deleted file mode 100644
@@ -1,33 +0,0 @@
-From 57b12a1e43605f71239a21488cb9b541f0751dda Mon Sep 17 00:00:00 2001
-From: Alex Kiernan <alexk@zuma.ai>
-Date: Thu, 21 Apr 2022 10:15:29 +0100
-Subject: [PATCH] Install wpa_passphrase when not disabled
-
-As part of fixing CONFIG_NO_WPA_PASSPHRASE, whilst wpa_passphrase gets
-built, its not installed during `make install`.
-
-Fixes: cb41c214b78d ("build: Re-enable options for libwpa_client.so and wpa_passphrase")
-Signed-off-by: Alex Kiernan <alexk@zuma.ai>
-Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
-Upstream-Status: Submitted [http://lists.infradead.org/pipermail/hostap/2022-April/040448.html]
----
- wpa_supplicant/Makefile | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
-index 0bab313f2355..12787c0c7d0f 100644
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -73,6 +73,9 @@ $(DESTDIR)$(BINDIR)/%: %
-
- install: $(addprefix $(DESTDIR)$(BINDIR)/,$(BINALL))
- $(MAKE) -C ../src install
-+ifndef CONFIG_NO_WPA_PASSPHRASE
-+ install -D wpa_passphrase $(DESTDIR)/$(BINDIR)/wpa_passphrase
-+endif
- ifdef CONFIG_BUILD_WPA_CLIENT_SO
- install -m 0644 -D libwpa_client.so $(DESTDIR)/$(LIBDIR)/libwpa_client.so
- install -m 0644 -D ../src/common/wpa_ctrl.h $(DESTDIR)/$(INCDIR)/wpa_ctrl.h
-2.35.1
-
deleted file mode 100644
@@ -1,213 +0,0 @@
-From f6f7cead3661ceeef54b21f7e799c0afc98537ec Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Sat, 8 Jul 2023 19:55:32 +0300
-Subject: [PATCH] PEAP client: Update Phase 2 authentication requirements
-
-The previous PEAP client behavior allowed the server to skip Phase 2
-authentication with the expectation that the server was authenticated
-during Phase 1 through TLS server certificate validation. Various PEAP
-specifications are not exactly clear on what the behavior on this front
-is supposed to be and as such, this ended up being more flexible than
-the TTLS/FAST/TEAP cases. However, this is not really ideal when
-unfortunately common misconfiguration of PEAP is used in deployed
-devices where the server trust root (ca_cert) is not configured or the
-user has an easy option for allowing this validation step to be skipped.
-
-Change the default PEAP client behavior to be to require Phase 2
-authentication to be successfully completed for cases where TLS session
-resumption is not used and the client certificate has not been
-configured. Those two exceptions are the main cases where a deployed
-authentication server might skip Phase 2 and as such, where a more
-strict default behavior could result in undesired interoperability
-issues. Requiring Phase 2 authentication will end up disabling TLS
-session resumption automatically to avoid interoperability issues.
-
-Allow Phase 2 authentication behavior to be configured with a new phase1
-configuration parameter option:
-'phase2_auth' option can be used to control Phase 2 (i.e., within TLS
-tunnel) behavior for PEAP:
- * 0 = do not require Phase 2 authentication
- * 1 = require Phase 2 authentication when client certificate
- (private_key/client_cert) is no used and TLS session resumption was
- not used (default)
- * 2 = require Phase 2 authentication in all cases
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
-
-CVE: CVE-2023-52160
-Upstream-Status: Backport [https://w1.fi/cgit/hostap/commit/?id=8e6485a1bcb0baffdea9e55255a81270b768439c]
-
-Signed-off-by: Claus Stovgaard <claus.stovgaard@gmail.com>
-
----
- src/eap_peer/eap_config.h | 8 ++++++
- src/eap_peer/eap_peap.c | 40 +++++++++++++++++++++++++++---
- src/eap_peer/eap_tls_common.c | 6 +++++
- src/eap_peer/eap_tls_common.h | 5 ++++
- wpa_supplicant/wpa_supplicant.conf | 7 ++++++
- 5 files changed, 63 insertions(+), 3 deletions(-)
-
-diff --git a/src/eap_peer/eap_config.h b/src/eap_peer/eap_config.h
-index 3238f74..047eec2 100644
---- a/src/eap_peer/eap_config.h
-+++ b/src/eap_peer/eap_config.h
-@@ -469,6 +469,14 @@ struct eap_peer_config {
- * 1 = use cryptobinding if server supports it
- * 2 = require cryptobinding
- *
-+ * phase2_auth option can be used to control Phase 2 (i.e., within TLS
-+ * tunnel) behavior for PEAP:
-+ * 0 = do not require Phase 2 authentication
-+ * 1 = require Phase 2 authentication when client certificate
-+ * (private_key/client_cert) is no used and TLS session resumption was
-+ * not used (default)
-+ * 2 = require Phase 2 authentication in all cases
-+ *
- * EAP-WSC (WPS) uses following options: pin=Device_Password and
- * uuid=Device_UUID
- *
-diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c
-index 12e30df..6080697 100644
---- a/src/eap_peer/eap_peap.c
-+++ b/src/eap_peer/eap_peap.c
-@@ -67,6 +67,7 @@ struct eap_peap_data {
- u8 cmk[20];
- int soh; /* Whether IF-TNCCS-SOH (Statement of Health; Microsoft NAP)
- * is enabled. */
-+ enum { NO_AUTH, FOR_INITIAL, ALWAYS } phase2_auth;
- };
-
-
-@@ -114,6 +115,19 @@ static void eap_peap_parse_phase1(struct eap_peap_data *data,
- wpa_printf(MSG_DEBUG, "EAP-PEAP: Require cryptobinding");
- }
-
-+ if (os_strstr(phase1, "phase2_auth=0")) {
-+ data->phase2_auth = NO_AUTH;
-+ wpa_printf(MSG_DEBUG,
-+ "EAP-PEAP: Do not require Phase 2 authentication");
-+ } else if (os_strstr(phase1, "phase2_auth=1")) {
-+ data->phase2_auth = FOR_INITIAL;
-+ wpa_printf(MSG_DEBUG,
-+ "EAP-PEAP: Require Phase 2 authentication for initial connection");
-+ } else if (os_strstr(phase1, "phase2_auth=2")) {
-+ data->phase2_auth = ALWAYS;
-+ wpa_printf(MSG_DEBUG,
-+ "EAP-PEAP: Require Phase 2 authentication for all cases");
-+ }
- #ifdef EAP_TNC
- if (os_strstr(phase1, "tnc=soh2")) {
- data->soh = 2;
-@@ -142,6 +156,7 @@ static void * eap_peap_init(struct eap_sm *sm)
- data->force_peap_version = -1;
- data->peap_outer_success = 2;
- data->crypto_binding = OPTIONAL_BINDING;
-+ data->phase2_auth = FOR_INITIAL;
-
- if (config && config->phase1)
- eap_peap_parse_phase1(data, config->phase1);
-@@ -454,6 +469,20 @@ static int eap_tlv_validate_cryptobinding(struct eap_sm *sm,
- }
-
-
-+static bool peap_phase2_sufficient(struct eap_sm *sm,
-+ struct eap_peap_data *data)
-+{
-+ if ((data->phase2_auth == ALWAYS ||
-+ (data->phase2_auth == FOR_INITIAL &&
-+ !tls_connection_resumed(sm->ssl_ctx, data->ssl.conn) &&
-+ !data->ssl.client_cert_conf) ||
-+ data->phase2_eap_started) &&
-+ !data->phase2_eap_success)
-+ return false;
-+ return true;
-+}
-+
-+
- /**
- * eap_tlv_process - Process a received EAP-TLV message and generate a response
- * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init()
-@@ -568,6 +597,11 @@ static int eap_tlv_process(struct eap_sm *sm, struct eap_peap_data *data,
- " - force failed Phase 2");
- resp_status = EAP_TLV_RESULT_FAILURE;
- ret->decision = DECISION_FAIL;
-+ } else if (!peap_phase2_sufficient(sm, data)) {
-+ wpa_printf(MSG_INFO,
-+ "EAP-PEAP: Server indicated Phase 2 success, but sufficient Phase 2 authentication has not been completed");
-+ resp_status = EAP_TLV_RESULT_FAILURE;
-+ ret->decision = DECISION_FAIL;
- } else {
- resp_status = EAP_TLV_RESULT_SUCCESS;
- ret->decision = DECISION_UNCOND_SUCC;
-@@ -887,8 +921,7 @@ continue_req:
- /* EAP-Success within TLS tunnel is used to indicate
- * shutdown of the TLS channel. The authentication has
- * been completed. */
-- if (data->phase2_eap_started &&
-- !data->phase2_eap_success) {
-+ if (!peap_phase2_sufficient(sm, data)) {
- wpa_printf(MSG_DEBUG, "EAP-PEAP: Phase 2 "
- "Success used to indicate success, "
- "but Phase 2 EAP was not yet "
-@@ -1199,8 +1232,9 @@ static struct wpabuf * eap_peap_process(struct eap_sm *sm, void *priv,
- static bool eap_peap_has_reauth_data(struct eap_sm *sm, void *priv)
- {
- struct eap_peap_data *data = priv;
-+
- return tls_connection_established(sm->ssl_ctx, data->ssl.conn) &&
-- data->phase2_success;
-+ data->phase2_success && data->phase2_auth != ALWAYS;
- }
-
-
-diff --git a/src/eap_peer/eap_tls_common.c b/src/eap_peer/eap_tls_common.c
-index c1837db..a53eeb1 100644
---- a/src/eap_peer/eap_tls_common.c
-+++ b/src/eap_peer/eap_tls_common.c
-@@ -239,6 +239,12 @@ static int eap_tls_params_from_conf(struct eap_sm *sm,
-
- sm->ext_cert_check = !!(params->flags & TLS_CONN_EXT_CERT_CHECK);
-
-+ if (!phase2)
-+ data->client_cert_conf = params->client_cert ||
-+ params->client_cert_blob ||
-+ params->private_key ||
-+ params->private_key_blob;
-+
- return 0;
- }
-
-diff --git a/src/eap_peer/eap_tls_common.h b/src/eap_peer/eap_tls_common.h
-index 9ac0012..3348634 100644
---- a/src/eap_peer/eap_tls_common.h
-+++ b/src/eap_peer/eap_tls_common.h
-@@ -79,6 +79,11 @@ struct eap_ssl_data {
- * tls_v13 - Whether TLS v1.3 or newer is used
- */
- int tls_v13;
-+
-+ /**
-+ * client_cert_conf: Whether client certificate has been configured
-+ */
-+ bool client_cert_conf;
- };
-
-
-diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
-index 6619d6b..d63f73c 100644
---- a/wpa_supplicant/wpa_supplicant.conf
-+++ b/wpa_supplicant/wpa_supplicant.conf
-@@ -1321,6 +1321,13 @@ fast_reauth=1
- # * 0 = do not use cryptobinding (default)
- # * 1 = use cryptobinding if server supports it
- # * 2 = require cryptobinding
-+# 'phase2_auth' option can be used to control Phase 2 (i.e., within TLS
-+# tunnel) behavior for PEAP:
-+# * 0 = do not require Phase 2 authentication
-+# * 1 = require Phase 2 authentication when client certificate
-+# (private_key/client_cert) is no used and TLS session resumption was
-+# not used (default)
-+# * 2 = require Phase 2 authentication in all cases
- # EAP-WSC (WPS) uses following options: pin=<Device Password> or
- # pbc=1.
- #
deleted file mode 100644
@@ -1,73 +0,0 @@
-From cb41c214b78d6df187a31950342e48a403dbd769 Mon Sep 17 00:00:00 2001
-From: Sergey Matyukevich <geomatsi@gmail.com>
-Date: Tue, 22 Feb 2022 11:52:19 +0300
-Subject: [PATCH 1/2] build: Re-enable options for libwpa_client.so and
- wpa_passphrase
-
-Commit a41a29192e5d ("build: Pull common fragments into a build.rules
-file") introduced a regression into wpa_supplicant build process. The
-build target libwpa_client.so is not built regardless of whether the
-option CONFIG_BUILD_WPA_CLIENT_SO is set or not. This happens because
-this config option is used before it is imported from the configuration
-file. Moving its use after including build.rules does not help: the
-variable ALL is processed by build.rules and further changes are not
-applied. Similarly, option CONFIG_NO_WPA_PASSPHRASE also does not work
-as expected: wpa_passphrase is always built regardless of whether the
-option is set or not.
-
-Re-enable these options by adding both build targets to _all
-dependencies.
-
-Fixes: a41a29192e5d ("build: Pull common fragments into a build.rules file")
-Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
-Upstream-Status: Backport
-Signed-off-by: Alex Kiernan <alexk@zuma.ai>
-Signed-off-by: Alex Kiernan <alexk@gmail.com>
----
- wpa_supplicant/Makefile | 19 ++++++++++++-------
- 1 file changed, 12 insertions(+), 7 deletions(-)
-
-diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
-index cb66defac7c8..c456825ae75f 100644
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -1,24 +1,29 @@
- BINALL=wpa_supplicant wpa_cli
-
--ifndef CONFIG_NO_WPA_PASSPHRASE
--BINALL += wpa_passphrase
--endif
--
- ALL = $(BINALL)
- ALL += systemd/wpa_supplicant.service
- ALL += systemd/wpa_supplicant@.service
- ALL += systemd/wpa_supplicant-nl80211@.service
- ALL += systemd/wpa_supplicant-wired@.service
- ALL += dbus/fi.w1.wpa_supplicant1.service
--ifdef CONFIG_BUILD_WPA_CLIENT_SO
--ALL += libwpa_client.so
--endif
-
- EXTRA_TARGETS=dynamic_eap_methods
-
- CONFIG_FILE=.config
- include ../src/build.rules
-
-+ifdef CONFIG_BUILD_WPA_CLIENT_SO
-+# add the dependency this way to allow CONFIG_BUILD_WPA_CLIENT_SO
-+# being set in the config which is read by build.rules
-+_all: libwpa_client.so
-+endif
-+
-+ifndef CONFIG_NO_WPA_PASSPHRASE
-+# add the dependency this way to allow CONFIG_NO_WPA_PASSPHRASE
-+# being set in the config which is read by build.rules
-+_all: wpa_passphrase
-+endif
-+
- ifdef LIBS
- # If LIBS is set with some global build system defaults, clone those for
- # LIBS_c and LIBS_p to cover wpa_passphrase and wpa_cli as well.
-2.35.1
-
deleted file mode 100644
@@ -1,26 +0,0 @@
-From d001b301ba7987f4b39453a211631b85c48f2ff8 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <quic_jouni@quicinc.com>
-Date: Thu, 3 Mar 2022 13:26:42 +0200
-Subject: [PATCH 2/2] Fix removal of wpa_passphrase on 'make clean'
-
-Fixes: 0430bc8267b4 ("build: Add a common-clean target")
-Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
-Upstream-Status: Backport
-Signed-off-by: Alex Kiernan <alexk@zuma.ai>
-Signed-off-by: Alex Kiernan <alexk@gmail.com>
----
- wpa_supplicant/Makefile | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
-index c456825ae75f..4b4688931b1d 100644
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -2077,3 +2077,4 @@ clean: common-clean
- rm -f libwpa_client.a
- rm -f libwpa_client.so
- rm -f libwpa_test1 libwpa_test2
-+ rm -f wpa_passphrase
-2.35.1
-
similarity index 90%
rename from meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb
rename to meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.11.bb
@@ -5,8 +5,8 @@ BUGTRACKER = "http://w1.fi/security/"
SECTION = "network"
LICENSE = "BSD-3-Clause"
LIC_FILES_CHKSUM = "file://COPYING;md5=5ebcb90236d1ad640558c3d3cd3035df \
- file://README;beginline=1;endline=56;md5=e3d2f6c2948991e37c1ca4960de84747 \
- file://wpa_supplicant/wpa_supplicant.c;beginline=1;endline=12;md5=76306a95306fee9a976b0ac1be70f705"
+ file://README;beginline=1;endline=56;md5=6e4b25e7d74bfc44a32ba37bdf5210a6 \
+ file://wpa_supplicant/wpa_supplicant.c;beginline=1;endline=12;md5=f5ccd57ea91e04800edb88267bf8eae4"
DEPENDS = "dbus libnl"
@@ -15,12 +15,8 @@ SRC_URI = "http://w1.fi/releases/wpa_supplicant-${PV}.tar.gz \
file://wpa_supplicant.conf \
file://wpa_supplicant.conf-sane \
file://99_wpa_supplicant \
- file://0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch \
- file://0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch \
- file://0001-Install-wpa_passphrase-when-not-disabled.patch \
- file://0001-PEAP-client-Update-Phase-2-authentication-requiremen.patch \
"
-SRC_URI[sha256sum] = "20df7ae5154b3830355f8ab4269123a87affdea59fe74fe9292a91d0d7e17b2f"
+SRC_URI[sha256sum] = "912ea06f74e30a8e36fbb68064d6cdff218d8d591db0fc5d75dee6c81ac7fc0a"
S = "${WORKDIR}/wpa_supplicant-${PV}"