diff mbox series

[v6,4/4] oeqa selftest uboot.py: add qemu KVM test case

Message ID 20250603122939.1027947-4-mikko.rapeli@linaro.org
State Accepted, archived
Commit dce900b029607d12ad55de35741f245beb409b47
Headers show
Series [v6,1/4] u-boot: disable CONFIG_BLOBLIST on genericarm64 and qemuarm64 | expand

Commit Message

Mikko Rapeli June 3, 2025, 12:29 p.m. UTC 
Add a test case to boot target system via u-boot
using qemu with KVM. This was broken recently
and workaround proposed to u-boot. Test case
works with genericarm64 and qemuarm64 target machines
compiled and tested on aarch64 build host with KVM
support.

Test execution time with full sstate cache is
around 170 seconds. qemu boot itself takes just
a few seconds to full userspace.

Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
---
 meta/lib/oeqa/selftest/cases/uboot.py | 59 ++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 2 deletions(-)

v6: removed override of QB_OPT_APPEND to disable USB in qemu,
    instead u-boot has disabled USB support
diff mbox series

Patch

diff --git a/meta/lib/oeqa/selftest/cases/uboot.py b/meta/lib/oeqa/selftest/cases/uboot.py
index 96da4efb0695..980ea327f0cc 100644
--- a/meta/lib/oeqa/selftest/cases/uboot.py
+++ b/meta/lib/oeqa/selftest/cases/uboot.py
@@ -6,8 +6,8 @@ 
 #
 
 from oeqa.selftest.case import OESelftestTestCase
-from oeqa.utils.commands import bitbake, runqemu
-from oeqa.core.decorator.data import skipIfNotArch
+from oeqa.utils.commands import bitbake, runqemu, get_bb_var, get_bb_vars, runCmd
+from oeqa.core.decorator.data import skipIfNotArch, skipIfNotBuildArch
 from oeqa.core.decorator import OETestTag
 
 uboot_boot_patterns = {
@@ -41,3 +41,58 @@  QEMU_USE_KVM = "False"
             status, output = qemu.run_serial(cmd)
             self.assertEqual(status, 1, msg=output)
             self.assertTrue("U-Boot" in output, msg=output)
+
+    @skipIfNotArch(['aarch64'])
+    @skipIfNotBuildArch(['aarch64'])
+    @OETestTag("runqemu")
+    def test_boot_uboot_kvm_to_full_target(self):
+        """
+        Tests building u-boot and booting it with QEMU and KVM.
+        Requires working KVM on build host. See "kvm-ok" output.
+        """
+
+        runCmd("kvm-ok")
+
+        image = "core-image-minimal"
+        vars = get_bb_vars(['HOST_ARCH', 'BUILD_ARCH'], image)
+        host_arch = vars['HOST_ARCH']
+        build_arch = vars['BUILD_ARCH']
+
+        self.assertEqual(host_arch, build_arch, 'HOST_ARCH %s and BUILD_ARCH %s must match for KVM' % (host_arch, build_arch))
+
+        self.write_config("""
+QEMU_USE_KVM = "1"
+
+# Using u-boot in EFI mode, need ESP partition for grub/systemd-boot/kernel etc
+IMAGE_FSTYPES:pn-core-image-minimal:append = " wic"
+
+# easiest to follow genericarm64 setup with wks file, initrd and EFI loader
+INITRAMFS_IMAGE = "core-image-initramfs-boot"
+EFI_PROVIDER = "${@bb.utils.contains("DISTRO_FEATURES", "systemd", "systemd-boot", "grub-efi", d)}"
+WKS_FILE = "genericarm64.wks.in"
+
+# use wic image with ESP for u-boot, not ext4
+QB_DEFAULT_FSTYPE = "wic"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+QB_DEFAULT_BIOS = "u-boot.bin"
+
+# let u-boot or EFI loader load kernel from ESP
+QB_DEFAULT_KERNEL = "none"
+
+# virt pci, not scsi because support not in u-boot to find ESP
+QB_DRIVE_TYPE = "/dev/vd"
+""")
+        bitbake("virtual/bootloader %s" % image)
+
+        runqemu_params = get_bb_var('TEST_RUNQEMUPARAMS', image) or ""
+        with runqemu(image, ssh=False, runqemuparams='nographic kvm %s' % runqemu_params) as qemu:
+
+            # boot to target and login worked, should have been fast with kvm
+            cmd = "dmesg"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(status, 1, msg=output)
+            # Machine is qemu
+            self.assertTrue("Machine model: linux,dummy-virt" in output, msg=output)
+            # with KVM enabled
+            self.assertTrue("KVM: hypervisor services detected" in output, msg=output)