@@ -158,7 +158,6 @@ RDEPENDS:packagegroup-meta-networking-protocols = "\
openl2tp \
mdns \
nopoll \
- quagga \
radiusclient-ng \
tsocks \
openlldp \
deleted file mode 100644
@@ -1,32 +0,0 @@
-From 675b35b7ed416c837267e493b157167319e8f5fa Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Thu, 1 Sep 2022 11:01:53 -0700
-Subject: [PATCH] configure: Check for readline() instead of main() in
- libreadline
-
-while checking for presense of libreadline, poke for a function which is
-provided by libreadline, main is not provided by it, so modern compiler
-toolchains may complain about it.
-
-Upstream-Status: Submitted [https://github.com/Quagga/quagga/pull/9]
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index ed279f48..d444ab4a 100755
---- a/configure.ac
-+++ b/configure.ac
-@@ -754,7 +754,7 @@ dnl [TODO] on Linux, and in [TODO] on Solaris.
- )]
- )]
- )
-- AC_CHECK_LIB(readline, main, LIBREADLINE="-lreadline $LIBREADLINE",,
-+ AC_CHECK_LIB(readline, readline, LIBREADLINE="-lreadline $LIBREADLINE",,
- "$LIBREADLINE")
- if test $ac_cv_lib_readline_main = no; then
- AC_MSG_ERROR([vtysh needs libreadline but was not found and usable on your system.])
-2.37.3
-
deleted file mode 100644
@@ -1,15 +0,0 @@
-[Unit]
-Description=BGP routing daemon
-BindTo=zebra.service
-After=zebra.service
-ConditionPathExists=@SYSCONFDIR@/quagga/bgpd.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStart=@SBINDIR@/bgpd -d $bgpd_options -f @SYSCONFDIR@/quagga/bgpd.conf
-ExecStopPost=@base_bindir@/rm -rf /run/quagga/bgpd.pid
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,14 +0,0 @@
-[Unit]
-Description=IS-IS routing daemon
-BindTo=zebra.service
-After=zebra.service
-ConditionPathExists=@SYSCONFDIR@/quagga/isisd.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStart=@SBINDIR@/isisd -d $isisd_options -f /etc/quagga/isisd.conf
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,15 +0,0 @@
-[Unit]
-Description=OSPF routing daemon for IPv6
-BindTo=zebra.service
-After=zebra.service
-ConditionPathExists=@SYSCONFDIR@/quagga/ospf6d.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStart=@SBINDIR@/ospf6d -d $ospf6d_options -f @SYSCONFDIR@/quagga/ospf6d.conf
-ExecStopPost=@base_bindir@/rm -rf /run/quagga/ospf6d.pid
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,15 +0,0 @@
-[Unit]
-Description=OSPF routing daemon
-BindTo=zebra.service
-After=zebra.service
-ConditionPathExists=@SYSCONFDIR@/quagga/ospfd.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStart=@SBINDIR@/ospfd -d $ospfd_options -f @SYSCONFDIR@/quagga/ospfd.conf
-ExecStopPost=@base_bindir@/rm -rf /run/quagga/ospfd.pid
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,12 +0,0 @@
-# If this option is set the /etc/init.d/quagga script automatically loads
-# the config via "vtysh -b" when the servers are started.
-vtysh_enable=yes
-
-# Bind all daemons to loopback only by default
-zebra_options=" --daemon -A 127.0.0.1"
-bgpd_options=" --daemon -A 127.0.0.1"
-ospfd_options=" --daemon -A 127.0.0.1"
-ospf6d_options="--daemon -A ::1"
-ripd_options=" --daemon -A 127.0.0.1"
-ripngd_options="--daemon -A ::1"
-isisd_options=" --daemon -A 127.0.0.1"
deleted file mode 100644
@@ -1,200 +0,0 @@
-#!/bin/sh
-#
-# /etc/init.d/quagga -- start/stop the Quagga routing daemons
-#
-# Based on debian version by Endre Hirling <endre@mail.elte.hu> and
-# Christian Hammers <ch@debian.org>.
-#
-
-### BEGIN INIT INFO
-# Provides: quagga
-# Required-Start: $local_fs $network $remote_fs $syslog
-# Required-Stop: $local_fs $network $remote_fs $syslog
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: start and stop the Quagga routing suite
-# Description: Quagga is a routing suite for IP routing protocols like
-# BGP, OSPF, RIP and others. This script contols the main
-# daemon "quagga" as well as the individual protocol daemons.
-### END INIT INFO
-
-# NOTE: sbin must be before bin so we get the iproute2 ip and not the
-# busybox ip command. The busybox one flushes all routes instead of just
-# the dynamic routes
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:/sbin
-D_PATH=/usr/sbin
-C_PATH=/etc/quagga
-
-# Keep zebra first and do not list watchquagga!
-DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd"
-
-# Print the name of the pidfile.
-pidfile()
-{
- echo "/var/run/quagga/$1.pid"
-}
-
-# Check if daemon is started by using the pidfile.
-started()
-{
- [ -e `pidfile $1` ] && kill -0 `cat \`pidfile $1\`` 2> /dev/null && return 0
- return 1
-}
-
-# Loads the config via vtysh -b if configured to do so.
-vtysh_b ()
-{
- # Rember, that all variables have been incremented by 1 in convert_daemon_prios()
- if [ "$vtysh_enable" = 2 -a -f $C_PATH/Quagga.conf ]; then
- /usr/bin/vtysh -b
- fi
-}
-
-# Check if the daemon is activated and if its executable and config files
-# are in place.
-# params: daemon name
-# returns: 0=ok, 1=error
-check_daemon()
-{
- # If the integrated config file is used the others are not checked.
- if [ -r "$C_PATH/Quagga.conf" ]; then
- return 0
- fi
-
- # check for config file
- if [ ! -r "$C_PATH/$1.conf" ]; then
- return 1
- fi
- return 0
-}
-
-# Starts the server if it's not alrady running according to the pid file.
-# The Quagga daemons creates the pidfile when starting.
-start()
-{
- if ! check_daemon $1; then echo -n " (!$1)"; return; fi
- echo -n " $1"
- start-stop-daemon \
- --start \
- --pidfile=`pidfile $1` \
- --exec "$D_PATH/$1" \
- -- \
- `eval echo "$""$1""_options"`
-
-}
-
-# Stop the daemon given in the parameter, printing its name to the terminal.
-stop()
-{
- if ! started "$1" ; then
- echo -n " (!$1)"
- return 0
- else
- PIDFILE=`pidfile $1`
- PID=`cat $PIDFILE 2>/dev/null`
- start-stop-daemon --stop --quiet --exec "$D_PATH/$1"
- #
- # Now we have to wait until $DAEMON has _really_ stopped.
- #
- if test -n "$PID" && kill -0 $PID 2>/dev/null; then
- echo -n " (waiting) ."
- cnt=0
- while kill -0 $PID 2>/dev/null; do
- cnt=`expr $cnt + 1`
- if [ $cnt -gt 60 ]; then
- # Waited 120 secs now, fail.
- echo -n "Failed.. "
- break
- fi
- sleep 2
- echo -n "."
- done
- fi
- echo -n " $1"
- rm -f `pidfile $1`
- fi
-}
-
-stop_all()
-{
- local daemon_list
- daemon_list=${1:-$DAEMONS}
-
- echo -n "Stopping Quagga daemons:"
- for daemon_name in $daemon_list; do
- stop "$daemon_name"
- done
- echo "."
-}
-
-start_all()
-{
- local daemon_list
- daemon_list=${1:-$DAEMONS}
-
- echo -n "Starting Quagga daemons:"
- for daemon_name in $daemon_list; do
- start "$daemon_name"
- done
- echo "."
-}
-
-status_all()
-{
- local daemon_list
- daemon_list=${1:-$DAEMONS}
- res=1
-
- echo -n "quagga: "
- for daemon_name in $daemon_list; do
- if started "$daemon_name" ; then
- id=`cat \`pidfile $daemon_name\``
- echo -n "$daemon_name (pid $id) "
- res=0
- fi
- done
- if [ $res -eq 0 ]; then
- echo "is running..."
- else
- echo "is stopped..."
- fi
- exit $res
-}
-
-#########################################################
-# Main program #
-#########################################################
-
-# Load configuration
-test -f /etc/default/quagga && . /etc/default/quagga
-
-case "$1" in
- start)
- cd $C_PATH/
- start_all $2
- vtysh_b
- ;;
-
- stop)
- stop_all $2
- echo "Removing all routes made by zebra."
- ip route flush proto zebra
- ;;
-
- status)
- status_all $2
- ;;
-
- restart|force-reload)
- $0 stop $2
- sleep 1
- $0 start $2
- ;;
-
- *)
- echo "Usage: /etc/init.d/quagga {start|stop|restart|status|force-reload} [daemon]"
- exit 1
- ;;
-esac
-
-exit 0
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# The PAM configuration file for the quagga `vtysh' service
-#
-
-# This allows root to change user infomation without being
-# prompted for a password
-auth sufficient pam_rootok.so
-
-# The standard Unix authentication modules, used with
-# NIS (man nsswitch) as well as normal /etc/passwd and
-# /etc/shadow entries.
-auth include common-auth
-
deleted file mode 100644
@@ -1,15 +0,0 @@
-[Unit]
-Description=RIP routing daemon
-BindTo=zebra.service
-After=zebra.service
-ConditionPathExists=@SYSCONFDIR@/quagga/ripd.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStart=@SBINDIR@/ripd -d $ripd_options -f @SYSCONFDIR@/quagga/ripd.conf
-ExecStopPost=@base_bindir@/rm -rf /run/quagga/ripd.pid
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,15 +0,0 @@
-[Unit]
-Description=RIP routing daemon for IPv6
-BindTo=zebra.service
-After=zebra.service
-ConditionPathExists=@SYSCONFDIR@/quagga/ripngd.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStart=@SBINDIR@/ripngd -d $ripngd_options -f @SYSCONFDIR@/quagga/ripngd.conf
-ExecStopPost=@base_bindir@/rm -rf /run/quagga/ripngd.pid
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,3 +0,0 @@
-# <type> <owner> <group> <mode> <path> <linksource>
-d quagga quagga 0755 /var/run/quagga none
-d quagga quagga 0755 /var/log/quagga none
deleted file mode 100644
@@ -1,12 +0,0 @@
-# Watchquagga configuration
-#watch_daemons="zebra bgpd ospfd ospf6d ripd ripngd"
-watch_daemons="zebra"
-
-# To enable restarts when multiple daemons are being used, uncomment this line (but first be sure to edit
-# the WATCH_DAEMONS line to reflect the daemons you are actually using):
-#watch_options="-Az -b_ -r/etc/init.d/quagga_restart_%s -s/etc/init.d/quagga_start_%s -k/etc/init.d/quagga_stop_%s"
-
-# Since we are using one quagga daemon for now, use the following line. If using
-# multiple daemons, comment the line below and uncoment the line mentioned
-# above.
-watch_options="-z -b_ -r/etc/init.d/quagga_restart_%s"
deleted file mode 100644
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-### BEGIN INIT INFO
-# Provides: watchquagga
-# Required-Start: $local_fs $network $remote_fs $syslog
-# Required-Stop: $local_fs $network $remote_fs $syslog
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: start and stop the Quagga watchdog
-### END INIT INFO
-
-PATH=/bin:/usr/bin:/sbin:/usr/sbin
-
-# Load configuration
-test -f /etc/default/watchquagga && . /etc/default/watchquagga
-
-# Check that there are daemons to be monitored.
-[ -z "$watch_daemons" ] && exit 0
-
-pidfile="/var/run/quagga/watchquagga.pid"
-
-case "$1" in
- start)
- echo -n "Starting quagga watchdog daemon: watchquagga"
- start-stop-daemon --start \
- --pidfile $pidfile \
- --exec /usr/sbin/watchquagga \
- -- -d $watch_options $watch_daemons
- echo "."
- ;;
-
- stop)
- echo -n "Stopping quagga watchdog daemon: watchquagga"
- start-stop-daemon --stop --quiet \
- --pidfile $pidfile
- echo "."
- ;;
-
- status)
- echo -n "watchquagga "
- res=1
- [ -e $pidfile ] && kill -0 `cat $pidfile` 2> /dev/null
- if [ $? -eq 0 ]; then
- echo "(pid `cat $pidfile`) is running..."
- res=0
- else
- echo "is stopped..."
- fi
- exit $res
- ;;
-
- restart|force-reload)
- $0 stop $2
- sleep 1
- $0 start $2
- ;;
-
- *)
- echo "Usage: /etc/init.d/watchquagga {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
deleted file mode 100644
@@ -1,16 +0,0 @@
-[Unit]
-Description=GNU Zebra routing manager
-Wants=network.target
-Before=network.target
-ConditionPathExists=@SYSCONFDIR@/quagga/zebra.conf
-
-[Service]
-Type=forking
-EnvironmentFile=-@SYSCONFDIR@/default/quagga
-ExecStartPre=@BASE_SBINDIR@/ip route flush proto zebra
-ExecStart=@SBINDIR@/zebra -d $zebra_options -f @SYSCONFDIR@/quagga/zebra.conf
-ExecStopPost=@base_bindir@/rm -rf /run/quagga/zebra.pid
-Restart=on-abort
-
-[Install]
-WantedBy=multi-user.target
deleted file mode 100644
@@ -1,243 +0,0 @@
-SUMMARY = "BGP/OSPF/RIP routing daemon"
-DESCRIPTION = "Quagga is a routing software suite, providing \
-implementations of OSPFv2, OSPFv3, RIP v1 and v2, RIPv3 and BGPv4 for \
-Unix platforms, particularly FreeBSD, Linux, Solaris and NetBSD. \
-Quagga is a fork of GNU Zebra which was developed by Kunihiro \
-Ishiguro. The Quagga tree aims to build a more involved community \
-around Quagga than the current centralised model of GNU Zebra."
-HOMEPAGE = "http://www.nongnu.org/quagga/"
-SECTION = "net"
-
-
-LICENSE = "GPL-2.0-only & LGPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=81bcece21748c91ba9992349a91ec11d \
- file://COPYING.LIB;md5=01ef24401ded36cd8e5d18bfe947240c"
-
-DEPENDS = "readline ncurses perl-native c-ares"
-DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'snmp', 'net-snmp', '', d)}"
-SNMP_CONF="${@bb.utils.contains('DISTRO_FEATURES', 'snmp', '--enable-snmp', '', d)}"
-
-# the "ip" command from busybox is not sufficient (flush by protocol flushes all routes)
-RDEPENDS:${PN} += "iproute2"
-
-SRC_URI = "https://github.com/Quagga/quagga/releases/download/quagga-${PV}/quagga-${PV}.tar.gz \
- file://quagga.init \
- file://quagga.default \
- file://watchquagga.init \
- file://watchquagga.default \
- file://volatiles.03_quagga \
- file://quagga.pam \
- file://bgpd.service \
- file://isisd.service \
- file://ospf6d.service \
- file://ospfd.service \
- file://ripd.service \
- file://ripngd.service \
- file://zebra.service \
- "
-
-PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'pam', d)}"
-PACKAGECONFIG[cap] = "--enable-capabilities,--disable-capabilities,libcap"
-PACKAGECONFIG[pam] = "--with-libpam, --without-libpam, libpam"
-
-inherit autotools update-rc.d useradd systemd pkgconfig multilib_header update-alternatives
-
-CFLAGS += "-fcommon"
-
-SYSTEMD_PACKAGES = "${PN} ${PN}-bgpd ${PN}-isisd ${PN}-ospf6d ${PN}-ospfd ${PN}-ripd ${PN}-ripngd"
-SYSTEMD_SERVICE:${PN}-bgpd = "bgpd.service"
-SYSTEMD_SERVICE:${PN}-isisd = "isisd.service"
-SYSTEMD_SERVICE:${PN}-ospf6d = "ospf6d.service"
-SYSTEMD_SERVICE:${PN}-ospfd = "ospfd.service"
-SYSTEMD_SERVICE:${PN}-ripd = "ripd.service"
-SYSTEMD_SERVICE:${PN}-ripngd = "ripngd.service"
-SYSTEMD_SERVICE:${PN} = "zebra.service"
-
-EXTRA_OECONF = "--sysconfdir=${sysconfdir}/quagga \
- --localstatedir=${localstatedir}/run/quagga \
- --enable-exampledir=${docdir}/quagga/examples/ \
- --enable-vtysh \
- --enable-isisd \
- ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', '--enable-watchquagga', '--disable-watchquagga', d)} \
- --enable-ospfclient=yes \
- --enable-multipath=64 \
- --enable-user=quagga \
- --enable-group=quagga \
- --enable-vty-group=quaggavty \
- --enable-configfile-mask=0640 \
- --enable-logfile-mask=0640 \
- --enable-rtadv \
- --enable-linux24-tcp-md5 \
- ap_cv_cc_pie=no \
- ${SNMP_CONF}"
-
-CACHED_CONFIGUREVARS += "ac_cv_path_PERL='/usr/bin/env perl'"
-
-do_install () {
- # Install init script and default settings
- install -m 0755 -d ${D}${sysconfdir}/default ${D}${sysconfdir}/init.d \
- ${D}${sysconfdir}/quagga ${D}${sysconfdir}/default/volatiles
- install -m 0644 ${WORKDIR}/quagga.default ${D}${sysconfdir}/default/quagga
- install -m 0644 ${WORKDIR}/watchquagga.default ${D}${sysconfdir}/default/watchquagga
- install -m 0755 ${WORKDIR}/quagga.init ${D}${sysconfdir}/init.d/quagga
- install -m 0755 ${WORKDIR}/watchquagga.init ${D}${sysconfdir}/init.d/watchquagga
- install -m 0644 ${WORKDIR}/volatiles.03_quagga ${D}${sysconfdir}/default/volatiles/03_quagga
-
- # Install sample configurations for the daemons
- for f in bgpd vtysh isisd ospfd ripngd zebra ripd ospf6d; do
- install -m 0640 ${S}/$f/$f.conf.sample ${D}${sysconfdir}/quagga/$f.conf.sample
- done
-
- for f in bgpd vtysh isisd ospfd ripngd zebra ripd ospf6d; do
- touch ${D}${sysconfdir}/quagga/$f.conf
- done
- chown quagga:quaggavty ${D}${sysconfdir}/quagga
- chown quagga:quagga ${D}${sysconfdir}/quagga/*.conf
- chmod 750 ${D}${sysconfdir}/quagga
- chmod 640 ${D}${sysconfdir}/quagga/*.conf
-
- # Install quagga
- oe_runmake install DESTDIR=${D} prefix=${prefix} \
- sbindir=${sbindir} \
- sysconfdir=${sysconfdir}/quagga \
- localstatedir=${localstatedir}/run/quagga
-
- # Fix hardcoded paths
- sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/*
- sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/quagga
- sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/* ${D}${sysconfdir}/default/watchquagga
- sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/* ${D}${sysconfdir}/default/volatiles/03_quagga
- sed -i 's!^PATH=.*!PATH=${base_sbindir}:${sbindir}:${base_bindir}:${bindir}!' ${D}${sysconfdir}/init.d/*
- sed -i 's!--with-libtool-sysroot=[^ "]*!!' ${D}${includedir}/quagga/version.h
-
- oe_multilib_header quagga/version.h
-
- # For PAM
- for feature in ${DISTRO_FEATURES}; do
- if [ "$feature" = "pam" ]; then
- install -D -m 644 ${WORKDIR}/quagga.pam ${D}/${sysconfdir}/pam.d/quagga
- break
- fi
- done
-
- if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
- install -d ${D}${nonarch_libdir}/tmpfiles.d
- echo "d /run/quagga 0755 quagga quagga -" \
- > ${D}${nonarch_libdir}/tmpfiles.d/${BPN}.conf
- fi
-
- # Remove sysinit script if sysvinit is not in DISTRO_FEATURES
- if ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'false', 'true', d)}; then
- rm -rf ${D}${sysconfdir}/init.d/
- rm -f ${D}${sysconfdir}/default/watchquagga
- fi
-
- install -d ${D}${systemd_unitdir}/system
- for i in bgpd isisd ospf6d ospfd ripd ripngd zebra; do
- install -m 0644 ${WORKDIR}/$i.service ${D}${systemd_unitdir}/system
- done
- sed -e 's,@BASE_SBINDIR@,${base_sbindir},g' \
- -e 's,@SYSCONFDIR@,${sysconfdir},g' \
- -e 's,@SBINDIR@,${sbindir},g' \
- -e 's,@base_bindir@,${base_bindir},g' \
- -e 's,@localstatedir@,${localstatedir},g' \
- -i ${D}${systemd_unitdir}/system/*.service
-}
-
-DEPENDS:append = " ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd-systemctl-native', '', d)}"
-pkg_postinst:${PN} () {
- if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd sysvinit', 'true', 'false', d)}; then
- if [ -n "$D" ]; then
- OPTS="--root=$D"
- fi
- systemctl $OPTS mask quagga.service
- fi
-}
-
-# Split into a main package and separate per-protocol packages
-PACKAGE_BEFORE_PN = "${PN}-ospfd ${PN}-ospf6d ${PN}-bgpd \
- ${PN}-ripd ${PN}-ripngd ${PN}-isisd \
- ${PN}-ospfclient ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', '${PN}-watchquagga', '', d)}"
-
-RDEPENDS:${PN} += "${PN}-bgpd ${PN}-isisd ${PN}-ospf6d ${PN}-ospfd ${PN}-ripd ${PN}-ripngd"
-
-FILES:${PN}-ospfd = "${sbindir}/ospfd ${libdir}/libospf.so.*"
-FILES:${PN}-ospf6d = "${sbindir}/ospf6d"
-FILES:${PN}-bgpd = "${sbindir}/bgpd"
-FILES:${PN}-ripd = "${sbindir}/ripd"
-FILES:${PN}-ripngd = "${sbindir}/ripngd"
-FILES:${PN}-isisd = "${sbindir}/isisd"
-FILES:${PN}-ospfclient = "${sbindir}/ospfclient ${libdir}/libospfapiclient.so.*"
-FILES:${PN}-watchquagga = "${sbindir}/watchquagga ${sysconfdir}/default/watchquagga \
- ${sysconfdir}/init.d/watchquagga"
-
-FILES:${PN} += "${nonarch_libdir}/tmpfiles.d/*.conf"
-
-# Indicate that the default files are configuration files
-CONFFILES:${PN} = "${sysconfdir}/default/quagga \
- ${sysconfdir}/quagga/bgpd.conf \
- ${sysconfdir}/quagga/vtysh.conf \
- ${sysconfdir}/quagga/isisd.conf \
- ${sysconfdir}/quagga/ospfd.conf \
- ${sysconfdir}/quagga/ripngd.conf \
- ${sysconfdir}/quagga/zebra.conf \
- ${sysconfdir}/quagga/ripd.conf \
- ${sysconfdir}/quagga/ospf6d.conf \
- "
-CONFFILES:${PN}-watchquagga = "${sysconfdir}/default/watchquagga"
-
-# Stop the names being rewritten due to the internal shared libraries
-DEBIAN_NOAUTONAME:${PN}-ospfd = "1"
-DEBIAN_NOAUTONAME:${PN}-ospfclient = "1"
-
-# Main init script starts all deamons
-# Seperate init script for watchquagga
-INITSCRIPT_PACKAGES = "${PN} ${PN}-watchquagga"
-INITSCRIPT_NAME:${PN} = "quagga"
-INITSCRIPT_PARAMS:${PN} = "defaults 15 85"
-INITSCRIPT_NAME:${PN}-watchquagga = "watchquagga"
-INITSCRIPT_PARAMS:${PN}-watchquagga = "defaults 90 10"
-
-# Add quagga's user and group
-USERADD_PACKAGES = "${PN}"
-GROUPADD_PARAM:${PN} = "--system quagga ; --system quaggavty"
-USERADD_PARAM:${PN} = "--system --home ${localstatedir}/run/quagga/ -M -g quagga -G quaggavty --shell /bin/false quagga"
-
-pkg_postinst:${PN} () {
- if [ -z "$D" ] && [ -e /etc/init.d/populate-volatile.sh ] ; then
- ${sysconfdir}/init.d/populate-volatile.sh update
- fi
-}
-
-# Stop apps before uninstall
-pkg_prerm:${PN} () {
- ${sysconfdir}/init.d/quagga stop
-}
-
-pkg_prerm:${PN}-ospfd () {
- ${sysconfdir}/init.d/quagga stop ospfd
-}
-
-pkg_prerm:${PN}-ospf6d () {
- ${sysconfdir}/init.d/quagga stop ospf6d
-}
-
-pkg_prerm:${PN}-bgpd () {
- ${sysconfdir}/init.d/quagga stop bgpd
-}
-
-pkg_prerm:${PN}-ripd () {
- ${sysconfdir}/init.d/quagga stop ripd
-}
-
-pkg_prerm:${PN}-ripngd () {
- ${sysconfdir}/init.d/quagga stop ripngd
-}
-
-pkg_prerm:${PN}-isisd () {
- ${sysconfdir}/init.d/quagga stop isisd
-}
-
-ALTERNATIVE:${PN} = "pimd"
-ALTERNATIVE_LINK_NAME[pimd] = "${sbindir}/pimd"
-
deleted file mode 100644
@@ -1,10 +0,0 @@
-require quagga.inc
-
-SRC_URI += "file://0001-configure-Check-for-readline-instead-of-main-in-libr.patch"
-
-SRC_URI[md5sum] = "eced21b054d71c9e1b7c6ac43286a166"
-SRC_URI[sha256sum] = "e364c082c3309910e1eb7b068bf39ee298e2f2f3f31a6431a5c115193bd653d3"
-
-CVE_CHECK_IGNORE += "\
- CVE-2016-4049 \
-"
Quagga is no longer maintained since 2018[1]. Its official repository is not even available[2]. As an alternative, users can use FRRouting[3] which has been added to meta-networking[4]. [1] https://github.com/Quagga/quagga [2] https://git.savannah.gnu.org/cgit/quagga.git [3] https://frrouting.org [4] https://git.openembedded.org/meta-openembedded/tree/meta-networking/recipes-protocols/frr Signed-off-by: Yi Zhao <yi.zhao@windriver.com> --- .../packagegroup-meta-networking.bb | 1 - ...for-readline-instead-of-main-in-libr.patch | 32 --- .../quagga/files/bgpd.service | 15 -- .../quagga/files/isisd.service | 14 - .../quagga/files/ospf6d.service | 15 -- .../quagga/files/ospfd.service | 15 -- .../quagga/files/quagga.default | 12 - .../quagga/files/quagga.init | 200 -------------- .../recipes-protocols/quagga/files/quagga.pam | 13 - .../quagga/files/ripd.service | 15 -- .../quagga/files/ripngd.service | 15 -- .../quagga/files/volatiles.03_quagga | 3 - .../quagga/files/watchquagga.default | 12 - .../quagga/files/watchquagga.init | 64 ----- .../quagga/files/zebra.service | 16 -- .../recipes-protocols/quagga/quagga.inc | 243 ------------------ .../recipes-protocols/quagga/quagga_1.2.4.bb | 10 - 17 files changed, 695 deletions(-) delete mode 100644 meta-networking/recipes-protocols/quagga/files/0001-configure-Check-for-readline-instead-of-main-in-libr.patch delete mode 100644 meta-networking/recipes-protocols/quagga/files/bgpd.service delete mode 100644 meta-networking/recipes-protocols/quagga/files/isisd.service delete mode 100644 meta-networking/recipes-protocols/quagga/files/ospf6d.service delete mode 100644 meta-networking/recipes-protocols/quagga/files/ospfd.service delete mode 100644 meta-networking/recipes-protocols/quagga/files/quagga.default delete mode 100644 meta-networking/recipes-protocols/quagga/files/quagga.init delete mode 100644 meta-networking/recipes-protocols/quagga/files/quagga.pam delete mode 100644 meta-networking/recipes-protocols/quagga/files/ripd.service delete mode 100644 meta-networking/recipes-protocols/quagga/files/ripngd.service delete mode 100644 meta-networking/recipes-protocols/quagga/files/volatiles.03_quagga delete mode 100644 meta-networking/recipes-protocols/quagga/files/watchquagga.default delete mode 100644 meta-networking/recipes-protocols/quagga/files/watchquagga.init delete mode 100644 meta-networking/recipes-protocols/quagga/files/zebra.service delete mode 100644 meta-networking/recipes-protocols/quagga/quagga.inc delete mode 100644 meta-networking/recipes-protocols/quagga/quagga_1.2.4.bb