| Message ID | 20250708012959.77522-1-festevam@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | u-boot: upgrade 2025.04 -> 2025.07 | expand |
On Tue Jul 8, 2025 at 3:29 AM CEST, Fabio Estevam via lists.openembedded.org wrote: > Upgrade to U-Boot 2025.07. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > --- Hi Fabio, Thanks for your patch. It looks like this is breaking selftests on the autobuilder: 2025-07-08 07:43:52,116 - oe-selftest - INFO - fitimage.UBootFitImageTests.test_sign_cascaded_uboot_fit_image (subunit.RemotedTestCase) 2025-07-08 07:43:52,118 - oe-selftest - INFO - ... FAIL ... ERROR: u-boot-1_2025.07-r0 do_compile: oe_runmake failed ... | arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: No such file or directory Both on debian and armhost: https://autobuilder.yoctoproject.org/valkyrie/#/builders/35/builds/1923 https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/2077 Can you have a look at these failures please?
Hi Mathieu, On Tue, Jul 8, 2025 at 9:37 AM Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com> wrote: > > On Tue Jul 8, 2025 at 3:29 AM CEST, Fabio Estevam via lists.openembedded.org wrote: > > Upgrade to U-Boot 2025.07. > > > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > > --- > > Hi Fabio, > > Thanks for your patch. > > It looks like this is breaking selftests on the autobuilder: > > 2025-07-08 07:43:52,116 - oe-selftest - INFO - fitimage.UBootFitImageTests.test_sign_cascaded_uboot_fit_image (subunit.RemotedTestCase) > 2025-07-08 07:43:52,118 - oe-selftest - INFO - ... FAIL > ... > ERROR: u-boot-1_2025.07-r0 do_compile: oe_runmake failed > ... > | arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: No such file or directory > > > Both on debian and armhost: > > https://autobuilder.yoctoproject.org/valkyrie/#/builders/35/builds/1923 > https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/2077 > > Can you have a look at these failures please? Thanks for the report. I am adding some folks on CC in case they have some ideas.
On Tue, Jul 08, 2025 at 02:04:15PM -0300, Fabio Estevam wrote: > Hi Mathieu, > > On Tue, Jul 8, 2025 at 9:37 AM Mathieu Dubois-Briand > <mathieu.dubois-briand@bootlin.com> wrote: > > > > On Tue Jul 8, 2025 at 3:29 AM CEST, Fabio Estevam via lists.openembedded.org wrote: > > > Upgrade to U-Boot 2025.07. > > > > > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > > > --- > > > > Hi Fabio, > > > > Thanks for your patch. > > > > It looks like this is breaking selftests on the autobuilder: > > > > 2025-07-08 07:43:52,116 - oe-selftest - INFO - fitimage.UBootFitImageTests.test_sign_cascaded_uboot_fit_image (subunit.RemotedTestCase) > > 2025-07-08 07:43:52,118 - oe-selftest - INFO - ... FAIL > > ... > > ERROR: u-boot-1_2025.07-r0 do_compile: oe_runmake failed > > ... > > | arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: No such file or directory > > > > > > Both on debian and armhost: > > > > https://autobuilder.yoctoproject.org/valkyrie/#/builders/35/builds/1923 > > https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/2077 > > > > Can you have a look at these failures please? > > Thanks for the report. > > I am adding some folks on CC in case they have some ideas. Interesting. How can we trigger that outside of the autobuilder?
On Tue Jul 8, 2025 at 7:57 PM CEST, Tom Rini wrote: > On Tue, Jul 08, 2025 at 02:04:15PM -0300, Fabio Estevam wrote: >> Hi Mathieu, >> >> On Tue, Jul 8, 2025 at 9:37 AM Mathieu Dubois-Briand >> <mathieu.dubois-briand@bootlin.com> wrote: >> > >> > On Tue Jul 8, 2025 at 3:29 AM CEST, Fabio Estevam via lists.openembedded.org wrote: >> > > Upgrade to U-Boot 2025.07. >> > > >> > > Signed-off-by: Fabio Estevam <festevam@gmail.com> >> > > --- >> > >> > Hi Fabio, >> > >> > Thanks for your patch. >> > >> > It looks like this is breaking selftests on the autobuilder: >> > >> > 2025-07-08 07:43:52,116 - oe-selftest - INFO - fitimage.UBootFitImageTests.test_sign_cascaded_uboot_fit_image (subunit.RemotedTestCase) >> > 2025-07-08 07:43:52,118 - oe-selftest - INFO - ... FAIL >> > ... >> > ERROR: u-boot-1_2025.07-r0 do_compile: oe_runmake failed >> > ... >> > | arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: No such file or directory >> > >> > >> > Both on debian and armhost: >> > >> > https://autobuilder.yoctoproject.org/valkyrie/#/builders/35/builds/1923 >> > https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/2077 >> > >> > Can you have a look at these failures please? >> >> Thanks for the report. >> >> I am adding some folks on CC in case they have some ideas. > > Interesting. How can we trigger that outside of the autobuilder? Hi, It's not so easy to reproduce, as it looks like it is somehow linked with the host environment: this have been failing on debian workers but not on the fedora ones. So basic instructions are below, but this was not enough to reproduce it in the ubuntu 24.4 docker I've been using so far. git clone git://git.yoctoproject.org/poky-ci-archive -b autobuilder.yoctoproject.org/valkyrie/a-full-1972 cd poky-ci-archive . oe-init-build-env Add following lines in conf/local.conf (I bet only the last one is really needed, but let's try to be as close as possible as the autobuilder configuration): MACHINE = "qemux86-64" DISTRO = "poky" SDKMACHINE = "x86_64" PACKAGE_CLASSES = "package_rpm" RPM_GPG_SIGN_CHUNK = '1' IMAGE_INSTALL:append = ' ssh-pregen-hostkeys' SANITY_TESTED_DISTROS = '' Add poky-ci-archive/meta-selftest in conf/bblayers.conf. And finally, run the tests: oe-selftest -r fitimage.UBootFitImageTests.test_sign_cascaded_uboot_fit_image oe-selftest -r fitimage.UBootFitImageTests.test_sign_standalone_uboot_atf_tee_fit_image
On Tue, 2025-07-08 at 11:57 -0600, Tom Rini wrote: > On Tue, Jul 08, 2025 at 02:04:15PM -0300, Fabio Estevam wrote: > > Hi Mathieu, > > > > On Tue, Jul 8, 2025 at 9:37 AM Mathieu Dubois-Briand > > <mathieu.dubois-briand@bootlin.com> wrote: > > > > > > On Tue Jul 8, 2025 at 3:29 AM CEST, Fabio Estevam via > > > lists.openembedded.org wrote: > > > > Upgrade to U-Boot 2025.07. > > > > > > > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > > > > --- > > > > > > Hi Fabio, > > > > > > Thanks for your patch. > > > > > > It looks like this is breaking selftests on the autobuilder: > > > > > > 2025-07-08 07:43:52,116 - oe-selftest - INFO - > > > fitimage.UBootFitImageTests.test_sign_cascaded_uboot_fit_image > > > (subunit.RemotedTestCase) > > > 2025-07-08 07:43:52,118 - oe-selftest - INFO - ... FAIL > > > ... > > > ERROR: u-boot-1_2025.07-r0 do_compile: oe_runmake failed > > > ... > > > > arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: > > > > No such file or directory > > > > > > > > > Both on debian and armhost: > > > > > > https://autobuilder.yoctoproject.org/valkyrie/#/builders/35/builds/1923 > > > https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/2077 > > > > > > Can you have a look at these failures please? > > > > Thanks for the report. > > > > I am adding some folks on CC in case they have some ideas. > > Interesting. How can we trigger that outside of the autobuilder? > Probably this is not related to the fit image tests as such. It's probably just u-boot it self which does no longer compile. The test generates a local.conf file like this: https://git.yoctoproject.org/poky/tree/meta/lib/oeqa/selftest/cases/fitimage.py#n1414 and then it runs: bitbake u-boot Running the test as it runs on the AB should be possible like this: # Start with a clean, default local.conf git clone https://git.yoctoproject.org/poky cd poky . oe-init-build-env cat << EOF >> $BUILDDIR/conf/local.conf # oe-selftest requies that SANITY_TESTED_DISTROS = "" # Use Yocto's public sstate-cache BB_HASHSERVE_UPSTREAM = 'wss://hashserv.yoctoproject.org/ws' SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/all/PATH;downloadfilename=PATH" EOF oe-selftest -v -K -r fitimage.UBootFitImageTests.test_uboot_fit_image The detailed log file is here: $BUILDDIR/tmp/log/oe-selftest-results.log Adrian
diff --git a/meta/recipes-bsp/u-boot/u-boot-common.inc b/meta/recipes-bsp/u-boot/u-boot-common.inc index 617f5a60bb88..d087525edfea 100644 --- a/meta/recipes-bsp/u-boot/u-boot-common.inc +++ b/meta/recipes-bsp/u-boot/u-boot-common.inc @@ -12,7 +12,7 @@ PE = "1" # We use the revision in order to avoid having to fetch it from the # repo during parse -SRCREV = "34820924edbc4ec7803eb89d9852f4b870fa760a" +SRCREV = "e37de002fac3895e8d0b60ae2015e17bb33e2b5b" SRC_URI = "git://source.denx.de/u-boot/u-boot.git;protocol=https;branch=master;tag=v${PV}" diff --git a/meta/recipes-bsp/u-boot/u-boot-tools_2025.04.bb b/meta/recipes-bsp/u-boot/u-boot-tools_2025.07.bb similarity index 100% rename from meta/recipes-bsp/u-boot/u-boot-tools_2025.04.bb rename to meta/recipes-bsp/u-boot/u-boot-tools_2025.07.bb diff --git a/meta/recipes-bsp/u-boot/u-boot_2025.04.bb b/meta/recipes-bsp/u-boot/u-boot_2025.07.bb similarity index 100% rename from meta/recipes-bsp/u-boot/u-boot_2025.04.bb rename to meta/recipes-bsp/u-boot/u-boot_2025.07.bb
Upgrade to U-Boot 2025.07. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- meta/recipes-bsp/u-boot/u-boot-common.inc | 2 +- .../u-boot/{u-boot-tools_2025.04.bb => u-boot-tools_2025.07.bb} | 0 .../recipes-bsp/u-boot/{u-boot_2025.04.bb => u-boot_2025.07.bb} | 0 3 files changed, 1 insertion(+), 1 deletion(-) rename meta/recipes-bsp/u-boot/{u-boot-tools_2025.04.bb => u-boot-tools_2025.07.bb} (100%) rename meta/recipes-bsp/u-boot/{u-boot_2025.04.bb => u-boot_2025.07.bb} (100%)