally update the other syslog parameters to suit your needs. > +syslog-enabled yes > + > +# Specify the syslog identity. > +syslog-ident valkey > + > +# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. > +# syslog-facility local0 > + > +# Set the number of databases. The default database is DB 0, you can select > +# a different one on a per-connection basis using SELECT <dbid> where > +# dbid is a number between 0 and 'databases'-1 > +databases 16 > + > +# By default Redis shows an ASCII art logo only when started to log to the > +# standard output and if the standard output is a TTY. Basically this means > +# that normally a logo is displayed only in interactive sessions. > +# > +# However it is possible to force the pre-4.0 behavior and always show a > +# ASCII art logo in startup logs by setting the following option to yes. > +always-show-logo yes > + > +################################ SNAPSHOTTING ################################ > +# > +# Save the DB on disk: > +# > +# save <seconds> <changes> > +# > +# Will save the DB if both the given number of seconds and the given > +# number of write operations against the DB occurred. > +# > +# In the example below the behaviour will be to save: > +# after 900 sec (15 min) if at least 1 key changed > +# after 300 sec (5 min) if at least 10 keys changed > +# after 60 sec if at least 10000 keys changed > +# > +# Note: you can disable saving completely by commenting out all "save" lines. > +# > +# It is also possible to remove all the previously configured save > +# points by adding a save directive with a single empty string argument > +# like in the following example: > +# > +# save "" > + > +#save 900 1 > +#save 300 10 > +#save 60 10000 > + > +# OE: tune for a small embedded system with a limited # of keys. > +save 120 1 > +save 60 100 > +save 30 1000 > + > +# By default Redis will stop accepting writes if RDB snapshots are enabled > +# (at least one save point) and the latest background save failed. > +# This will make the user aware (in a hard way) that data is not persisting > +# on disk properly, otherwise chances are that no one will notice and some > +# disaster will happen. > +# > +# If the background saving process will start working again Redis will > +# automatically allow writes again. > +# > +# However if you have setup your proper monitoring of the Redis server > +# and persistence, you may want to disable this feature so that Redis will > +# continue to work as usual even if there are problems with disk, > +# permissions, and so forth. > +stop-writes-on-bgsave-error yes > + > +# Compress string objects using LZF when dump .rdb databases? > +# For default that's set to 'yes' as it's almost always a win. > +# If you want to save some CPU in the saving child set it to 'no' but > +# the dataset will likely be bigger if you have compressible values or keys. > +rdbcompression yes > + > +# Since version 5 of RDB a CRC64 checksum is placed at the end of the file. > +# This makes the format more resistant to corruption but there is a performance > +# hit to pay (around 10%) when saving and loading RDB files, so you can disable it > +# for maximum performances. > +# > +# RDB files created with checksum disabled have a checksum of zero that will > +# tell the loading code to skip the check. > +rdbchecksum yes > + > +# The filename where to dump the DB > +dbfilename dump.rdb > + > +# The working directory. > +# > +# The DB will be written inside this directory, with the filename specified > +# above using the 'dbfilename' configuration directive. > +# > +# The Append Only File will also be created inside this directory. > +# > +# Note that you must specify a directory here, not a file name. > +dir /var/lib/valkey/ > + > +################################# REPLICATION ################################# > + > +# Master-Slave replication. Use slaveof to make a Redis instance a copy of > +# another Redis server. A few things to understand ASAP about Redis replication. > +# > +# 1) Redis replication is asynchronous, but you can configure a master to > +# stop accepting writes if it appears to be not connected with at least > +# a given number of slaves. > +# 2) Redis slaves are able to perform a partial resynchronization with the > +# master if the replication link is lost for a relatively small amount of > +# time. You may want to configure the replication backlog size (see the next > +# sections of this file) with a sensible value depending on your needs. > +# 3) Replication is automatic and does not need user intervention. After a > +# network partition slaves automatically try to reconnect to masters > +# and resynchronize with them. > +# > +# slaveof <masterip> <masterport> > + > +# If the master is password protected (using the "requirepass" configuration > +# directive below) it is possible to tell the slave to authenticate before > +# starting the replication synchronization process, otherwise the master will > +# refuse the slave request. > +# > +# masterauth <master-password> > + > +# When a slave loses its connection with the master, or when the replication > +# is still in progress, the slave can act in two different ways: > +# > +# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will > +# still reply to client requests, possibly with out of date data, or the > +# data set may just be empty if this is the first synchronization. > +# > +# 2) if slave-serve-stale-data is set to 'no' the slave will reply with > +# an error "SYNC with master in progress" to all the kind of commands > +# but to INFO and SLAVEOF. > +# > +slave-serve-stale-data yes > + > +# You can configure a slave instance to accept writes or not. Writing against > +# a slave instance may be useful to store some ephemeral data (because data > +# written on a slave will be easily deleted after resync with the master) but > +# may also cause problems if clients are writing to it because of a > +# misconfiguration. > +# > +# Since Redis 2.6 by default slaves are read-only. > +# > +# Note: read only slaves are not designed to be exposed to untrusted clients > +# on the internet. It's just a protection layer against misuse of the instance. > +# Still a read only slave exports by default all the administrative commands > +# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve > +# security of read only slaves using 'rename-command' to shadow all the > +# administrative / dangerous commands. > +slave-read-only yes > + > +# Replication SYNC strategy: disk or socket. > +# > +# ------------------------------------------------------- > +# WARNING: DISKLESS REPLICATION IS EXPERIMENTAL CURRENTLY > +# ------------------------------------------------------- > +# > +# New slaves and reconnecting slaves that are not able to continue the replication > +# process just receiving differences, need to do what is called a "full > +# synchronization". An RDB file is transmitted from the master to the slaves. > +# The transmission can happen in two different ways: > +# > +# 1) Disk-backed: The Redis master creates a new process that writes the RDB > +# file on disk. Later the file is transferred by the parent > +# process to the slaves incrementally. > +# 2) Diskless: The Redis master creates a new process that directly writes the > +# RDB file to slave sockets, without touching the disk at all. > +# > +# With disk-backed replication, while the RDB file is generated, more slaves > +# can be queued and served with the RDB file as soon as the current child producing > +# the RDB file finishes its work. With diskless replication instead once > +# the transfer starts, new slaves arriving will be queued and a new transfer > +# will start when the current one terminates. > +# > +# When diskless replication is used, the master waits a configurable amount of > +# time (in seconds) before starting the transfer in the hope that multiple slaves > +# will arrive and the transfer can be parallelized. > +# > +# With slow disks and fast (large bandwidth) networks, diskless replication > +# works better. > +repl-diskless-sync no > + > +# When diskless replication is enabled, it is possible to configure the delay > +# the server waits in order to spawn the child that transfers the RDB via socket > +# to the slaves. > +# > +# This is important since once the transfer starts, it is not possible to serve > +# new slaves arriving, that will be queued for the next RDB transfer, so the server > +# waits a delay in order to let more slaves arrive. > +# > +# The delay is specified in seconds, and by default is 5 seconds. To disable > +# it entirely just set it to 0 seconds and the transfer will start ASAP. > +repl-diskless-sync-delay 5 > + > +# Slaves send PINGs to server in a predefined interval. It's possible to change > +# this interval with the repl_ping_slave_period option. The default value is 10 > +# seconds. > +# > +# repl-ping-slave-period 10 > + > +# The following option sets the replication timeout for: > +# > +# 1) Bulk transfer I/O during SYNC, from the point of view of slave. > +# 2) Master timeout from the point of view of slaves (data, pings). > +# 3) Slave timeout from the point of view of masters (REPLCONF ACK pings). > +# > +# It is important to make sure that this value is greater than the value > +# specified for repl-ping-slave-period otherwise a timeout will be detected > +# every time there is low traffic between the master and the slave. > +# > +# repl-timeout 60 > + > +# Disable TCP_NODELAY on the slave socket after SYNC? > +# > +# If you select "yes" Redis will use a smaller number of TCP packets and > +# less bandwidth to send data to slaves. But this can add a delay for > +# the data to appear on the slave side, up to 40 milliseconds with > +# Linux kernels using a default configuration. > +# > +# If you select "no" the delay for data to appear on the slave side will > +# be reduced but more bandwidth will be used for replication. > +# > +# By default we optimize for low latency, but in very high traffic conditions > +# or when the master and slaves are many hops away, turning this to "yes" may > +# be a good idea. > +repl-disable-tcp-nodelay no > + > +# Set the replication backlog size. The backlog is a buffer that accumulates > +# slave data when slaves are disconnected for some time, so that when a slave > +# wants to reconnect again, often a full resync is not needed, but a partial > +# resync is enough, just passing the portion of data the slave missed while > +# disconnected. > +# > +# The bigger the replication backlog, the longer the time the slave can be > +# disconnected and later be able to perform a partial resynchronization. > +# > +# The backlog is only allocated once there is at least a slave connected. > +# > +# repl-backlog-size 1mb > + > +# After a master has no longer connected slaves for some time, the backlog > +# will be freed. The following option configures the amount of seconds that > +# need to elapse, starting from the time the last slave disconnected, for > +# the backlog buffer to be freed. > +# > +# Note that slaves never free the backlog for timeout, since they may be > +# promoted to masters later, and should be able to correctly "partially > +# resynchronize" with the slaves: hence they should always accumulate backlog. > +# > +# A value of 0 means to never release the backlog. > +# > +# repl-backlog-ttl 3600 > + > +# The slave priority is an integer number published by Redis in the INFO output. > +# It is used by Redis Sentinel in order to select a slave to promote into a > +# master if the master is no longer working correctly. > +# > +# A slave with a low priority number is considered better for promotion, so > +# for instance if there are three slaves with priority 10, 100, 25 Sentinel will > +# pick the one with priority 10, that is the lowest. > +# > +# However a special priority of 0 marks the slave as not able to perform the > +# role of master, so a slave with priority of 0 will never be selected by > +# Redis Sentinel for promotion. > +# > +# By default the priority is 100. > +slave-priority 100 > + > +# It is possible for a master to stop accepting writes if there are less than > +# N slaves connected, having a lag less or equal than M seconds. > +# > +# The N slaves need to be in "online" state. > +# > +# The lag in seconds, that must be <= the specified value, is calculated from > +# the last ping received from the slave, that is usually sent every second. > +# > +# This option does not GUARANTEE that N replicas will accept the write, but > +# will limit the window of exposure for lost writes in case not enough slaves > +# are available, to the specified number of seconds. > +# > +# For example to require at least 3 slaves with a lag <= 10 seconds use: > +# > +# min-slaves-to-write 3 > +# min-slaves-max-lag 10 > +# > +# Setting one or the other to 0 disables the feature. > +# > +# By default min-slaves-to-write is set to 0 (feature disabled) and > +# min-slaves-max-lag is set to 10. > + > +# A Redis master is able to list the address and port of the attached > +# slaves in different ways. For example the "INFO replication" section > +# offers this information, which is used, among other tools, by > +# Redis Sentinel in order to discover slave instances. > +# Another place where this info is available is in the output of the > +# "ROLE" command of a master. > +# > +# The listed IP and address normally reported by a slave is obtained > +# in the following way: > +# > +# IP: The address is auto detected by checking the peer address > +# of the socket used by the slave to connect with the master. > +# > +# Port: The port is communicated by the slave during the replication > +# handshake, and is normally the port that the slave is using to > +# list for connections. > +# > +# However when port forwarding or Network Address Translation (NAT) is > +# used, the slave may be actually reachable via different IP and port > +# pairs. The following two options can be used by a slave in order to > +# report to its master a specific set of IP and port, so that both INFO > +# and ROLE will report those values. > +# > +# There is no need to use both the options if you need to override just > +# the port or the IP address. > +# > +# slave-announce-ip 5.5.5.5 > +# slave-announce-port 1234 > + > +################################## SECURITY ################################### > + > +# Require clients to issue AUTH <PASSWORD> before processing any other > +# commands. This might be useful in environments in which you do not trust > +# others with access to the host running valkey-server. > +# > +# This should stay commented out for backward compatibility and because most > +# people do not need auth (e.g. they run their own servers). > +# > +# Warning: since Redis is pretty fast an outside user can try up to > +# 150k passwords per second against a good box. This means that you should > +# use a very strong password otherwise it will be very easy to break. > +# > +# requirepass foobared > + > +# Command renaming. > +# > +# It is possible to change the name of dangerous commands in a shared > +# environment. For instance the CONFIG command may be renamed into something > +# hard to guess so that it will still be available for internal-use tools > +# but not available for general clients. > +# > +# Example: > +# > +# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 > +# > +# It is also possible to completely kill a command by renaming it into > +# an empty string: > +# > +# rename-command CONFIG "" > +# > +# Please note that changing the name of commands that are logged into the > +# AOF file or transmitted to slaves may cause problems. > + > +################################### CLIENTS #################################### > + > +# Set the max number of connected clients at the same time. By default > +# this limit is set to 10000 clients, however if the Redis server is not > +# able to configure the process file limit to allow for the specified limit > +# the max number of allowed clients is set to the current file limit > +# minus 32 (as Redis reserves a few file descriptors for internal uses). > +# > +# Once the limit is reached Redis will close all the new connections sending > +# an error 'max number of clients reached'. > +# > +# maxclients 10000 > + > +############################## MEMORY MANAGEMENT ################################ > + > +# Set a memory usage limit to the specified amount of bytes. > +# When the memory limit is reached Redis will try to remove keys > +# according to the eviction policy selected (see maxmemory-policy). > +# > +# If Redis can't remove keys according to the policy, or if the policy is > +# set to 'noeviction', Redis will start to reply with errors to commands > +# that would use more memory, like SET, LPUSH, and so on, and will continue > +# to reply to read-only commands like GET. > +# > +# This option is usually useful when using Redis as an LRU or LFU cache, or to > +# set a hard memory limit for an instance (using the 'noeviction' policy). > +# > +# WARNING: If you have slaves attached to an instance with maxmemory on, > +# the size of the output buffers needed to feed the slaves are subtracted > +# from the used memory count, so that network problems / resyncs will > +# not trigger a loop where keys are evicted, and in turn the output > +# buffer of slaves is full with DELs of keys evicted triggering the deletion > +# of more keys, and so forth until the database is completely emptied. > +# > +# In short... if you have slaves attached it is suggested that you set a lower > +# limit for maxmemory so that there is some free RAM on the system for slave > +# output buffers (but this is not needed if the policy is 'noeviction'). > +# > +# maxmemory <bytes> > + > +# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory > +# is reached. You can select among five behaviors: > +# > +# volatile-lru -> Evict using approximated LRU among the keys with an expire set. > +# allkeys-lru -> Evict any key using approximated LRU. > +# volatile-lfu -> Evict using approximated LFU among the keys with an expire set. > +# allkeys-lfu -> Evict any key using approximated LFU. > +# volatile-random -> Remove a random key among the ones with an expire set. > +# allkeys-random -> Remove a random key, any key. > +# volatile-ttl -> Remove the key with the nearest expire time (minor TTL) > +# noeviction -> Don't evict anything, just return an error on write operations. > +# > +# LRU means Least Recently Used > +# LFU means Least Frequently Used > +# > +# Both LRU, LFU and volatile-ttl are implemented using approximated > +# randomized algorithms. > +# > +# Note: with any of the above policies, Redis will return an error on write > +# operations, when there are no suitable keys for eviction. > +# > +# At the date of writing these commands are: set setnx setex append > +# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd > +# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby > +# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby > +# getset mset msetnx exec sort > +# > +# The default is: > +# > +# maxmemory-policy noeviction > + > +# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated > +# algorithms (in order to save memory), so you can tune it for speed or > +# accuracy. For default Redis will check five keys and pick the one that was > +# used less recently, you can change the sample size using the following > +# configuration directive. > +# > +# The default of 5 produces good enough results. 10 Approximates very closely > +# true LRU but costs more CPU. 3 is faster but not very accurate. > +# > +# maxmemory-samples 5 > + > +############################# LAZY FREEING #################################### > + > +# Redis has two primitives to delete keys. One is called DEL and is a blocking > +# deletion of the object. It means that the server stops processing new commands > +# in order to reclaim all the memory associated with an object in a synchronous > +# way. If the key deleted is associated with a small object, the time needed > +# in order to execute the DEL command is very small and comparable to most other > +# O(1) or O(log_N) commands in Redis. However if the key is associated with an > +# aggregated value containing millions of elements, the server can block for > +# a long time (even seconds) in order to complete the operation. > +# > +# For the above reasons Redis also offers non blocking deletion primitives > +# such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and > +# FLUSHDB commands, in order to reclaim memory in background. Those commands > +# are executed in constant time. Another thread will incrementally free the > +# object in the background as fast as possible. > +# > +# DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled. > +# It's up to the design of the application to understand when it is a good > +# idea to use one or the other. However the Redis server sometimes has to > +# delete keys or flush the whole database as a side effect of other operations. > +# Specifically Redis deletes objects independently of a user call in the > +# following scenarios: > +# > +# 1) On eviction, because of the maxmemory and maxmemory policy configurations, > +# in order to make room for new data, without going over the specified > +# memory limit. > +# 2) Because of expire: when a key with an associated time to live (see the > +# EXPIRE command) must be deleted from memory. > +# 3) Because of a side effect of a command that stores data on a key that may > +# already exist. For example the RENAME command may delete the old key > +# content when it is replaced with another one. Similarly SUNIONSTORE > +# or SORT with STORE option may delete existing keys. The SET command > +# itself removes any old content of the specified key in order to replace > +# it with the specified string. > +# 4) During replication, when a slave performs a full resynchronization with > +# its master, the content of the whole database is removed in order to > +# load the RDB file just transfered. > +# > +# In all the above cases the default is to delete objects in a blocking way, > +# like if DEL was called. However you can configure each case specifically > +# in order to instead release memory in a non-blocking way like if UNLINK > +# was called, using the following configuration directives: > + > +lazyfree-lazy-eviction no > +lazyfree-lazy-expire no > +lazyfree-lazy-server-del no > +slave-lazy-flush no > + > +############################## APPEND ONLY MODE ############################### > + > +# By default Redis asynchronously dumps the dataset on disk. This mode is > +# good enough in many applications, but an issue with the Redis process or > +# a power outage may result into a few minutes of writes lost (depending on > +# the configured save points). > +# > +# The Append Only File is an alternative persistence mode that provides > +# much better durability. For instance using the default data fsync policy > +# (see later in the config file) Redis can lose just one second of writes in a > +# dramatic event like a server power outage, or a single write if something > +# wrong with the Redis process itself happens, but the operating system is > +# still running correctly. > +# > +# AOF and RDB persistence can be enabled at the same time without problems. > +# If the AOF is enabled on startup Redis will load the AOF, that is the file > +# with the better durability guarantees. > +# > +# Please check http://valkey.io/topics/persistence for more information. > + > +# OE: changed default to enable this > +appendonly yes > + > +# The name of the append only file (default: "appendonly.aof") > + > +appendfilename "appendonly.aof" > + > +# The fsync() call tells the Operating System to actually write data on disk > +# instead of waiting for more data in the output buffer. Some OS will really flush > +# data on disk, some other OS will just try to do it ASAP. > +# > +# Redis supports three different modes: > +# > +# no: don't fsync, just let the OS flush the data when it wants. Faster. > +# always: fsync after every write to the append only log. Slow, Safest. > +# everysec: fsync only one time every second. Compromise. > +# > +# The default is "everysec", as that's usually the right compromise between > +# speed and data safety. It's up to you to understand if you can relax this to > +# "no" that will let the operating system flush the output buffer when > +# it wants, for better performances (but if you can live with the idea of > +# some data loss consider the default persistence mode that's snapshotting), > +# or on the contrary, use "always" that's very slow but a bit safer than > +# everysec. > +# > +# More details please check the following article: > +# http://antirez.com/post/valkey-persistence-demystified.html > +# > +# If unsure, use "everysec". > + > +# appendfsync always > +appendfsync everysec > +# appendfsync no > + > +# When the AOF fsync policy is set to always or everysec, and a background > +# saving process (a background save or AOF log background rewriting) is > +# performing a lot of I/O against the disk, in some Linux configurations > +# Redis may block too long on the fsync() call. Note that there is no fix for > +# this currently, as even performing fsync in a different thread will block > +# our synchronous write(2) call. > +# > +# In order to mitigate this problem it's possible to use the following option > +# that will prevent fsync() from being called in the main process while a > +# BGSAVE or BGREWRITEAOF is in progress. > +# > +# This means that while another child is saving, the durability of Redis is > +# the same as "appendfsync none". In practical terms, this means that it is > +# possible to lose up to 30 seconds of log in the worst scenario (with the > +# default Linux settings). > +# > +# If you have latency problems turn this to "yes". Otherwise leave it as > +# "no" that is the safest pick from the point of view of durability. > + > +no-appendfsync-on-rewrite no > + > +# Automatic rewrite of the append only file. > +# Redis is able to automatically rewrite the log file implicitly calling > +# BGREWRITEAOF when the AOF log size grows by the specified percentage. > +# > +# This is how it works: Redis remembers the size of the AOF file after the > +# latest rewrite (if no rewrite has happened since the restart, the size of > +# the AOF at startup is used). > +# > +# This base size is compared to the current size. If the current size is > +# bigger than the specified percentage, the rewrite is triggered. Also > +# you need to specify a minimal size for the AOF file to be rewritten, this > +# is useful to avoid rewriting the AOF file even if the percentage increase > +# is reached but it is still pretty small. > +# > +# Specify a percentage of zero in order to disable the automatic AOF > +# rewrite feature. > + > +auto-aof-rewrite-percentage 100 > +auto-aof-rewrite-min-size 64mb > + > +# An AOF file may be found to be truncated at the end during the Redis > +# startup process, when the AOF data gets loaded back into memory. > +# This may happen when the system where Redis is running > +# crashes, especially when an ext4 filesystem is mounted without the > +# data=ordered option (however this can't happen when Redis itself > +# crashes or aborts but the operating system still works correctly). > +# > +# Redis can either exit with an error when this happens, or load as much > +# data as possible (the default now) and start if the AOF file is found > +# to be truncated at the end. The following option controls this behavior. > +# > +# If aof-load-truncated is set to yes, a truncated AOF file is loaded and > +# the Redis server starts emitting a log to inform the user of the event. > +# Otherwise if the option is set to no, the server aborts with an error > +# and refuses to start. When the option is set to no, the user requires > +# to fix the AOF file using the "valkey-check-aof" utility before to restart > +# the server. > +# > +# Note that if the AOF file will be found to be corrupted in the middle > +# the server will still exit with an error. This option only applies when > +# Redis will try to read more data from the AOF file but not enough bytes > +# will be found. > +aof-load-truncated yes > + > +# When rewriting the AOF file, Redis is able to use an RDB preamble in the > +# AOF file for faster rewrites and recoveries. When this option is turned > +# on the rewritten AOF file is composed of two different stanzas: > +# > +# [RDB file][AOF tail] > +# > +# When loading Redis recognizes that the AOF file starts with the "REDIS" > +# string and loads the prefixed RDB file, and continues loading the AOF > +# tail. > +# > +# This is currently turned off by default in order to avoid the surprise > +# of a format change, but will at some point be used as the default. > +aof-use-rdb-preamble no > + > +################################ LUA SCRIPTING ############################### > + > +# Max execution time of a Lua script in milliseconds. > +# > +# If the maximum execution time is reached Redis will log that a script is > +# still in execution after the maximum allowed time and will start to > +# reply to queries with an error. > +# > +# When a long running script exceeds the maximum execution time only the > +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be > +# used to stop a script that did not yet called write commands. The second > +# is the only way to shut down the server in the case a write command was > +# already issued by the script but the user doesn't want to wait for the natural > +# termination of the script. > +# > +# Set it to 0 or a negative value for unlimited execution without warnings. > +lua-time-limit 5000 > + > +################################ REDIS CLUSTER ############################### > +# > +# ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > +# WARNING EXPERIMENTAL: Redis Cluster is considered to be stable code, however > +# in order to mark it as "mature" we need to wait for a non trivial percentage > +# of users to deploy it in production. > +# ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > +# > +# Normal Redis instances can't be part of a Redis Cluster; only nodes that are > +# started as cluster nodes can. In order to start a Redis instance as a > +# cluster node enable the cluster support uncommenting the following: > +# > +# cluster-enabled yes > + > +# Every cluster node has a cluster configuration file. This file is not > +# intended to be edited by hand. It is created and updated by Redis nodes. > +# Every Redis Cluster node requires a different cluster configuration file. > +# Make sure that instances running in the same system do not have > +# overlapping cluster configuration file names. > +# > +# cluster-config-file nodes-6379.conf > + > +# Cluster node timeout is the amount of milliseconds a node must be unreachable > +# for it to be considered in failure state. > +# Most other internal time limits are multiple of the node timeout. > +# > +# cluster-node-timeout 15000 > + > +# A slave of a failing master will avoid to start a failover if its data > +# looks too old. > +# > +# There is no simple way for a slave to actually have an exact measure of > +# its "data age", so the following two checks are performed: > +# > +# 1) If there are multiple slaves able to failover, they exchange messages > +# in order to try to give an advantage to the slave with the best > +# replication offset (more data from the master processed). > +# Slaves will try to get their rank by offset, and apply to the start > +# of the failover a delay proportional to their rank. > +# > +# 2) Every single slave computes the time of the last interaction with > +# its master. This can be the last ping or command received (if the master > +# is still in the "connected" state), or the time that elapsed since the > +# disconnection with the master (if the replication link is currently down). > +# If the last interaction is too old, the slave will not try to failover > +# at all. > +# > +# The point "2" can be tuned by user. Specifically a slave will not perform > +# the failover if, since the last interaction with the master, the time > +# elapsed is greater than: > +# > +# (node-timeout * slave-validity-factor) + repl-ping-slave-period > +# > +# So for example if node-timeout is 30 seconds, and the slave-validity-factor > +# is 10, and assuming a default repl-ping-slave-period of 10 seconds, the > +# slave will not try to failover if it was not able to talk with the master > +# for longer than 310 seconds. > +# > +# A large slave-validity-factor may allow slaves with too old data to failover > +# a master, while a too small value may prevent the cluster from being able to > +# elect a slave at all. > +# > +# For maximum availability, it is possible to set the slave-validity-factor > +# to a value of 0, which means, that slaves will always try to failover the > +# master regardless of the last time they interacted with the master. > +# (However they'll always try to apply a delay proportional to their > +# offset rank). > +# > +# Zero is the only value able to guarantee that when all the partitions heal > +# the cluster will always be able to continue. > +# > +# cluster-slave-validity-factor 10 > + > +# Cluster slaves are able to migrate to orphaned masters, that are masters > +# that are left without working slaves. This improves the cluster ability > +# to resist to failures as otherwise an orphaned master can't be failed over > +# in case of failure if it has no working slaves. > +# > +# Slaves migrate to orphaned masters only if there are still at least a > +# given number of other working slaves for their old master. This number > +# is the "migration barrier". A migration barrier of 1 means that a slave > +# will migrate only if there is at least 1 other working slave for its master > +# and so forth. It usually reflects the number of slaves you want for every > +# master in your cluster. > +# > +# Default is 1 (slaves migrate only if their masters remain with at least > +# one slave). To disable migration just set it to a very large value. > +# A value of 0 can be set but is useful only for debugging and dangerous > +# in production. > +# > +# cluster-migration-barrier 1 > + > +# By default Redis Cluster nodes stop accepting queries if they detect there > +# is at least an hash slot uncovered (no available node is serving it). > +# This way if the cluster is partially down (for example a range of hash slots > +# are no longer covered) all the cluster becomes, eventually, unavailable. > +# It automatically returns available as soon as all the slots are covered again. > +# > +# However sometimes you want the subset of the cluster which is working, > +# to continue to accept queries for the part of the key space that is still > +# covered. In order to do so, just set the cluster-require-full-coverage > +# option to no. > +# > +# cluster-require-full-coverage yes > + > +# In order to setup your cluster make sure to read the documentation > +# available at http://valkey.io web site. > + > +########################## CLUSTER DOCKER/NAT support ######################## > + > +# In certain deployments, Redis Cluster nodes address discovery fails, because > +# addresses are NAT-ted or because ports are forwarded (the typical case is > +# Docker and other containers). > +# > +# In order to make Redis Cluster working in such environments, a static > +# configuration where each node knows its public address is needed. The > +# following two options are used for this scope, and are: > +# > +# * cluster-announce-ip > +# * cluster-announce-port > +# * cluster-announce-bus-port > +# > +# Each instruct the node about its address, client port, and cluster message > +# bus port. The information is then published in the header of the bus packets > +# so that other nodes will be able to correctly map the address of the node > +# publishing the information. > +# > +# If the above options are not used, the normal Redis Cluster auto-detection > +# will be used instead. > +# > +# Note that when remapped, the bus port may not be at the fixed offset of > +# clients port + 10000, so you can specify any port and bus-port depending > +# on how they get remapped. If the bus-port is not set, a fixed offset of > +# 10000 will be used as usually. > +# > +# Example: > +# > +# cluster-announce-ip 10.1.1.5 > +# cluster-announce-port 6379 > +# cluster-announce-bus-port 6380 > + > +################################## SLOW LOG ################################### > + > +# The Redis Slow Log is a system to log queries that exceeded a specified > +# execution time. The execution time does not include the I/O operations > +# like talking with the client, sending the reply and so forth, > +# but just the time needed to actually execute the command (this is the only > +# stage of command execution where the thread is blocked and can not serve > +# other requests in the meantime). > +# > +# You can configure the slow log with two parameters: one tells Redis > +# what is the execution time, in microseconds, to exceed in order for the > +# command to get logged, and the other parameter is the length of the > +# slow log. When a new command is logged the oldest one is removed from the > +# queue of logged commands. > + > +# The following time is expressed in microseconds, so 1000000 is equivalent > +# to one second. Note that a negative number disables the slow log, while > +# a value of zero forces the logging of every command. > +slowlog-log-slower-than 10000 > + > +# There is no limit to this length. Just be aware that it will consume memory. > +# You can reclaim memory used by the slow log with SLOWLOG RESET. > +slowlog-max-len 128 > + > +################################ LATENCY MONITOR ############################## > + > +# The Redis latency monitoring subsystem samples different operations > +# at runtime in order to collect data related to possible sources of > +# latency of a Redis instance. > +# > +# Via the LATENCY command this information is available to the user that can > +# print graphs and obtain reports. > +# > +# The system only logs operations that were performed in a time equal or > +# greater than the amount of milliseconds specified via the > +# latency-monitor-threshold configuration directive. When its value is set > +# to zero, the latency monitor is turned off. > +# > +# By default latency monitoring is disabled since it is mostly not needed > +# if you don't have latency issues, and collecting data has a performance > +# impact, that while very small, can be measured under big load. Latency > +# monitoring can easily be enabled at runtime using the command > +# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed. > +latency-monitor-threshold 0 > + > +############################# EVENT NOTIFICATION ############################## > + > +# Redis can notify Pub/Sub clients about events happening in the key space. > +# This feature is documented at http://valkey.io/topics/notifications > +# > +# For instance if keyspace events notification is enabled, and a client > +# performs a DEL operation on key "foo" stored in the Database 0, two > +# messages will be published via Pub/Sub: > +# > +# PUBLISH __keyspace@0__:foo del > +# PUBLISH __keyevent@0__:del foo > +# > +# It is possible to select the events that Redis will notify among a set > +# of classes. Every class is identified by a single character: > +# > +# K Keyspace events, published with __keyspace@<db>__ prefix. > +# E Keyevent events, published with __keyevent@<db>__ prefix. > +# g Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ... > +# $ String commands > +# l List commands > +# s Set commands > +# h Hash commands > +# z Sorted set commands > +# x Expired events (events generated every time a key expires) > +# e Evicted events (events generated when a key is evicted for maxmemory) > +# A Alias for g$lshzxe, so that the "AKE" string means all the events. > +# > +# The "notify-keyspace-events" takes as argument a string that is composed > +# of zero or multiple characters. The empty string means that notifications > +# are disabled. > +# > +# Example: to enable list and generic events, from the point of view of the > +# event name, use: > +# > +# notify-keyspace-events Elg > +# > +# Example 2: to get the stream of the expired keys subscribing to channel > +# name __keyevent@0__:expired use: > +# > +# notify-keyspace-events Ex > +# > +# By default all notifications are disabled because most users don't need > +# this feature and the feature has some overhead. Note that if you don't > +# specify at least one of K or E, no events will be delivered. > +notify-keyspace-events "" > + > +############################### ADVANCED CONFIG ############################### > + > +# Hashes are encoded using a memory efficient data structure when they have a > +# small number of entries, and the biggest entry does not exceed a given > +# threshold. These thresholds can be configured using the following directives. > +hash-max-ziplist-entries 512 > +hash-max-ziplist-value 64 > + > +# Lists are also encoded in a special way to save a lot of space. > +# The number of entries allowed per internal list node can be specified > +# as a fixed maximum size or a maximum number of elements. > +# For a fixed maximum size, use -5 through -1, meaning: > +# -5: max size: 64 Kb <-- not recommended for normal workloads > +# -4: max size: 32 Kb <-- not recommended > +# -3: max size: 16 Kb <-- probably not recommended > +# -2: max size: 8 Kb <-- good > +# -1: max size: 4 Kb <-- good > +# Positive numbers mean store up to _exactly_ that number of elements > +# per list node. > +# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size), > +# but if your use case is unique, adjust the settings as necessary. > +list-max-ziplist-size -2 > + > +# Lists may also be compressed. > +# Compress depth is the number of quicklist ziplist nodes from *each* side of > +# the list to *exclude* from compression. The head and tail of the list > +# are always uncompressed for fast push/pop operations. Settings are: > +# 0: disable all list compression > +# 1: depth 1 means "don't start compressing until after 1 node into the list, > +# going from either the head or tail" > +# So: [head]->node->node->...->node->[tail] > +# [head], [tail] will always be uncompressed; inner nodes will compress. > +# 2: [head]->[next]->node->node->...->node->[prev]->[tail] > +# 2 here means: don't compress head or head->next or tail->prev or tail, > +# but compress all nodes between them. > +# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail] > +# etc. > +list-compress-depth 0 > + > +# Sets have a special encoding in just one case: when a set is composed > +# of just strings that happen to be integers in radix 10 in the range > +# of 64 bit signed integers. > +# The following configuration setting sets the limit in the size of the > +# set in order to use this special memory saving encoding. > +set-max-intset-entries 512 > + > +# Similarly to hashes and lists, sorted sets are also specially encoded in > +# order to save a lot of space. This encoding is only used when the length and > +# elements of a sorted set are below the following limits: > +zset-max-ziplist-entries 128 > +zset-max-ziplist-value 64 > + > +# HyperLogLog sparse representation bytes limit. The limit includes the > +# 16 bytes header. When an HyperLogLog using the sparse representation crosses > +# this limit, it is converted into the dense representation. > +# > +# A value greater than 16000 is totally useless, since at that point the > +# dense representation is more memory efficient. > +# > +# The suggested value is ~ 3000 in order to have the benefits of > +# the space efficient encoding without slowing down too much PFADD, > +# which is O(N) with the sparse encoding. The value can be raised to > +# ~ 10000 when CPU is not a concern, but space is, and the data set is > +# composed of many HyperLogLogs with cardinality in the 0 - 15000 range. > +hll-sparse-max-bytes 3000 > + > +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in > +# order to help rehashing the main Redis hash table (the one mapping top-level > +# keys to values). The hash table implementation Redis uses (see dict.c) > +# performs a lazy rehashing: the more operation you run into a hash table > +# that is rehashing, the more rehashing "steps" are performed, so if the > +# server is idle the rehashing is never complete and some more memory is used > +# by the hash table. > +# > +# The default is to use this millisecond 10 times every second in order to > +# actively rehash the main dictionaries, freeing memory when possible. > +# > +# If unsure: > +# use "activerehashing no" if you have hard latency requirements and it is > +# not a good thing in your environment that Redis can reply from time to time > +# to queries with 2 milliseconds delay. > +# > +# use "activerehashing yes" if you don't have such hard requirements but > +# want to free memory asap when possible. > +activerehashing yes > + > +# The client output buffer limits can be used to force disconnection of clients > +# that are not reading data from the server fast enough for some reason (a > +# common reason is that a Pub/Sub client can't consume messages as fast as the > +# publisher can produce them). > +# > +# The limit can be set differently for the three different classes of clients: > +# > +# normal -> normal clients including MONITOR clients > +# slave -> slave clients > +# pubsub -> clients subscribed to at least one pubsub channel or pattern > +# > +# The syntax of every client-output-buffer-limit directive is the following: > +# > +# client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds> > +# > +# A client is immediately disconnected once the hard limit is reached, or if > +# the soft limit is reached and remains reached for the specified number of > +# seconds (continuously). > +# So for instance if the hard limit is 32 megabytes and the soft limit is > +# 16 megabytes / 10 seconds, the client will get disconnected immediately > +# if the size of the output buffers reach 32 megabytes, but will also get > +# disconnected if the client reaches 16 megabytes and continuously overcomes > +# the limit for 10 seconds. > +# > +# By default normal clients are not limited because they don't receive data > +# without asking (in a push way), but just after a request, so only > +# asynchronous clients may create a scenario where data is requested faster > +# than it can read. > +# > +# Instead there is a default limit for pubsub and slave clients, since > +# subscribers and slaves receive data in a push fashion. > +# > +# Both the hard or the soft limit can be disabled by setting them to zero. > +client-output-buffer-limit normal 0 0 0 > +client-output-buffer-limit slave 256mb 64mb 60 > +client-output-buffer-limit pubsub 32mb 8mb 60 > + > +# Client query buffers accumulate new commands. They are limited to a fixed > +# amount by default in order to avoid that a protocol desynchronization (for > +# instance due to a bug in the client) will lead to unbound memory usage in > +# the query buffer. However you can configure it here if you have very special > +# needs, such us huge multi/exec requests or alike. > +# > +# client-query-buffer-limit 1gb > + > +# In the Redis protocol, bulk requests, that are, elements representing single > +# strings, are normally limited ot 512 mb. However you can change this limit > +# here. > +# > +# proto-max-bulk-len 512mb > + > +# Redis calls an internal function to perform many background tasks, like > +# closing connections of clients in timeout, purging expired keys that are > +# never requested, and so forth. > +# > +# Not all tasks are performed with the same frequency, but Redis checks for > +# tasks to perform according to the specified "hz" value. > +# > +# By default "hz" is set to 10. Raising the value will use more CPU when > +# Redis is idle, but at the same time will make Redis more responsive when > +# there are many keys expiring at the same time, and timeouts may be > +# handled with more precision. > +# > +# The range is between 1 and 500, however a value over 100 is usually not > +# a good idea. Most users should use the default of 10 and raise this up to > +# 100 only in environments where very low latency is required. > +hz 10 > + > +# When a child rewrites the AOF file, if the following option is enabled > +# the file will be fsync-ed every 32 MB of data generated. This is useful > +# in order to commit the file to the disk more incrementally and avoid > +# big latency spikes. > +aof-rewrite-incremental-fsync yes > + > +# Redis LFU eviction (see maxmemory setting) can be tuned. However it is a good > +# idea to start with the default settings and only change them after investigating > +# how to improve the performances and how the keys LFU change over time, which > +# is possible to inspect via the OBJECT FREQ command. > +# > +# There are two tunable parameters in the Redis LFU implementation: the > +# counter logarithm factor and the counter decay time. It is important to > +# understand what the two parameters mean before changing them. > +# > +# The LFU counter is just 8 bits per key, it's maximum value is 255, so Redis > +# uses a probabilistic increment with logarithmic behavior. Given the value > +# of the old counter, when a key is accessed, the counter is incremented in > +# this way: > +# > +# 1. A random number R between 0 and 1 is extracted. > +# 2. A probability P is calculated as 1/(old_value*lfu_log_factor+1). > +# 3. The counter is incremented only if R < P. > +# > +# The default lfu-log-factor is 10. This is a table of how the frequency > +# counter changes with a different number of accesses with different > +# logarithmic factors: > +# > +# +--------+------------+------------+------------+------------+------------+ > +# | factor | 100 hits | 1000 hits | 100K hits | 1M hits | 10M hits | > +# +--------+------------+------------+------------+------------+------------+ > +# | 0 | 104 | 255 | 255 | 255 | 255 | > +# +--------+------------+------------+------------+------------+------------+ > +# | 1 | 18 | 49 | 255 | 255 | 255 | > +# +--------+------------+------------+------------+------------+------------+ > +# | 10 | 10 | 18 | 142 | 255 | 255 | > +# +--------+------------+------------+------------+------------+------------+ > +# | 100 | 8 | 11 | 49 | 143 | 255 | > +# +--------+------------+------------+------------+------------+------------+ > +# > +# NOTE: The above table was obtained by running the following commands: > +# > +# valkey-benchmark -n 1000000 incr foo > +# valkey-cli object freq foo > +# > +# NOTE 2: The counter initial value is 5 in order to give new objects a chance > +# to accumulate hits. > +# > +# The counter decay time is the time, in minutes, that must elapse in order > +# for the key counter to be divided by two (or decremented if it has a value > +# less <= 10). > +# > +# The default value for the lfu-decay-time is 1. A Special value of 0 means to > +# decay the counter every time it happens to be scanned. > +# > +# lfu-log-factor 10 > +# lfu-decay-time 1 > + > +########################### ACTIVE DEFRAGMENTATION ####################### > +# > +# WARNING THIS FEATURE IS EXPERIMENTAL. However it was stress tested > +# even in production and manually tested by multiple engineers for some > +# time. > +# > +# What is active defragmentation? > +# ------------------------------- > +# > +# Active (online) defragmentation allows a Redis server to compact the > +# spaces left between small allocations and deallocations of data in memory, > +# thus allowing to reclaim back memory. > +# > +# Fragmentation is a natural process that happens with every allocator (but > +# less so with Jemalloc, fortunately) and certain workloads. Normally a server > +# restart is needed in order to lower the fragmentation, or at least to flush > +# away all the data and create it again. However thanks to this feature > +# implemented by Oran Agra for Redis 4.0 this process can happen at runtime > +# in an "hot" way, while the server is running. > +# > +# Basically when the fragmentation is over a certain level (see the > +# configuration options below) Redis will start to create new copies of the > +# values in contiguous memory regions by exploiting certain specific Jemalloc > +# features (in order to understand if an allocation is causing fragmentation > +# and to allocate it in a better place), and at the same time, will release the > +# old copies of the data. This process, repeated incrementally for all the keys > +# will cause the fragmentation to drop back to normal values. > +# > +# Important things to understand: > +# > +# 1. This feature is disabled by default, and only works if you compiled Redis > +# to use the copy of Jemalloc we ship with the source code of Redis. > +# This is the default with Linux builds. > +# > +# 2. You never need to enable this feature if you don't have fragmentation > +# issues. > +# > +# 3. Once you experience fragmentation, you can enable this feature when > +# needed with the command "CONFIG SET activedefrag yes". > +# > +# The configuration parameters are able to fine tune the behavior of the > +# defragmentation process. If you are not sure about what they mean it is > +# a good idea to leave the defaults untouched. > + > +# Enabled active defragmentation > +# activedefrag yes > + > +# Minimum amount of fragmentation waste to start active defrag > +# active-defrag-ignore-bytes 100mb > + > +# Minimum percentage of fragmentation to start active defrag > +# active-defrag-threshold-lower 10 > + > +# Maximum percentage of fragmentation at which we use maximum effort > +# active-defrag-threshold-upper 100 > + > +# Minimal effort for defrag in CPU percentage > +# active-defrag-cycle-min 25 > + > +# Maximal effort for defrag in CPU percentage > +# active-defrag-cycle-max 75 > diff --git a/meta-oe/recipes-extended/valkey/valkey/valkey.service b/meta-oe/recipes-extended/valkey/valkey/valkey.service > new file mode 100644 > index 000000000..5c6aa5b17 > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey/valkey.service > @@ -0,0 +1,16 @@ > +[Unit] > +Description=Valkey: an open source, in-memory data store > +After=network.target > + > +[Service] > +User=valkey > +Group=valkey > +ExecStart=/usr/bin/valkey-server /etc/valkey/valkey.conf > +ExecStop=/usr/bin/valkey-cli shutdown > +Restart=always > +LimitNOFILE=10032 > +StateDirectory=valkey > + > +[Install] > +WantedBy=multi-user.target > + > diff --git a/meta-oe/recipes-extended/valkey/valkey_8.0.0.bb b/meta-oe/recipes-extended/valkey/valkey_8.0.0.bb > new file mode 100644 > index 000000000..373ebd469 > --- /dev/null > +++ b/meta-oe/recipes-extended/valkey/valkey_8.0.0.bb > @@ -0,0 +1,74 @@ > +SUMMARY = "Valkey key-value store" > +DESCRIPTION = "A flexible distributed key-value datastore that supports both caching and beyond caching workloads." > +HOMEPAGE = "http://valkey.io" > +SECTION = "libs" > +LICENSE = "BSD-3-Clause" > +LIC_FILES_CHKSUM = "file://COPYING;md5=f924153a31f3091d2c9c500317d53425" > +DEPENDS = "readline lua ncurses" > + > +SRC_URI = " \ > + git://github.com/valkey-io/valkey.git;branch=8.0;protocol=https \ > + file://valkey.conf \ > + file://init-valkey-server \ > + file://valkey.service \ > + file://hiredis-use-default-CC-if-it-is-set.patch \ > + file://lua-update-Makefile-to-use-environment-build-setting.patch \ > + file://oe-use-libc-malloc.patch \ > + file://0001-src-Do-not-reset-FINAL_LIBS.patch \ > + file://GNU_SOURCE-7.patch \ > +" > +SRCREV = "2b5c7a0dbd61fd4281ef6166b7d119ba7fe7368c" > + > +S = "${WORKDIR}/git" > + > +inherit autotools-brokensep pkgconfig update-rc.d systemd useradd > + > +FINAL_LIBS:x86:toolchain-clang = "-latomic" > +FINAL_LIBS:riscv32:toolchain-clang = "-latomic" > +FINAL_LIBS:mips = "-latomic" > +FINAL_LIBS:arm = "-latomic" > +FINAL_LIBS:powerpc = "-latomic" > + > +export FINAL_LIBS > + > +USERADD_PACKAGES = "${PN}" > +USERADD_PARAM:${PN} = "--system --home-dir /var/lib/valkey -g valkey --shell /bin/false valkey" > +GROUPADD_PARAM:${PN} = "--system valkey" > + > +PACKAGECONFIG = "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" > +PACKAGECONFIG[systemd] = "USE_SYSTEMD=yes,USE_SYSTEMD=no,systemd" > + > +EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}" > + > +do_compile:prepend() { > + (cd deps && oe_runmake hiredis lua linenoise) > +} > + > +do_install() { > + export PREFIX=${D}/${prefix} > + oe_runmake install > + install -d ${D}/${sysconfdir}/valkey > + install -m 0644 ${UNPACKDIR}/valkey.conf ${D}/${sysconfdir}/valkey/valkey.conf > + install -d ${D}/${sysconfdir}/init.d > + install -m 0755 ${UNPACKDIR}/init-valkey-server ${D}/${sysconfdir}/init.d/valkey-server > + install -d ${D}/var/lib/valkey/ > + chown valkey.valkey ${D}/var/lib/valkey/ > + > + install -d ${D}${systemd_system_unitdir} > + install -m 0644 ${UNPACKDIR}/valkey.service ${D}${systemd_system_unitdir} > + sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${systemd_system_unitdir}/valkey.service > + > + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then > + sed -i 's!daemonize yes!# daemonize yes!' ${D}/${sysconfdir}/valkey/valkey.conf > + sed -i 's!supervised no!supervised systemd!' ${D}/${sysconfdir}/valkey/valkey.conf > + fi > +} > + > +CONFFILES:${PN} = "${sysconfdir}/valkey/valkey.conf" > + > +INITSCRIPT_NAME = "valkey-server" > +INITSCRIPT_PARAMS = "defaults 87" > + > +SYSTEMD_SERVICE:${PN} = "valkey.service" > + > +CVE_STATUS[CVE-2022-3734] = "not-applicable-platform: CVE only applies for Windows." > diff --git a/meta-python/recipes-devtools/python/python3-pikepdf/run-ptest b/meta-python/recipes-devtools/python/python3-pikepdf/run-ptest > new file mode 100644 > index 000000000..b63c4de0d > --- /dev/null > +++ b/meta-python/recipes-devtools/python/python3-pikepdf/run-ptest > @@ -0,0 +1,3 @@ > +#!/bin/sh > + > +pytest -o log_cli=true -o log_cli_level=INFO | sed -e 's/\[...%\]//g'| sed -e 's/PASSED/PASS/g'| sed -e 's/FAILED/FAIL/g'|sed -e 's/SKIPPED/SKIP/g'| awk '{if ($NF=="PASS" || $NF=="FAIL" || $NF=="SKIP" || $NF=="XFAIL" || $NF=="XPASS"){printf "%s: %s\n", $NF, $0}else{print}}'| awk '{if ($NF=="PASS" || $NF=="FAIL" || $NF=="SKIP" || $NF=="XFAIL" || $NF=="XPASS") {$NF="";print $0}else{print}}' > diff --git a/meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb b/meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb > new file mode 100644 > index 000000000..076566f14 > --- /dev/null > +++ b/meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb > @@ -0,0 +1,45 @@ > +SUMMARY = "Read and write PDFs with Python, powered by qpdf" > +HOMEPAGE = "https://pypi.org/project/pikepdf" > +LICENSE = "MPL-2.0" > +LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=9741c346eef56131163e13b9db1241b3" > + > +SRC_URI[sha256sum] = "777e611e28cfa208ab61685df493fd695e9d180cf34cd97792e1a69decd8c533" > + > +inherit pypi pkgconfig python_setuptools_build_meta pypi python3-dir ptest > + > +PYPI_PACKAGE = "pikepdf" > +#S = "${WORKDIR}/${PYPI_PACKAGE}-${PV}" > + > +SRC_URI += " \ > + file://run-ptest \ > +" > + > +RDEPENDS:${PN}-ptest += " \ > + ${PYTHON_PN}-pytest \ > +" > + > +do_install_ptest() { > + install -d ${D}${PTEST_PATH}/tests > + cp -rf ${S}/tests/* ${D}${PTEST_PATH}/tests/ > +} > + > +DEPENDS += "python3-pybind11-native python3-wheel-native python3-pip-native python3-setuptools-scm-native qpdf" > +RDEPENDS:${PN} += "python3 python3-pillow python3-lxml qpdf python3-packaging" > + > +do_install:append() { > + cp -r ${WORKDIR}/${PYPI_PACKAGE}-${PV}/src/pikepdf/* ${D}${libdir}/${PYTHON_DIR}/site-packages/pikepdf/ > + > + # Workaround for "UNKNOWN-0.0.0.dist-info" > + mv ${D}${libdir}/${PYTHON_DIR}/site-packages/UNKNOWN-0.0.0.dist-info ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info > + # sed -i 's/0.0.0/${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/METADATA > + sed -i 's/UNKNOWN-0.0.0/${PYPI_PACKAGE}-${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/METADATA > + # sed -i 's/0.0.0/${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/RECORD > + sed -i 's/UNKNOWN-0.0.0/${PYPI_PACKAGE}-${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/RECORD > +} > + > +FILES:${PN} += " \ > + ${libdir}/${PYTHON_DIR}/site-packages/pikepdf \ > + ${libdir}/${PYTHON_DIR}/site-packages/pikepdf-${PV}.dist-info \ > +" > + > +BBCLASSEXTEND = "native nativesdk" > -- > 2.39.5 > > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#112451): https://lists.openembedded.org/g/openembedded-devel/message/112451 > Mute This Topic: https://lists.openembedded.org/mt/108592431/1997914 > Group Owner: openembedded-devel+owner@lists.openembedded.org > Unsubscribe: https://lists.openembedded.org/g/openembedded-devel/unsub [raj.khem@gmail.com] > -=-=-=-=-=-=-=-=-=-=-=- >
diff --git a/meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch b/meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch new file mode 100644 index 000000000..ab2265bdb --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch @@ -0,0 +1,33 @@ +From b4cf6e677cec75a0d2b57dcb2960ad1e16908c82 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem@gmail.com> +Date: Tue, 10 Sep 2019 20:04:26 -0700 +Subject: [PATCH] src: Do not reset FINAL_LIBS + +This helps case where additional libraries are needed to be passed from +environment to get it going + +e.g. -latomic is needed on clang/x86 to provide for 64bit atomics + +Upstream-Status: Pending +Signed-off-by: Khem Raj <raj.khem@gmail.com> +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> +--- + src/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/Makefile b/src/Makefile +index e0b1d2722..48988e271 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -145,7 +145,7 @@ ifeq ($(SERVER_TEST),yes) + FINAL_CFLAGS +=-DSERVER_TEST=1 + endif + FINAL_LDFLAGS=$(LDFLAGS) $(OPT) $(SERVER_LDFLAGS) $(DEBUG) +-FINAL_LIBS=-lm ++FINAL_LIBS+=-lm + DEBUG=-g -ggdb + + # Linux ARM32 needs -latomic at linking time +-- +2.39.5 + diff --git a/meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch b/meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch new file mode 100644 index 000000000..fa11d058f --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch @@ -0,0 +1,29 @@ +From f3dd59789e4a8b06777be2725c6c3e36050fd6ec Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem@gmail.com> +Date: Sat, 21 Dec 2019 12:09:51 -0800 +Subject: [PATCH] Define _GNU_SOURCE to get PTHREAD_MUTEX_INITIALIZER + +Fixes +| zmalloc.c:87:37: error: 'PTHREAD_MUTEX_DEFAULT' undeclared here (not in a function) +| 87 | pthread_mutex_t used_memory_mutex = PTHREAD_MUTEX_INITIALIZER; +| | ^~~~~~~~~~~~~~~~~~~~~~~~~ + +Upstream-Status: Pending +Signed-off-by: Khem Raj <raj.khem@gmail.com> +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> +--- + src/zmalloc.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/zmalloc.c b/src/zmalloc.c +index 7b19107b6..bd365c11c 100644 +--- a/src/zmalloc.c ++++ b/src/zmalloc.c +@@ -33,6 +33,7 @@ + #include "solarisfixes.h" + #include "serverassert.h" + ++#define _GNU_SOURCE + #include <stdio.h> + #include <stdlib.h> + #include <stdint.h> diff --git a/meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch b/meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch new file mode 100644 index 000000000..3168c5860 --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch @@ -0,0 +1,41 @@ +From 5e6c3052930f1d831d3479cb59533c08277700ff Mon Sep 17 00:00:00 2001 +From: Venture Research <tech@ventureresearch.com> +Date: Fri, 8 Feb 2013 17:39:52 -0600 +Subject: [PATCH] hiredis: use default CC if it is set +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Instead of trying to automagically figure out CC, which breaks with OE +as CC has spaces in it, just skip it if one was already passed in. + +Signed-off-by: Venture Research <tech@ventureresearch.com> + +Update to work with 4.0.8 +Signed-off-by: Alistair Francis <alistair.francis@wdc.com> + +Reworked for 6.0.4 +Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> + +Reworked for 8.0.0 +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> + +--- +Upstream-Status: Pending + + deps/hiredis/Makefile | 2 -- + 1 file changed, 2 deletions(-) + +diff --git a/deps/hiredis/Makefile b/deps/hiredis/Makefile +index 4a3de1f6e..49bb525cd 100644 +--- a/deps/hiredis/Makefile ++++ b/deps/hiredis/Makefile +@@ -36,8 +36,6 @@ endef + export REDIS_TEST_CONFIG + + # Fallback to gcc when $CC is not in $PATH. +-CC:=$(shell sh -c 'type $${CC%% *} >/dev/null 2>/dev/null && echo $(CC) || echo gcc') +-CXX:=$(shell sh -c 'type $${CXX%% *} >/dev/null 2>/dev/null && echo $(CXX) || echo g++') + OPTIMIZATION?=-O3 + WARNINGS=-Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers + DEBUG_FLAGS?= -g -ggdb diff --git a/meta-oe/recipes-extended/valkey/valkey/init-valkey-server b/meta-oe/recipes-extended/valkey/valkey/init-valkey-server new file mode 100755 index 000000000..873179574 --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/init-valkey-server @@ -0,0 +1,71 @@ +#!/bin/sh +# +### BEGIN INIT INFO +# Provides: valkey-server +# Required-Start: $network +# Required-Stop: $network +# Default-Start: S 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Redis, a key-value store +# Description: Redis is an open source, advanced key-value store. +# http://valkey.io +### END INIT INFO + +test -f /usr/bin/valkey-server || exit 0 + +ARGS="/etc/valkey/valkey.conf" + +case "$1" in + start) + echo "Starting valkey-server..." + start-stop-daemon --start --quiet --exec /usr/bin/valkey-server -- $ARGS + ;; + stop) + echo "Stopping valkey-server..." + start-stop-daemon --stop --quiet --exec /usr/bin/valkey-server + ;; + restart) + echo "Stopping valkey-server..." + start-stop-daemon --stop --quiet --exec /usr/bin/valkey-server + + # Since busybox implementation ignores --retry arguments repeatedly check + # if the process is still running and try another signal after a timeout, + # efectively simulating a stop with --retry=TERM/5/KILL/5 schedule. + waitAfterTerm=5000000 # us / 5000 ms / 5 s + waitAfterKill=5000000 # us / 5000 ms / 5 s + waitStep=100000 # us / 100 ms / 0.1 s + waited=0 + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server + processOff=$? + while [ $processOff -eq 0 ] && [ $waited -le $waitAfterTerm ] ; do + usleep ${waitStep} + ((waited+=${waitStep})) + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server + processOff=$? + done + if [ $processOff -eq 0 ] ; then + start-stop-daemon --stop --signal KILL --exec /usr/bin/valkey-server + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server + processOff=$? + fi + waited=0 + while [ $processOff -eq 0 ] && [ $waited -le $waitAfterKill ] ; do + usleep ${waitStep} + ((waited+=${waitStep})) + start-stop-daemon --stop --test --quiet --exec /usr/bin/valkey-server + processOff=$? + done + # Here $processOff will indicate if waiting and retrying according to + # the schedule ended in a successfull stop or not. + + echo "Starting valkey-server..." + start-stop-daemon --start --quiet --exec /usr/bin/valkey-server -- $ARGS + ;; + *) + echo "Usage: /etc/init.d/valkey-server {start|stop|restart}" + exit 1 + ;; +esac + +exit 0 + diff --git a/meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch b/meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch new file mode 100644 index 000000000..1c3762638 --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch @@ -0,0 +1,78 @@ +From 892225f5101b1131434d323c55e79a93dc189609 Mon Sep 17 00:00:00 2001 +From: Venture Research <tech@ventureresearch.com> +Date: Fri, 8 Feb 2013 20:22:19 -0600 +Subject: [PATCH] lua: update Makefile to use environment build settings + +OE-specific parameters, instead of overriding all of these simply use +the ones that are already passed in. Also configure for only Linux... + +Signed-off-by: Venture Research <tech@ventureresearch.com> + +Updated to work with 3.0.x + +Signed-off-by: Armin Kuster <akust808@gmail.com> + +updated to work wtih 6.2.1 +Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com> +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> +--- +Upstream-Status: Pending + + deps/Makefile | 1 - + deps/lua/Makefile | 1 - + deps/lua/src/Makefile | 16 ++++++---------- + 3 files changed, 6 insertions(+), 12 deletions(-) + +diff --git a/deps/Makefile b/deps/Makefile +index f1e4bd6ce..b9e50d049 100644 +--- a/deps/Makefile ++++ b/deps/Makefile +@@ -94,7 +94,6 @@ endif + # lua's Makefile defines AR="ar rcu", which is unusual, and makes it more + # challenging to cross-compile lua (and redis). These defines make it easier + # to fit redis into cross-compilation environments, which typically set AR. +-AR=ar + ARFLAGS=rc + + lua: .make-prerequisites +diff --git a/deps/lua/Makefile b/deps/lua/Makefile +index 209a13244..72f4b2bf2 100644 +--- a/deps/lua/Makefile ++++ b/deps/lua/Makefile +@@ -33,7 +33,6 @@ INSTALL_DATA= $(INSTALL) -m 0644 + + # Utilities. + MKDIR= mkdir -p +-RANLIB= ranlib + + # == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE ========= + +diff --git a/deps/lua/src/Makefile b/deps/lua/src/Makefile +index f3bba2f81..1555ec028 100644 +--- a/deps/lua/src/Makefile ++++ b/deps/lua/src/Makefile +@@ -5,18 +5,14 @@ + # == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT ======================= + + # Your platform. See PLATS for possible values. +-PLAT= none ++PLAT= linux + +-CC?= gcc +-CFLAGS= -O2 -Wall $(MYCFLAGS) +-AR= ar rcu +-RANLIB= ranlib +-RM= rm -f +-LIBS= -lm $(MYLIBS) +- +-MYCFLAGS= ++MYCFLAGS=-DLUA_USE_LINUX + MYLDFLAGS= +-MYLIBS= ++MYLIBS=-Wl,-E -ldl -lreadline -lhistory -lncurses ++ ++CFLAGS += $(MYCFLAGS) ++LIBS += -lm $(MYLIBS) + + # == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE ========= + diff --git a/meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch b/meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch new file mode 100644 index 000000000..3bab01e3f --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch @@ -0,0 +1,39 @@ +From ad79a81d6582555e580bdba42c959477e7d35ae7 Mon Sep 17 00:00:00 2001 +From: Venture Research <tech@ventureresearch.com> +Date: Wed, 6 Feb 2013 20:51:02 -0600 +Subject: [PATCH] hack to force use of libc malloc + +Hack to force libc usage as it seems the option to pass it in has been +removed in favor of magic. + +Note that this of course doesn't allow tcmalloc and jemalloc, however +jemalloc wasn't building correctly. + +Signed-off-by: Venture Research <tech@ventureresearch.com> + +Update to work with 4.0.8 +Signed-off-by: Alistair Francis <alistair.francis@wdc.com> + +Update to work with 8.0.0 +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> + +--- +Upstream-Status: Pending + + src/Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/src/Makefile b/src/Makefile +index 13fa1c027..e0b1d2722 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -13,7 +13,8 @@ + # Just use 'make dep', but this is only needed by developers. + + release_hdr := $(shell sh -c './mkreleasehdr.sh') +-uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not') ++# use fake uname option to force use of generic libc ++uname_S := "USE_LIBC_MALLOC" + uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not') + CLANG := $(findstring clang,$(shell sh -c '$(CC) --version | head -1')) + diff --git a/meta-oe/recipes-extended/valkey/valkey/valkey.conf b/meta-oe/recipes-extended/valkey/valkey/valkey.conf new file mode 100644 index 000000000..5efff8fd4 --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/valkey.conf @@ -0,0 +1,1314 @@ +# Redis configuration file example. +# +# Note that in order to read the configuration file, Redis must be +# started with the file path as first argument: +# +# ./valkey-server /path/to/valkey.conf + +# Note on units: when memory size is needed, it is possible to specify +# it in the usual form of 1k 5GB 4M and so forth: +# +# 1k => 1000 bytes +# 1kb => 1024 bytes +# 1m => 1000000 bytes +# 1mb => 1024*1024 bytes +# 1g => 1000000000 bytes +# 1gb => 1024*1024*1024 bytes +# +# units are case insensitive so 1GB 1Gb 1gB are all the same. + +################################## INCLUDES ################################### + +# Include one or more other config files here. This is useful if you +# have a standard template that goes to all Redis servers but also need +# to customize a few per-server settings. Include files can include +# other files, so use this wisely. +# +# Notice option "include" won't be rewritten by command "CONFIG REWRITE" +# from admin or Redis Sentinel. Since Redis always uses the last processed +# line as value of a configuration directive, you'd better put includes +# at the beginning of this file to avoid overwriting config change at runtime. +# +# If instead you are interested in using includes to override configuration +# options, it is better to use include as the last line. +# +# include /path/to/local.conf +# include /path/to/other.conf + +################################## MODULES ##################################### + +# Load modules at startup. If the server is not able to load modules +# it will abort. It is possible to use multiple loadmodule directives. +# +# loadmodule /path/to/my_module.so +# loadmodule /path/to/other_module.so + +################################## NETWORK ##################################### + +# By default, if no "bind" configuration directive is specified, Redis listens +# for connections from all the network interfaces available on the server. +# It is possible to listen to just one or multiple selected interfaces using +# the "bind" configuration directive, followed by one or more IP addresses. +# +# Examples: +# +# bind 192.168.1.100 10.0.0.1 +# bind 127.0.0.1 ::1 +# +# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the +# internet, binding to all the interfaces is dangerous and will expose the +# instance to everybody on the internet. So by default we uncomment the +# following bind directive, that will force Redis to listen only into +# the IPv4 lookback interface address (this means Redis will be able to +# accept connections only from clients running into the same computer it +# is running). +# +# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES +# JUST COMMENT THE FOLLOWING LINE. +# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +bind 127.0.0.1 + +# Protected mode is a layer of security protection, in order to avoid that +# Redis instances left open on the internet are accessed and exploited. +# +# When protected mode is on and if: +# +# 1) The server is not binding explicitly to a set of addresses using the +# "bind" directive. +# 2) No password is configured. +# +# The server only accepts connections from clients connecting from the +# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain +# sockets. +# +# By default protected mode is enabled. You should disable it only if +# you are sure you want clients from other hosts to connect to Redis +# even if no authentication is configured, nor a specific set of interfaces +# are explicitly listed using the "bind" directive. +protected-mode yes + +# Accept connections on the specified port, default is 6379 (IANA #815344). +# If port 0 is specified Redis will not listen on a TCP socket. +port 6379 + +# TCP listen() backlog. +# +# In high requests-per-second environments you need an high backlog in order +# to avoid slow clients connections issues. Note that the Linux kernel +# will silently truncate it to the value of /proc/sys/net/core/somaxconn so +# make sure to raise both the value of somaxconn and tcp_max_syn_backlog +# in order to get the desired effect. +tcp-backlog 511 + +# Unix socket. +# +# Specify the path for the Unix socket that will be used to listen for +# incoming connections. There is no default, so Redis will not listen +# on a unix socket when not specified. +# +# unixsocket /tmp/valkey.sock +# unixsocketperm 700 + +# Close the connection after a client is idle for N seconds (0 to disable) +timeout 0 + +# TCP keepalive. +# +# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence +# of communication. This is useful for two reasons: +# +# 1) Detect dead peers. +# 2) Take the connection alive from the point of view of network +# equipment in the middle. +# +# On Linux, the specified value (in seconds) is the period used to send ACKs. +# Note that to close the connection the double of the time is needed. +# On other kernels the period depends on the kernel configuration. +# +# A reasonable value for this option is 300 seconds, which is the new +# Redis default starting with Redis 3.2.1. +tcp-keepalive 300 + +################################# GENERAL ##################################### + +# OE: run as a daemon. +daemonize yes + +# If you run Redis from upstart or systemd, Redis can interact with your +# supervision tree. Options: +# supervised no - no supervision interaction +# supervised upstart - signal upstart by putting Redis into SIGSTOP mode +# supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET +# supervised auto - detect upstart or systemd method based on +# UPSTART_JOB or NOTIFY_SOCKET environment variables +# Note: these supervision methods only signal "process is ready." +# They do not enable continuous liveness pings back to your supervisor. +supervised no + +# If a pid file is specified, Redis writes it where specified at startup +# and removes it at exit. +# +# When the server runs non daemonized, no pid file is created if none is +# specified in the configuration. When the server is daemonized, the pid file +# is used even if not specified, defaulting to "/var/run/valkey.pid". +# +# Creating a pid file is best effort: if Redis is not able to create it +# nothing bad happens, the server will start and run normally. + +# When running daemonized, Redis writes a pid file in /var/run/valkey.pid by +# default. You can specify a custom pid file location here. +pidfile /var/run/valkey.pid + +# Specify the server verbosity level. +# This can be one of: +# debug (a lot of information, useful for development/testing) +# verbose (many rarely useful info, but not a mess like the debug level) +# notice (moderately verbose, what you want in production probably) +# warning (only very important / critical messages are logged) +loglevel notice + +# Specify the log file name. Also the empty string can be used to force +# Redis to log on the standard output. Note that if you use standard +# output for logging but daemonize, logs will be sent to /dev/null +logfile "" + +# To enable logging to the system logger, just set 'syslog-enabled' to yes, +# and optionally update the other syslog parameters to suit your needs. +syslog-enabled yes + +# Specify the syslog identity. +syslog-ident valkey + +# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. +# syslog-facility local0 + +# Set the number of databases. The default database is DB 0, you can select +# a different one on a per-connection basis using SELECT <dbid> where +# dbid is a number between 0 and 'databases'-1 +databases 16 + +# By default Redis shows an ASCII art logo only when started to log to the +# standard output and if the standard output is a TTY. Basically this means +# that normally a logo is displayed only in interactive sessions. +# +# However it is possible to force the pre-4.0 behavior and always show a +# ASCII art logo in startup logs by setting the following option to yes. +always-show-logo yes + +################################ SNAPSHOTTING ################################ +# +# Save the DB on disk: +# +# save <seconds> <changes> +# +# Will save the DB if both the given number of seconds and the given +# number of write operations against the DB occurred. +# +# In the example below the behaviour will be to save: +# after 900 sec (15 min) if at least 1 key changed +# after 300 sec (5 min) if at least 10 keys changed +# after 60 sec if at least 10000 keys changed +# +# Note: you can disable saving completely by commenting out all "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" + +#save 900 1 +#save 300 10 +#save 60 10000 + +# OE: tune for a small embedded system with a limited # of keys. +save 120 1 +save 60 100 +save 30 1000 + +# By default Redis will stop accepting writes if RDB snapshots are enabled +# (at least one save point) and the latest background save failed. +# This will make the user aware (in a hard way) that data is not persisting +# on disk properly, otherwise chances are that no one will notice and some +# disaster will happen. +# +# If the background saving process will start working again Redis will +# automatically allow writes again. +# +# However if you have setup your proper monitoring of the Redis server +# and persistence, you may want to disable this feature so that Redis will +# continue to work as usual even if there are problems with disk, +# permissions, and so forth. +stop-writes-on-bgsave-error yes + +# Compress string objects using LZF when dump .rdb databases? +# For default that's set to 'yes' as it's almost always a win. +# If you want to save some CPU in the saving child set it to 'no' but +# the dataset will likely be bigger if you have compressible values or keys. +rdbcompression yes + +# Since version 5 of RDB a CRC64 checksum is placed at the end of the file. +# This makes the format more resistant to corruption but there is a performance +# hit to pay (around 10%) when saving and loading RDB files, so you can disable it +# for maximum performances. +# +# RDB files created with checksum disabled have a checksum of zero that will +# tell the loading code to skip the check. +rdbchecksum yes + +# The filename where to dump the DB +dbfilename dump.rdb + +# The working directory. +# +# The DB will be written inside this directory, with the filename specified +# above using the 'dbfilename' configuration directive. +# +# The Append Only File will also be created inside this directory. +# +# Note that you must specify a directory here, not a file name. +dir /var/lib/valkey/ + +################################# REPLICATION ################################# + +# Master-Slave replication. Use slaveof to make a Redis instance a copy of +# another Redis server. A few things to understand ASAP about Redis replication. +# +# 1) Redis replication is asynchronous, but you can configure a master to +# stop accepting writes if it appears to be not connected with at least +# a given number of slaves. +# 2) Redis slaves are able to perform a partial resynchronization with the +# master if the replication link is lost for a relatively small amount of +# time. You may want to configure the replication backlog size (see the next +# sections of this file) with a sensible value depending on your needs. +# 3) Replication is automatic and does not need user intervention. After a +# network partition slaves automatically try to reconnect to masters +# and resynchronize with them. +# +# slaveof <masterip> <masterport> + +# If the master is password protected (using the "requirepass" configuration +# directive below) it is possible to tell the slave to authenticate before +# starting the replication synchronization process, otherwise the master will +# refuse the slave request. +# +# masterauth <master-password> + +# When a slave loses its connection with the master, or when the replication +# is still in progress, the slave can act in two different ways: +# +# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will +# still reply to client requests, possibly with out of date data, or the +# data set may just be empty if this is the first synchronization. +# +# 2) if slave-serve-stale-data is set to 'no' the slave will reply with +# an error "SYNC with master in progress" to all the kind of commands +# but to INFO and SLAVEOF. +# +slave-serve-stale-data yes + +# You can configure a slave instance to accept writes or not. Writing against +# a slave instance may be useful to store some ephemeral data (because data +# written on a slave will be easily deleted after resync with the master) but +# may also cause problems if clients are writing to it because of a +# misconfiguration. +# +# Since Redis 2.6 by default slaves are read-only. +# +# Note: read only slaves are not designed to be exposed to untrusted clients +# on the internet. It's just a protection layer against misuse of the instance. +# Still a read only slave exports by default all the administrative commands +# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve +# security of read only slaves using 'rename-command' to shadow all the +# administrative / dangerous commands. +slave-read-only yes + +# Replication SYNC strategy: disk or socket. +# +# ------------------------------------------------------- +# WARNING: DISKLESS REPLICATION IS EXPERIMENTAL CURRENTLY +# ------------------------------------------------------- +# +# New slaves and reconnecting slaves that are not able to continue the replication +# process just receiving differences, need to do what is called a "full +# synchronization". An RDB file is transmitted from the master to the slaves. +# The transmission can happen in two different ways: +# +# 1) Disk-backed: The Redis master creates a new process that writes the RDB +# file on disk. Later the file is transferred by the parent +# process to the slaves incrementally. +# 2) Diskless: The Redis master creates a new process that directly writes the +# RDB file to slave sockets, without touching the disk at all. +# +# With disk-backed replication, while the RDB file is generated, more slaves +# can be queued and served with the RDB file as soon as the current child producing +# the RDB file finishes its work. With diskless replication instead once +# the transfer starts, new slaves arriving will be queued and a new transfer +# will start when the current one terminates. +# +# When diskless replication is used, the master waits a configurable amount of +# time (in seconds) before starting the transfer in the hope that multiple slaves +# will arrive and the transfer can be parallelized. +# +# With slow disks and fast (large bandwidth) networks, diskless replication +# works better. +repl-diskless-sync no + +# When diskless replication is enabled, it is possible to configure the delay +# the server waits in order to spawn the child that transfers the RDB via socket +# to the slaves. +# +# This is important since once the transfer starts, it is not possible to serve +# new slaves arriving, that will be queued for the next RDB transfer, so the server +# waits a delay in order to let more slaves arrive. +# +# The delay is specified in seconds, and by default is 5 seconds. To disable +# it entirely just set it to 0 seconds and the transfer will start ASAP. +repl-diskless-sync-delay 5 + +# Slaves send PINGs to server in a predefined interval. It's possible to change +# this interval with the repl_ping_slave_period option. The default value is 10 +# seconds. +# +# repl-ping-slave-period 10 + +# The following option sets the replication timeout for: +# +# 1) Bulk transfer I/O during SYNC, from the point of view of slave. +# 2) Master timeout from the point of view of slaves (data, pings). +# 3) Slave timeout from the point of view of masters (REPLCONF ACK pings). +# +# It is important to make sure that this value is greater than the value +# specified for repl-ping-slave-period otherwise a timeout will be detected +# every time there is low traffic between the master and the slave. +# +# repl-timeout 60 + +# Disable TCP_NODELAY on the slave socket after SYNC? +# +# If you select "yes" Redis will use a smaller number of TCP packets and +# less bandwidth to send data to slaves. But this can add a delay for +# the data to appear on the slave side, up to 40 milliseconds with +# Linux kernels using a default configuration. +# +# If you select "no" the delay for data to appear on the slave side will +# be reduced but more bandwidth will be used for replication. +# +# By default we optimize for low latency, but in very high traffic conditions +# or when the master and slaves are many hops away, turning this to "yes" may +# be a good idea. +repl-disable-tcp-nodelay no + +# Set the replication backlog size. The backlog is a buffer that accumulates +# slave data when slaves are disconnected for some time, so that when a slave +# wants to reconnect again, often a full resync is not needed, but a partial +# resync is enough, just passing the portion of data the slave missed while +# disconnected. +# +# The bigger the replication backlog, the longer the time the slave can be +# disconnected and later be able to perform a partial resynchronization. +# +# The backlog is only allocated once there is at least a slave connected. +# +# repl-backlog-size 1mb + +# After a master has no longer connected slaves for some time, the backlog +# will be freed. The following option configures the amount of seconds that +# need to elapse, starting from the time the last slave disconnected, for +# the backlog buffer to be freed. +# +# Note that slaves never free the backlog for timeout, since they may be +# promoted to masters later, and should be able to correctly "partially +# resynchronize" with the slaves: hence they should always accumulate backlog. +# +# A value of 0 means to never release the backlog. +# +# repl-backlog-ttl 3600 + +# The slave priority is an integer number published by Redis in the INFO output. +# It is used by Redis Sentinel in order to select a slave to promote into a +# master if the master is no longer working correctly. +# +# A slave with a low priority number is considered better for promotion, so +# for instance if there are three slaves with priority 10, 100, 25 Sentinel will +# pick the one with priority 10, that is the lowest. +# +# However a special priority of 0 marks the slave as not able to perform the +# role of master, so a slave with priority of 0 will never be selected by +# Redis Sentinel for promotion. +# +# By default the priority is 100. +slave-priority 100 + +# It is possible for a master to stop accepting writes if there are less than +# N slaves connected, having a lag less or equal than M seconds. +# +# The N slaves need to be in "online" state. +# +# The lag in seconds, that must be <= the specified value, is calculated from +# the last ping received from the slave, that is usually sent every second. +# +# This option does not GUARANTEE that N replicas will accept the write, but +# will limit the window of exposure for lost writes in case not enough slaves +# are available, to the specified number of seconds. +# +# For example to require at least 3 slaves with a lag <= 10 seconds use: +# +# min-slaves-to-write 3 +# min-slaves-max-lag 10 +# +# Setting one or the other to 0 disables the feature. +# +# By default min-slaves-to-write is set to 0 (feature disabled) and +# min-slaves-max-lag is set to 10. + +# A Redis master is able to list the address and port of the attached +# slaves in different ways. For example the "INFO replication" section +# offers this information, which is used, among other tools, by +# Redis Sentinel in order to discover slave instances. +# Another place where this info is available is in the output of the +# "ROLE" command of a master. +# +# The listed IP and address normally reported by a slave is obtained +# in the following way: +# +# IP: The address is auto detected by checking the peer address +# of the socket used by the slave to connect with the master. +# +# Port: The port is communicated by the slave during the replication +# handshake, and is normally the port that the slave is using to +# list for connections. +# +# However when port forwarding or Network Address Translation (NAT) is +# used, the slave may be actually reachable via different IP and port +# pairs. The following two options can be used by a slave in order to +# report to its master a specific set of IP and port, so that both INFO +# and ROLE will report those values. +# +# There is no need to use both the options if you need to override just +# the port or the IP address. +# +# slave-announce-ip 5.5.5.5 +# slave-announce-port 1234 + +################################## SECURITY ################################### + +# Require clients to issue AUTH <PASSWORD> before processing any other +# commands. This might be useful in environments in which you do not trust +# others with access to the host running valkey-server. +# +# This should stay commented out for backward compatibility and because most +# people do not need auth (e.g. they run their own servers). +# +# Warning: since Redis is pretty fast an outside user can try up to +# 150k passwords per second against a good box. This means that you should +# use a very strong password otherwise it will be very easy to break. +# +# requirepass foobared + +# Command renaming. +# +# It is possible to change the name of dangerous commands in a shared +# environment. For instance the CONFIG command may be renamed into something +# hard to guess so that it will still be available for internal-use tools +# but not available for general clients. +# +# Example: +# +# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 +# +# It is also possible to completely kill a command by renaming it into +# an empty string: +# +# rename-command CONFIG "" +# +# Please note that changing the name of commands that are logged into the +# AOF file or transmitted to slaves may cause problems. + +################################### CLIENTS #################################### + +# Set the max number of connected clients at the same time. By default +# this limit is set to 10000 clients, however if the Redis server is not +# able to configure the process file limit to allow for the specified limit +# the max number of allowed clients is set to the current file limit +# minus 32 (as Redis reserves a few file descriptors for internal uses). +# +# Once the limit is reached Redis will close all the new connections sending +# an error 'max number of clients reached'. +# +# maxclients 10000 + +############################## MEMORY MANAGEMENT ################################ + +# Set a memory usage limit to the specified amount of bytes. +# When the memory limit is reached Redis will try to remove keys +# according to the eviction policy selected (see maxmemory-policy). +# +# If Redis can't remove keys according to the policy, or if the policy is +# set to 'noeviction', Redis will start to reply with errors to commands +# that would use more memory, like SET, LPUSH, and so on, and will continue +# to reply to read-only commands like GET. +# +# This option is usually useful when using Redis as an LRU or LFU cache, or to +# set a hard memory limit for an instance (using the 'noeviction' policy). +# +# WARNING: If you have slaves attached to an instance with maxmemory on, +# the size of the output buffers needed to feed the slaves are subtracted +# from the used memory count, so that network problems / resyncs will +# not trigger a loop where keys are evicted, and in turn the output +# buffer of slaves is full with DELs of keys evicted triggering the deletion +# of more keys, and so forth until the database is completely emptied. +# +# In short... if you have slaves attached it is suggested that you set a lower +# limit for maxmemory so that there is some free RAM on the system for slave +# output buffers (but this is not needed if the policy is 'noeviction'). +# +# maxmemory <bytes> + +# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory +# is reached. You can select among five behaviors: +# +# volatile-lru -> Evict using approximated LRU among the keys with an expire set. +# allkeys-lru -> Evict any key using approximated LRU. +# volatile-lfu -> Evict using approximated LFU among the keys with an expire set. +# allkeys-lfu -> Evict any key using approximated LFU. +# volatile-random -> Remove a random key among the ones with an expire set. +# allkeys-random -> Remove a random key, any key. +# volatile-ttl -> Remove the key with the nearest expire time (minor TTL) +# noeviction -> Don't evict anything, just return an error on write operations. +# +# LRU means Least Recently Used +# LFU means Least Frequently Used +# +# Both LRU, LFU and volatile-ttl are implemented using approximated +# randomized algorithms. +# +# Note: with any of the above policies, Redis will return an error on write +# operations, when there are no suitable keys for eviction. +# +# At the date of writing these commands are: set setnx setex append +# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd +# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby +# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby +# getset mset msetnx exec sort +# +# The default is: +# +# maxmemory-policy noeviction + +# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated +# algorithms (in order to save memory), so you can tune it for speed or +# accuracy. For default Redis will check five keys and pick the one that was +# used less recently, you can change the sample size using the following +# configuration directive. +# +# The default of 5 produces good enough results. 10 Approximates very closely +# true LRU but costs more CPU. 3 is faster but not very accurate. +# +# maxmemory-samples 5 + +############################# LAZY FREEING #################################### + +# Redis has two primitives to delete keys. One is called DEL and is a blocking +# deletion of the object. It means that the server stops processing new commands +# in order to reclaim all the memory associated with an object in a synchronous +# way. If the key deleted is associated with a small object, the time needed +# in order to execute the DEL command is very small and comparable to most other +# O(1) or O(log_N) commands in Redis. However if the key is associated with an +# aggregated value containing millions of elements, the server can block for +# a long time (even seconds) in order to complete the operation. +# +# For the above reasons Redis also offers non blocking deletion primitives +# such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and +# FLUSHDB commands, in order to reclaim memory in background. Those commands +# are executed in constant time. Another thread will incrementally free the +# object in the background as fast as possible. +# +# DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled. +# It's up to the design of the application to understand when it is a good +# idea to use one or the other. However the Redis server sometimes has to +# delete keys or flush the whole database as a side effect of other operations. +# Specifically Redis deletes objects independently of a user call in the +# following scenarios: +# +# 1) On eviction, because of the maxmemory and maxmemory policy configurations, +# in order to make room for new data, without going over the specified +# memory limit. +# 2) Because of expire: when a key with an associated time to live (see the +# EXPIRE command) must be deleted from memory. +# 3) Because of a side effect of a command that stores data on a key that may +# already exist. For example the RENAME command may delete the old key +# content when it is replaced with another one. Similarly SUNIONSTORE +# or SORT with STORE option may delete existing keys. The SET command +# itself removes any old content of the specified key in order to replace +# it with the specified string. +# 4) During replication, when a slave performs a full resynchronization with +# its master, the content of the whole database is removed in order to +# load the RDB file just transfered. +# +# In all the above cases the default is to delete objects in a blocking way, +# like if DEL was called. However you can configure each case specifically +# in order to instead release memory in a non-blocking way like if UNLINK +# was called, using the following configuration directives: + +lazyfree-lazy-eviction no +lazyfree-lazy-expire no +lazyfree-lazy-server-del no +slave-lazy-flush no + +############################## APPEND ONLY MODE ############################### + +# By default Redis asynchronously dumps the dataset on disk. This mode is +# good enough in many applications, but an issue with the Redis process or +# a power outage may result into a few minutes of writes lost (depending on +# the configured save points). +# +# The Append Only File is an alternative persistence mode that provides +# much better durability. For instance using the default data fsync policy +# (see later in the config file) Redis can lose just one second of writes in a +# dramatic event like a server power outage, or a single write if something +# wrong with the Redis process itself happens, but the operating system is +# still running correctly. +# +# AOF and RDB persistence can be enabled at the same time without problems. +# If the AOF is enabled on startup Redis will load the AOF, that is the file +# with the better durability guarantees. +# +# Please check http://valkey.io/topics/persistence for more information. + +# OE: changed default to enable this +appendonly yes + +# The name of the append only file (default: "appendonly.aof") + +appendfilename "appendonly.aof" + +# The fsync() call tells the Operating System to actually write data on disk +# instead of waiting for more data in the output buffer. Some OS will really flush +# data on disk, some other OS will just try to do it ASAP. +# +# Redis supports three different modes: +# +# no: don't fsync, just let the OS flush the data when it wants. Faster. +# always: fsync after every write to the append only log. Slow, Safest. +# everysec: fsync only one time every second. Compromise. +# +# The default is "everysec", as that's usually the right compromise between +# speed and data safety. It's up to you to understand if you can relax this to +# "no" that will let the operating system flush the output buffer when +# it wants, for better performances (but if you can live with the idea of +# some data loss consider the default persistence mode that's snapshotting), +# or on the contrary, use "always" that's very slow but a bit safer than +# everysec. +# +# More details please check the following article: +# http://antirez.com/post/valkey-persistence-demystified.html +# +# If unsure, use "everysec". + +# appendfsync always +appendfsync everysec +# appendfsync no + +# When the AOF fsync policy is set to always or everysec, and a background +# saving process (a background save or AOF log background rewriting) is +# performing a lot of I/O against the disk, in some Linux configurations +# Redis may block too long on the fsync() call. Note that there is no fix for +# this currently, as even performing fsync in a different thread will block +# our synchronous write(2) call. +# +# In order to mitigate this problem it's possible to use the following option +# that will prevent fsync() from being called in the main process while a +# BGSAVE or BGREWRITEAOF is in progress. +# +# This means that while another child is saving, the durability of Redis is +# the same as "appendfsync none". In practical terms, this means that it is +# possible to lose up to 30 seconds of log in the worst scenario (with the +# default Linux settings). +# +# If you have latency problems turn this to "yes". Otherwise leave it as +# "no" that is the safest pick from the point of view of durability. + +no-appendfsync-on-rewrite no + +# Automatic rewrite of the append only file. +# Redis is able to automatically rewrite the log file implicitly calling +# BGREWRITEAOF when the AOF log size grows by the specified percentage. +# +# This is how it works: Redis remembers the size of the AOF file after the +# latest rewrite (if no rewrite has happened since the restart, the size of +# the AOF at startup is used). +# +# This base size is compared to the current size. If the current size is +# bigger than the specified percentage, the rewrite is triggered. Also +# you need to specify a minimal size for the AOF file to be rewritten, this +# is useful to avoid rewriting the AOF file even if the percentage increase +# is reached but it is still pretty small. +# +# Specify a percentage of zero in order to disable the automatic AOF +# rewrite feature. + +auto-aof-rewrite-percentage 100 +auto-aof-rewrite-min-size 64mb + +# An AOF file may be found to be truncated at the end during the Redis +# startup process, when the AOF data gets loaded back into memory. +# This may happen when the system where Redis is running +# crashes, especially when an ext4 filesystem is mounted without the +# data=ordered option (however this can't happen when Redis itself +# crashes or aborts but the operating system still works correctly). +# +# Redis can either exit with an error when this happens, or load as much +# data as possible (the default now) and start if the AOF file is found +# to be truncated at the end. The following option controls this behavior. +# +# If aof-load-truncated is set to yes, a truncated AOF file is loaded and +# the Redis server starts emitting a log to inform the user of the event. +# Otherwise if the option is set to no, the server aborts with an error +# and refuses to start. When the option is set to no, the user requires +# to fix the AOF file using the "valkey-check-aof" utility before to restart +# the server. +# +# Note that if the AOF file will be found to be corrupted in the middle +# the server will still exit with an error. This option only applies when +# Redis will try to read more data from the AOF file but not enough bytes +# will be found. +aof-load-truncated yes + +# When rewriting the AOF file, Redis is able to use an RDB preamble in the +# AOF file for faster rewrites and recoveries. When this option is turned +# on the rewritten AOF file is composed of two different stanzas: +# +# [RDB file][AOF tail] +# +# When loading Redis recognizes that the AOF file starts with the "REDIS" +# string and loads the prefixed RDB file, and continues loading the AOF +# tail. +# +# This is currently turned off by default in order to avoid the surprise +# of a format change, but will at some point be used as the default. +aof-use-rdb-preamble no + +################################ LUA SCRIPTING ############################### + +# Max execution time of a Lua script in milliseconds. +# +# If the maximum execution time is reached Redis will log that a script is +# still in execution after the maximum allowed time and will start to +# reply to queries with an error. +# +# When a long running script exceeds the maximum execution time only the +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be +# used to stop a script that did not yet called write commands. The second +# is the only way to shut down the server in the case a write command was +# already issued by the script but the user doesn't want to wait for the natural +# termination of the script. +# +# Set it to 0 or a negative value for unlimited execution without warnings. +lua-time-limit 5000 + +################################ REDIS CLUSTER ############################### +# +# ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +# WARNING EXPERIMENTAL: Redis Cluster is considered to be stable code, however +# in order to mark it as "mature" we need to wait for a non trivial percentage +# of users to deploy it in production. +# ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +# +# Normal Redis instances can't be part of a Redis Cluster; only nodes that are +# started as cluster nodes can. In order to start a Redis instance as a +# cluster node enable the cluster support uncommenting the following: +# +# cluster-enabled yes + +# Every cluster node has a cluster configuration file. This file is not +# intended to be edited by hand. It is created and updated by Redis nodes. +# Every Redis Cluster node requires a different cluster configuration file. +# Make sure that instances running in the same system do not have +# overlapping cluster configuration file names. +# +# cluster-config-file nodes-6379.conf + +# Cluster node timeout is the amount of milliseconds a node must be unreachable +# for it to be considered in failure state. +# Most other internal time limits are multiple of the node timeout. +# +# cluster-node-timeout 15000 + +# A slave of a failing master will avoid to start a failover if its data +# looks too old. +# +# There is no simple way for a slave to actually have an exact measure of +# its "data age", so the following two checks are performed: +# +# 1) If there are multiple slaves able to failover, they exchange messages +# in order to try to give an advantage to the slave with the best +# replication offset (more data from the master processed). +# Slaves will try to get their rank by offset, and apply to the start +# of the failover a delay proportional to their rank. +# +# 2) Every single slave computes the time of the last interaction with +# its master. This can be the last ping or command received (if the master +# is still in the "connected" state), or the time that elapsed since the +# disconnection with the master (if the replication link is currently down). +# If the last interaction is too old, the slave will not try to failover +# at all. +# +# The point "2" can be tuned by user. Specifically a slave will not perform +# the failover if, since the last interaction with the master, the time +# elapsed is greater than: +# +# (node-timeout * slave-validity-factor) + repl-ping-slave-period +# +# So for example if node-timeout is 30 seconds, and the slave-validity-factor +# is 10, and assuming a default repl-ping-slave-period of 10 seconds, the +# slave will not try to failover if it was not able to talk with the master +# for longer than 310 seconds. +# +# A large slave-validity-factor may allow slaves with too old data to failover +# a master, while a too small value may prevent the cluster from being able to +# elect a slave at all. +# +# For maximum availability, it is possible to set the slave-validity-factor +# to a value of 0, which means, that slaves will always try to failover the +# master regardless of the last time they interacted with the master. +# (However they'll always try to apply a delay proportional to their +# offset rank). +# +# Zero is the only value able to guarantee that when all the partitions heal +# the cluster will always be able to continue. +# +# cluster-slave-validity-factor 10 + +# Cluster slaves are able to migrate to orphaned masters, that are masters +# that are left without working slaves. This improves the cluster ability +# to resist to failures as otherwise an orphaned master can't be failed over +# in case of failure if it has no working slaves. +# +# Slaves migrate to orphaned masters only if there are still at least a +# given number of other working slaves for their old master. This number +# is the "migration barrier". A migration barrier of 1 means that a slave +# will migrate only if there is at least 1 other working slave for its master +# and so forth. It usually reflects the number of slaves you want for every +# master in your cluster. +# +# Default is 1 (slaves migrate only if their masters remain with at least +# one slave). To disable migration just set it to a very large value. +# A value of 0 can be set but is useful only for debugging and dangerous +# in production. +# +# cluster-migration-barrier 1 + +# By default Redis Cluster nodes stop accepting queries if they detect there +# is at least an hash slot uncovered (no available node is serving it). +# This way if the cluster is partially down (for example a range of hash slots +# are no longer covered) all the cluster becomes, eventually, unavailable. +# It automatically returns available as soon as all the slots are covered again. +# +# However sometimes you want the subset of the cluster which is working, +# to continue to accept queries for the part of the key space that is still +# covered. In order to do so, just set the cluster-require-full-coverage +# option to no. +# +# cluster-require-full-coverage yes + +# In order to setup your cluster make sure to read the documentation +# available at http://valkey.io web site. + +########################## CLUSTER DOCKER/NAT support ######################## + +# In certain deployments, Redis Cluster nodes address discovery fails, because +# addresses are NAT-ted or because ports are forwarded (the typical case is +# Docker and other containers). +# +# In order to make Redis Cluster working in such environments, a static +# configuration where each node knows its public address is needed. The +# following two options are used for this scope, and are: +# +# * cluster-announce-ip +# * cluster-announce-port +# * cluster-announce-bus-port +# +# Each instruct the node about its address, client port, and cluster message +# bus port. The information is then published in the header of the bus packets +# so that other nodes will be able to correctly map the address of the node +# publishing the information. +# +# If the above options are not used, the normal Redis Cluster auto-detection +# will be used instead. +# +# Note that when remapped, the bus port may not be at the fixed offset of +# clients port + 10000, so you can specify any port and bus-port depending +# on how they get remapped. If the bus-port is not set, a fixed offset of +# 10000 will be used as usually. +# +# Example: +# +# cluster-announce-ip 10.1.1.5 +# cluster-announce-port 6379 +# cluster-announce-bus-port 6380 + +################################## SLOW LOG ################################### + +# The Redis Slow Log is a system to log queries that exceeded a specified +# execution time. The execution time does not include the I/O operations +# like talking with the client, sending the reply and so forth, +# but just the time needed to actually execute the command (this is the only +# stage of command execution where the thread is blocked and can not serve +# other requests in the meantime). +# +# You can configure the slow log with two parameters: one tells Redis +# what is the execution time, in microseconds, to exceed in order for the +# command to get logged, and the other parameter is the length of the +# slow log. When a new command is logged the oldest one is removed from the +# queue of logged commands. + +# The following time is expressed in microseconds, so 1000000 is equivalent +# to one second. Note that a negative number disables the slow log, while +# a value of zero forces the logging of every command. +slowlog-log-slower-than 10000 + +# There is no limit to this length. Just be aware that it will consume memory. +# You can reclaim memory used by the slow log with SLOWLOG RESET. +slowlog-max-len 128 + +################################ LATENCY MONITOR ############################## + +# The Redis latency monitoring subsystem samples different operations +# at runtime in order to collect data related to possible sources of +# latency of a Redis instance. +# +# Via the LATENCY command this information is available to the user that can +# print graphs and obtain reports. +# +# The system only logs operations that were performed in a time equal or +# greater than the amount of milliseconds specified via the +# latency-monitor-threshold configuration directive. When its value is set +# to zero, the latency monitor is turned off. +# +# By default latency monitoring is disabled since it is mostly not needed +# if you don't have latency issues, and collecting data has a performance +# impact, that while very small, can be measured under big load. Latency +# monitoring can easily be enabled at runtime using the command +# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed. +latency-monitor-threshold 0 + +############################# EVENT NOTIFICATION ############################## + +# Redis can notify Pub/Sub clients about events happening in the key space. +# This feature is documented at http://valkey.io/topics/notifications +# +# For instance if keyspace events notification is enabled, and a client +# performs a DEL operation on key "foo" stored in the Database 0, two +# messages will be published via Pub/Sub: +# +# PUBLISH __keyspace@0__:foo del +# PUBLISH __keyevent@0__:del foo +# +# It is possible to select the events that Redis will notify among a set +# of classes. Every class is identified by a single character: +# +# K Keyspace events, published with __keyspace@<db>__ prefix. +# E Keyevent events, published with __keyevent@<db>__ prefix. +# g Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ... +# $ String commands +# l List commands +# s Set commands +# h Hash commands +# z Sorted set commands +# x Expired events (events generated every time a key expires) +# e Evicted events (events generated when a key is evicted for maxmemory) +# A Alias for g$lshzxe, so that the "AKE" string means all the events. +# +# The "notify-keyspace-events" takes as argument a string that is composed +# of zero or multiple characters. The empty string means that notifications +# are disabled. +# +# Example: to enable list and generic events, from the point of view of the +# event name, use: +# +# notify-keyspace-events Elg +# +# Example 2: to get the stream of the expired keys subscribing to channel +# name __keyevent@0__:expired use: +# +# notify-keyspace-events Ex +# +# By default all notifications are disabled because most users don't need +# this feature and the feature has some overhead. Note that if you don't +# specify at least one of K or E, no events will be delivered. +notify-keyspace-events "" + +############################### ADVANCED CONFIG ############################### + +# Hashes are encoded using a memory efficient data structure when they have a +# small number of entries, and the biggest entry does not exceed a given +# threshold. These thresholds can be configured using the following directives. +hash-max-ziplist-entries 512 +hash-max-ziplist-value 64 + +# Lists are also encoded in a special way to save a lot of space. +# The number of entries allowed per internal list node can be specified +# as a fixed maximum size or a maximum number of elements. +# For a fixed maximum size, use -5 through -1, meaning: +# -5: max size: 64 Kb <-- not recommended for normal workloads +# -4: max size: 32 Kb <-- not recommended +# -3: max size: 16 Kb <-- probably not recommended +# -2: max size: 8 Kb <-- good +# -1: max size: 4 Kb <-- good +# Positive numbers mean store up to _exactly_ that number of elements +# per list node. +# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size), +# but if your use case is unique, adjust the settings as necessary. +list-max-ziplist-size -2 + +# Lists may also be compressed. +# Compress depth is the number of quicklist ziplist nodes from *each* side of +# the list to *exclude* from compression. The head and tail of the list +# are always uncompressed for fast push/pop operations. Settings are: +# 0: disable all list compression +# 1: depth 1 means "don't start compressing until after 1 node into the list, +# going from either the head or tail" +# So: [head]->node->node->...->node->[tail] +# [head], [tail] will always be uncompressed; inner nodes will compress. +# 2: [head]->[next]->node->node->...->node->[prev]->[tail] +# 2 here means: don't compress head or head->next or tail->prev or tail, +# but compress all nodes between them. +# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail] +# etc. +list-compress-depth 0 + +# Sets have a special encoding in just one case: when a set is composed +# of just strings that happen to be integers in radix 10 in the range +# of 64 bit signed integers. +# The following configuration setting sets the limit in the size of the +# set in order to use this special memory saving encoding. +set-max-intset-entries 512 + +# Similarly to hashes and lists, sorted sets are also specially encoded in +# order to save a lot of space. This encoding is only used when the length and +# elements of a sorted set are below the following limits: +zset-max-ziplist-entries 128 +zset-max-ziplist-value 64 + +# HyperLogLog sparse representation bytes limit. The limit includes the +# 16 bytes header. When an HyperLogLog using the sparse representation crosses +# this limit, it is converted into the dense representation. +# +# A value greater than 16000 is totally useless, since at that point the +# dense representation is more memory efficient. +# +# The suggested value is ~ 3000 in order to have the benefits of +# the space efficient encoding without slowing down too much PFADD, +# which is O(N) with the sparse encoding. The value can be raised to +# ~ 10000 when CPU is not a concern, but space is, and the data set is +# composed of many HyperLogLogs with cardinality in the 0 - 15000 range. +hll-sparse-max-bytes 3000 + +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in +# order to help rehashing the main Redis hash table (the one mapping top-level +# keys to values). The hash table implementation Redis uses (see dict.c) +# performs a lazy rehashing: the more operation you run into a hash table +# that is rehashing, the more rehashing "steps" are performed, so if the +# server is idle the rehashing is never complete and some more memory is used +# by the hash table. +# +# The default is to use this millisecond 10 times every second in order to +# actively rehash the main dictionaries, freeing memory when possible. +# +# If unsure: +# use "activerehashing no" if you have hard latency requirements and it is +# not a good thing in your environment that Redis can reply from time to time +# to queries with 2 milliseconds delay. +# +# use "activerehashing yes" if you don't have such hard requirements but +# want to free memory asap when possible. +activerehashing yes + +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients including MONITOR clients +# slave -> slave clients +# pubsub -> clients subscribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds> +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled by setting them to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + +# Client query buffers accumulate new commands. They are limited to a fixed +# amount by default in order to avoid that a protocol desynchronization (for +# instance due to a bug in the client) will lead to unbound memory usage in +# the query buffer. However you can configure it here if you have very special +# needs, such us huge multi/exec requests or alike. +# +# client-query-buffer-limit 1gb + +# In the Redis protocol, bulk requests, that are, elements representing single +# strings, are normally limited ot 512 mb. However you can change this limit +# here. +# +# proto-max-bulk-len 512mb + +# Redis calls an internal function to perform many background tasks, like +# closing connections of clients in timeout, purging expired keys that are +# never requested, and so forth. +# +# Not all tasks are performed with the same frequency, but Redis checks for +# tasks to perform according to the specified "hz" value. +# +# By default "hz" is set to 10. Raising the value will use more CPU when +# Redis is idle, but at the same time will make Redis more responsive when +# there are many keys expiring at the same time, and timeouts may be +# handled with more precision. +# +# The range is between 1 and 500, however a value over 100 is usually not +# a good idea. Most users should use the default of 10 and raise this up to +# 100 only in environments where very low latency is required. +hz 10 + +# When a child rewrites the AOF file, if the following option is enabled +# the file will be fsync-ed every 32 MB of data generated. This is useful +# in order to commit the file to the disk more incrementally and avoid +# big latency spikes. +aof-rewrite-incremental-fsync yes + +# Redis LFU eviction (see maxmemory setting) can be tuned. However it is a good +# idea to start with the default settings and only change them after investigating +# how to improve the performances and how the keys LFU change over time, which +# is possible to inspect via the OBJECT FREQ command. +# +# There are two tunable parameters in the Redis LFU implementation: the +# counter logarithm factor and the counter decay time. It is important to +# understand what the two parameters mean before changing them. +# +# The LFU counter is just 8 bits per key, it's maximum value is 255, so Redis +# uses a probabilistic increment with logarithmic behavior. Given the value +# of the old counter, when a key is accessed, the counter is incremented in +# this way: +# +# 1. A random number R between 0 and 1 is extracted. +# 2. A probability P is calculated as 1/(old_value*lfu_log_factor+1). +# 3. The counter is incremented only if R < P. +# +# The default lfu-log-factor is 10. This is a table of how the frequency +# counter changes with a different number of accesses with different +# logarithmic factors: +# +# +--------+------------+------------+------------+------------+------------+ +# | factor | 100 hits | 1000 hits | 100K hits | 1M hits | 10M hits | +# +--------+------------+------------+------------+------------+------------+ +# | 0 | 104 | 255 | 255 | 255 | 255 | +# +--------+------------+------------+------------+------------+------------+ +# | 1 | 18 | 49 | 255 | 255 | 255 | +# +--------+------------+------------+------------+------------+------------+ +# | 10 | 10 | 18 | 142 | 255 | 255 | +# +--------+------------+------------+------------+------------+------------+ +# | 100 | 8 | 11 | 49 | 143 | 255 | +# +--------+------------+------------+------------+------------+------------+ +# +# NOTE: The above table was obtained by running the following commands: +# +# valkey-benchmark -n 1000000 incr foo +# valkey-cli object freq foo +# +# NOTE 2: The counter initial value is 5 in order to give new objects a chance +# to accumulate hits. +# +# The counter decay time is the time, in minutes, that must elapse in order +# for the key counter to be divided by two (or decremented if it has a value +# less <= 10). +# +# The default value for the lfu-decay-time is 1. A Special value of 0 means to +# decay the counter every time it happens to be scanned. +# +# lfu-log-factor 10 +# lfu-decay-time 1 + +########################### ACTIVE DEFRAGMENTATION ####################### +# +# WARNING THIS FEATURE IS EXPERIMENTAL. However it was stress tested +# even in production and manually tested by multiple engineers for some +# time. +# +# What is active defragmentation? +# ------------------------------- +# +# Active (online) defragmentation allows a Redis server to compact the +# spaces left between small allocations and deallocations of data in memory, +# thus allowing to reclaim back memory. +# +# Fragmentation is a natural process that happens with every allocator (but +# less so with Jemalloc, fortunately) and certain workloads. Normally a server +# restart is needed in order to lower the fragmentation, or at least to flush +# away all the data and create it again. However thanks to this feature +# implemented by Oran Agra for Redis 4.0 this process can happen at runtime +# in an "hot" way, while the server is running. +# +# Basically when the fragmentation is over a certain level (see the +# configuration options below) Redis will start to create new copies of the +# values in contiguous memory regions by exploiting certain specific Jemalloc +# features (in order to understand if an allocation is causing fragmentation +# and to allocate it in a better place), and at the same time, will release the +# old copies of the data. This process, repeated incrementally for all the keys +# will cause the fragmentation to drop back to normal values. +# +# Important things to understand: +# +# 1. This feature is disabled by default, and only works if you compiled Redis +# to use the copy of Jemalloc we ship with the source code of Redis. +# This is the default with Linux builds. +# +# 2. You never need to enable this feature if you don't have fragmentation +# issues. +# +# 3. Once you experience fragmentation, you can enable this feature when +# needed with the command "CONFIG SET activedefrag yes". +# +# The configuration parameters are able to fine tune the behavior of the +# defragmentation process. If you are not sure about what they mean it is +# a good idea to leave the defaults untouched. + +# Enabled active defragmentation +# activedefrag yes + +# Minimum amount of fragmentation waste to start active defrag +# active-defrag-ignore-bytes 100mb + +# Minimum percentage of fragmentation to start active defrag +# active-defrag-threshold-lower 10 + +# Maximum percentage of fragmentation at which we use maximum effort +# active-defrag-threshold-upper 100 + +# Minimal effort for defrag in CPU percentage +# active-defrag-cycle-min 25 + +# Maximal effort for defrag in CPU percentage +# active-defrag-cycle-max 75 diff --git a/meta-oe/recipes-extended/valkey/valkey/valkey.service b/meta-oe/recipes-extended/valkey/valkey/valkey.service new file mode 100644 index 000000000..5c6aa5b17 --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey/valkey.service @@ -0,0 +1,16 @@ +[Unit] +Description=Valkey: an open source, in-memory data store +After=network.target + +[Service] +User=valkey +Group=valkey +ExecStart=/usr/bin/valkey-server /etc/valkey/valkey.conf +ExecStop=/usr/bin/valkey-cli shutdown +Restart=always +LimitNOFILE=10032 +StateDirectory=valkey + +[Install] +WantedBy=multi-user.target + diff --git a/meta-oe/recipes-extended/valkey/valkey_8.0.0.bb b/meta-oe/recipes-extended/valkey/valkey_8.0.0.bb new file mode 100644 index 000000000..373ebd469 --- /dev/null +++ b/meta-oe/recipes-extended/valkey/valkey_8.0.0.bb @@ -0,0 +1,74 @@ +SUMMARY = "Valkey key-value store" +DESCRIPTION = "A flexible distributed key-value datastore that supports both caching and beyond caching workloads." +HOMEPAGE = "http://valkey.io" +SECTION = "libs" +LICENSE = "BSD-3-Clause" +LIC_FILES_CHKSUM = "file://COPYING;md5=f924153a31f3091d2c9c500317d53425" +DEPENDS = "readline lua ncurses" + +SRC_URI = " \ + git://github.com/valkey-io/valkey.git;branch=8.0;protocol=https \ + file://valkey.conf \ + file://init-valkey-server \ + file://valkey.service \ + file://hiredis-use-default-CC-if-it-is-set.patch \ + file://lua-update-Makefile-to-use-environment-build-setting.patch \ + file://oe-use-libc-malloc.patch \ + file://0001-src-Do-not-reset-FINAL_LIBS.patch \ + file://GNU_SOURCE-7.patch \ +" +SRCREV = "2b5c7a0dbd61fd4281ef6166b7d119ba7fe7368c" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig update-rc.d systemd useradd + +FINAL_LIBS:x86:toolchain-clang = "-latomic" +FINAL_LIBS:riscv32:toolchain-clang = "-latomic" +FINAL_LIBS:mips = "-latomic" +FINAL_LIBS:arm = "-latomic" +FINAL_LIBS:powerpc = "-latomic" + +export FINAL_LIBS + +USERADD_PACKAGES = "${PN}" +USERADD_PARAM:${PN} = "--system --home-dir /var/lib/valkey -g valkey --shell /bin/false valkey" +GROUPADD_PARAM:${PN} = "--system valkey" + +PACKAGECONFIG = "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" +PACKAGECONFIG[systemd] = "USE_SYSTEMD=yes,USE_SYSTEMD=no,systemd" + +EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}" + +do_compile:prepend() { + (cd deps && oe_runmake hiredis lua linenoise) +} + +do_install() { + export PREFIX=${D}/${prefix} + oe_runmake install + install -d ${D}/${sysconfdir}/valkey + install -m 0644 ${UNPACKDIR}/valkey.conf ${D}/${sysconfdir}/valkey/valkey.conf + install -d ${D}/${sysconfdir}/init.d + install -m 0755 ${UNPACKDIR}/init-valkey-server ${D}/${sysconfdir}/init.d/valkey-server + install -d ${D}/var/lib/valkey/ + chown valkey.valkey ${D}/var/lib/valkey/ + + install -d ${D}${systemd_system_unitdir} + install -m 0644 ${UNPACKDIR}/valkey.service ${D}${systemd_system_unitdir} + sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${systemd_system_unitdir}/valkey.service + + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + sed -i 's!daemonize yes!# daemonize yes!' ${D}/${sysconfdir}/valkey/valkey.conf + sed -i 's!supervised no!supervised systemd!' ${D}/${sysconfdir}/valkey/valkey.conf + fi +} + +CONFFILES:${PN} = "${sysconfdir}/valkey/valkey.conf" + +INITSCRIPT_NAME = "valkey-server" +INITSCRIPT_PARAMS = "defaults 87" + +SYSTEMD_SERVICE:${PN} = "valkey.service" + +CVE_STATUS[CVE-2022-3734] = "not-applicable-platform: CVE only applies for Windows." diff --git a/meta-python/recipes-devtools/python/python3-pikepdf/run-ptest b/meta-python/recipes-devtools/python/python3-pikepdf/run-ptest new file mode 100644 index 000000000..b63c4de0d --- /dev/null +++ b/meta-python/recipes-devtools/python/python3-pikepdf/run-ptest @@ -0,0 +1,3 @@ +#!/bin/sh + +pytest -o log_cli=true -o log_cli_level=INFO | sed -e 's/\[...%\]//g'| sed -e 's/PASSED/PASS/g'| sed -e 's/FAILED/FAIL/g'|sed -e 's/SKIPPED/SKIP/g'| awk '{if ($NF=="PASS" || $NF=="FAIL" || $NF=="SKIP" || $NF=="XFAIL" || $NF=="XPASS"){printf "%s: %s\n", $NF, $0}else{print}}'| awk '{if ($NF=="PASS" || $NF=="FAIL" || $NF=="SKIP" || $NF=="XFAIL" || $NF=="XPASS") {$NF="";print $0}else{print}}' diff --git a/meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb b/meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb new file mode 100644 index 000000000..076566f14 --- /dev/null +++ b/meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb @@ -0,0 +1,45 @@ +SUMMARY = "Read and write PDFs with Python, powered by qpdf" +HOMEPAGE = "https://pypi.org/project/pikepdf" +LICENSE = "MPL-2.0" +LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=9741c346eef56131163e13b9db1241b3" + +SRC_URI[sha256sum] = "777e611e28cfa208ab61685df493fd695e9d180cf34cd97792e1a69decd8c533" + +inherit pypi pkgconfig python_setuptools_build_meta pypi python3-dir ptest + +PYPI_PACKAGE = "pikepdf" +#S = "${WORKDIR}/${PYPI_PACKAGE}-${PV}" + +SRC_URI += " \ + file://run-ptest \ +" + +RDEPENDS:${PN}-ptest += " \ + ${PYTHON_PN}-pytest \ +" + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + cp -rf ${S}/tests/* ${D}${PTEST_PATH}/tests/ +} + +DEPENDS += "python3-pybind11-native python3-wheel-native python3-pip-native python3-setuptools-scm-native qpdf" +RDEPENDS:${PN} += "python3 python3-pillow python3-lxml qpdf python3-packaging" + +do_install:append() { + cp -r ${WORKDIR}/${PYPI_PACKAGE}-${PV}/src/pikepdf/* ${D}${libdir}/${PYTHON_DIR}/site-packages/pikepdf/ + + # Workaround for "UNKNOWN-0.0.0.dist-info" + mv ${D}${libdir}/${PYTHON_DIR}/site-packages/UNKNOWN-0.0.0.dist-info ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info + # sed -i 's/0.0.0/${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/METADATA + sed -i 's/UNKNOWN-0.0.0/${PYPI_PACKAGE}-${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/METADATA + # sed -i 's/0.0.0/${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/RECORD + sed -i 's/UNKNOWN-0.0.0/${PYPI_PACKAGE}-${PV}/g' ${D}${libdir}/${PYTHON_DIR}/site-packages/${PYPI_PACKAGE}-${PV}.dist-info/RECORD +} + +FILES:${PN} += " \ + ${libdir}/${PYTHON_DIR}/site-packages/pikepdf \ + ${libdir}/${PYTHON_DIR}/site-packages/pikepdf-${PV}.dist-info \ +" + +BBCLASSEXTEND = "native nativesdk"
Valkey is an open source, in-memory data store. Release 8.0.0 is fully compatible with Redis OSS 7.2.4 and brings: - Added full client info to SHUTDOWN and CLUSTER FAILOVER logs for better traceability of requests. - Resolved issues in replicationSetPrimary where the primary node's IP/port updates were not correctly handled in the cluster gossip section. - Fixed AOF base suffix during rewrites when modifying the aof-use-rdb-preamble setting, ensuring correct suffix caching to prevent inconsistencies. - Addressed rare crashes in async IO threads with TLS by preventing concurrent read and write job overlap. - Prevented AOF from being incorrectly disabled after loading RDB data, ensuring proper re-enabling of AOF. - Triggered a save of the cluster configuration file before shutdown to prevent inconsistencies caused by unsaved node configuration changes. - Fixed timing issue in CLUSTER SETSLOT to ensure replicas handle migration correctly when receiving the command before the gossip update. - Optimized the handling of temporary set objects in SUNION and SDIFF commands, resulting in a 41% performance improvement for SUNION and 27% for SDIFF. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> --- .../0001-src-Do-not-reset-FINAL_LIBS.patch | 33 + .../valkey/valkey/GNU_SOURCE-7.patch | 29 + .../hiredis-use-default-CC-if-it-is-set.patch | 41 + .../valkey/valkey/init-valkey-server | 71 + ...ile-to-use-environment-build-setting.patch | 78 + .../valkey/valkey/oe-use-libc-malloc.patch | 39 + .../valkey/valkey/valkey.conf | 1314 +++++++++++++++++ .../valkey/valkey/valkey.service | 16 + .../recipes-extended/valkey/valkey_8.0.0.bb | 74 + .../python/python3-pikepdf/run-ptest | 3 + .../python/python3-pikepdf_8.6.0.bb | 45 + 11 files changed, 1743 insertions(+) create mode 100644 meta-oe/recipes-extended/valkey/valkey/0001-src-Do-not-reset-FINAL_LIBS.patch create mode 100644 meta-oe/recipes-extended/valkey/valkey/GNU_SOURCE-7.patch create mode 100644 meta-oe/recipes-extended/valkey/valkey/hiredis-use-default-CC-if-it-is-set.patch create mode 100755 meta-oe/recipes-extended/valkey/valkey/init-valkey-server create mode 100644 meta-oe/recipes-extended/valkey/valkey/lua-update-Makefile-to-use-environment-build-setting.patch create mode 100644 meta-oe/recipes-extended/valkey/valkey/oe-use-libc-malloc.patch create mode 100644 meta-oe/recipes-extended/valkey/valkey/valkey.conf create mode 100644 meta-oe/recipes-extended/valkey/valkey/valkey.service create mode 100644 meta-oe/recipes-extended/valkey/valkey_8.0.0.bb create mode 100644 meta-python/recipes-devtools/python/python3-pikepdf/run-ptest create mode 100644 meta-python/recipes-devtools/python/python3-pikepdf_8.6.0.bb