diff mbox series

[v3,08/12] oeqa selftest uki.py: add tests for uki.bbclass

Message ID 20240919143706.6074-9-mikko.rapeli@linaro.org
State New
Headers show
Series systemd uki support | expand

Commit Message

Mikko Rapeli Sept. 19, 2024, 2:37 p.m. UTC 
Tests builds and boots qemu into uki binary with systemd and sysvinit.
Due to depedency to x86 specific ovmf UEFI firmware, tests
are specific to x86 curently. UEFI firmware for ARM can be generated
via qemuarm64-secureboot machine in meta-arm and similar tests
on qemu will pass.

Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
---
 meta/lib/oeqa/selftest/cases/uki.py           | 138 ++++++++++++++++++
 .../wic/canned-wks/efi-uki-bootdisk.wks.in    |   3 +
 2 files changed, 141 insertions(+)
 create mode 100644 meta/lib/oeqa/selftest/cases/uki.py
 create mode 100644 scripts/lib/wic/canned-wks/efi-uki-bootdisk.wks.in
diff mbox series

Patch

diff --git a/meta/lib/oeqa/selftest/cases/uki.py b/meta/lib/oeqa/selftest/cases/uki.py
new file mode 100644
index 0000000000..a2d2ad6efc
--- /dev/null
+++ b/meta/lib/oeqa/selftest/cases/uki.py
@@ -0,0 +1,138 @@ 
+# Based on runqemu.py test file
+#
+# Copyright (c) 2017 Wind River Systems, Inc.
+#
+# SPDX-License-Identifier: MIT
+#
+
+from oeqa.selftest.case import OESelftestTestCase
+from oeqa.utils.commands import bitbake, runqemu, get_bb_var
+from oeqa.core.decorator.data import skipIfNotArch
+from oeqa.core.decorator import OETestTag
+import oe.types
+
+class UkiTest(OESelftestTestCase):
+    """Boot Unified Kernel Image (UKI) generated with uki.bbclass on UEFI firmware (omvf/edk2)"""
+
+    @skipIfNotArch(['i586', 'i686', 'x86_64'])
+    @OETestTag("runqemu")
+    def test_uki_boot_systemd(self):
+        """Build and boot into UEFI firmware (omvf/edk2), systemd-boot, initrd without systemd, rootfs with systemd"""
+        image = "core-image-minimal"
+        runqemu_params = get_bb_var('TEST_RUNQEMUPARAMS', image)
+        cmd = "runqemu %s nographic serial wic ovmf" % (runqemu_params)
+        if oe.types.qemu_use_kvm(self.td.get('QEMU_USE_KVM', 0), self.td["TARGET_ARCH"]):
+            cmd += " kvm"
+
+        self.write_config("""
+# efi firmware must load systemd-boot, not grub
+EFI_PROVIDER = "systemd-boot"
+
+# image format must be wic, needs esp partition for firmware etc
+IMAGE_FSTYPES:pn-%s:append = " wic"
+WKS_FILE = "efi-uki-bootdisk.wks.in"
+
+# efi, uki and systemd features must be enabled
+INIT_MANAGER = "systemd"
+MACHINE_FEATURES:append = " efi"
+DISTRO_FEATURES:append = " uki"
+DISTRO_FEATURES:append = " systemd"
+DISTRO_FEATURES_NATIVE:append = " systemd"
+IMAGE_CLASSES:append:pn-core-image-minimal = " uki"
+
+# uki embeds also an initrd
+INITRAMFS_IMAGE = "core-image-minimal-initramfs"
+
+# runqemu must not load kernel separately, it's in the uki
+QB_KERNEL_ROOT = ""
+QB_DEFAULT_KERNEL = "none"
+
+# boot command line provided via uki, not via bootloader
+UKI_CMDLINE = "rootwait root=LABEL=root console=${KERNEL_CONSOLE}"
+""" % (image))
+
+        uki_filename = get_bb_var('UKI_FILENAME', image)
+
+        bitbake(image + " ovmf")
+        with runqemu(image, ssh=False, launch_cmd=cmd) as qemu:
+            self.assertTrue(qemu.runner.logged, "Failed: %s" % cmd)
+
+            # Verify from efivars that firmware was:
+            # x86_64, qemux86_64 = edk2
+            # arm,  = u-boot
+            cmd = "echo $( cat /sys/firmware/efi/efivars/LoaderFirmwareInfo-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep 'EDK II'"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+            # Check that systemd-boot was the loader
+            cmd = "echo $( cat /sys/firmware/efi/efivars/LoaderInfo-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep systemd-boot"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+            # Check that systemd-stub was used
+            cmd = "echo $( cat /sys/firmware/efi/efivars/StubInfo-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep systemd-stub"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+            # Check that the compiled uki file was booted into
+            cmd = "echo $( cat /sys/firmware/efi/efivars/LoaderEntrySelected-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep '%s'" % (uki_filename)
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+    @skipIfNotArch(['i586', 'i686', 'x86_64'])
+    @OETestTag("runqemu")
+    def test_uki_sysvinit(self):
+        """Build and boot into UEFI firmware (omvf/edk2), systemd-boot, initrd with sysvinit, rootfs with sysvinit"""
+        config = """
+# efi firmware must load systemd-boot, not grub
+EFI_PROVIDER = "systemd-boot"
+
+# image format must be wic, needs esp partition for firmware etc
+IMAGE_FSTYPES:pn-core-image-base:append = " wic"
+WKS_FILE = "efi-uki-bootdisk.wks.in"
+
+# efi, uki and systemd features must be enabled
+MACHINE_FEATURES:append = " efi"
+DISTRO_FEATURES_NATIVE:append = " systemd"
+IMAGE_CLASSES:append:pn-core-image-base = " uki"
+
+# uki embeds also an initrd, no systemd or udev
+INITRAMFS_IMAGE = "core-image-initramfs-boot"
+
+# runqemu must not load kernel separately, it's in the uki
+QB_KERNEL_ROOT = ""
+QB_DEFAULT_KERNEL = "none"
+
+# boot command line provided via uki, not via bootloader
+UKI_CMDLINE = "rootwait root=LABEL=root console=${KERNEL_CONSOLE}"
+
+"""
+        self.append_config(config)
+        bitbake('core-image-base ovmf')
+        runqemu_params = get_bb_var('TEST_RUNQEMUPARAMS', 'core-image-base')
+        uki_filename = get_bb_var('UKI_FILENAME', 'core-image-base')
+        self.remove_config(config)
+
+        with runqemu('core-image-base', ssh=False,
+                     runqemuparams='%s slirp nographic ovmf' % (runqemu_params), image_fstype='wic') as qemu:
+            # Verify from efivars that firmware was:
+            # x86_64, qemux86_64 = edk2
+            # arm,  = u-boot
+            cmd = "echo $( cat /sys/firmware/efi/efivars/LoaderFirmwareInfo-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep 'EDK II'"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+            # Check that systemd-boot was the loader
+            cmd = "echo $( cat /sys/firmware/efi/efivars/LoaderInfo-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep systemd-boot"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+            # Check that systemd-stub was used
+            cmd = "echo $( cat /sys/firmware/efi/efivars/StubInfo-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep systemd-stub"
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
+
+            # Check that the compiled uki file was booted into
+            cmd = "echo $( cat /sys/firmware/efi/efivars/LoaderEntrySelected-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f ) | grep '%s'" % (uki_filename)
+            status, output = qemu.run_serial(cmd)
+            self.assertEqual(1, status, 'Failed to run command "%s": %s' % (cmd, output))
diff --git a/scripts/lib/wic/canned-wks/efi-uki-bootdisk.wks.in b/scripts/lib/wic/canned-wks/efi-uki-bootdisk.wks.in
new file mode 100644
index 0000000000..1ea9c8a845
--- /dev/null
+++ b/scripts/lib/wic/canned-wks/efi-uki-bootdisk.wks.in
@@ -0,0 +1,3 @@ 
+bootloader --ptable gpt --timeout=5
+part /boot --source bootimg-efi --sourceparams="loader=${EFI_PROVIDER}" --label boot --active --align 1024 --use-uuid --part-name="ESP" --part-type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B --fixed-size 512M
+part / --source rootfs --fstype=ext4 --label root --align 1024 --exclude-path boot/