@@ -86,8 +86,15 @@ Supported distributions
Compared to the previous releases, running BitBake is supported on new
GNU/Linux distributions:
+- Ubuntu 24.10
+- Fedora 40
+- OpenSUSE Leap 15.5
+- OpenSUSE Leap 15.6
+
On the other hand, some earlier distributions are no longer supported:
+- Ubuntu 23.04
+
See :ref:`all supported distributions <system-requirements-supported-distros>`.
.. _migration-5.1-go-changes:
@@ -95,20 +102,35 @@ See :ref:`all supported distributions <system-requirements-supported-distros>`.
Go language changes
~~~~~~~~~~~~~~~~~~~
+- After dropping the custom :ref:`ref-tasks-unpack` from the
+ :ref:`ref-classes-go` class, go recipes should now add
+ ``destsuffix=${GO_SRCURI_DESTSUFFIX}`` to their :term:`SRC_URI` to extract
+ them in the appropriate path. An example would be::
+
+ SRC_URI = "git://go.googlesource.com/example;branch=master;protocol=https;destsuffix=${GO_SRCURI_DESTSUFFIX}"
+
+- Go modules are no longer compiled with ``--linkmode=external``.
+
.. _migration-5.1-systemd-changes:
systemd changes
~~~~~~~~~~~~~~~
+- New :term:`PACKAGECONFIG` value ``bpf-framework`` used to pre-compile eBPFs
+ that are required for the systemd.resource-control features
+ ``RestrictFileSystems`` and ``RestrictNetworkInterfaces``.
+
.. _migration-5.1-recipe-changes:
Recipe changes
~~~~~~~~~~~~~~
-.. _migration-5.1-deprecated-variables:
+- ``gobject-introspection``: the ``giscanner`` utility is now shipped as a
+ separate package in ``gobject-introspection-tools``.
+
+- ``perf`` no longer uses ``libnewt`` for compiling its TUI.
-Deprecated variables
-~~~~~~~~~~~~~~~~~~~~
+- ``openssl``: do not build the test suite unless ptests are enabled.
.. _migration-5.1-removed-variables:
@@ -117,6 +139,9 @@ Removed variables
The following variables have been removed:
+- ``TCLIBCAPPEND`` is now removed as sharing :term:`TMPDIR` for multiple libc
+ providers has been supported for years.
+
.. _migration-5.1-removed-recipes:
Removed recipes
@@ -124,19 +149,35 @@ Removed recipes
The following recipes have been removed in this release:
+- ``liba52``: superseded by ``ffmpeg``
+- ``libomxil``: recipe removed as its only consumer, the gstreamer omx plugin,
+ was removed and has not been developed for several years
+- ``libnewt``: moved to meta-oe
+- ``mpeg2dec``: inactive for 10 years and superseded by ``ffmpeg``
+- ``pytest-runner``: moved to meta-python
+- ``python3-importlib-metadata``: moved to meta-python
+- ``python3-pathlib2``: moved to meta-python
+- ``python3-py``: moved to meta-python
+- ``python3-rfc3986-validator``: moved to meta-python
+- ``python3-toml``: moved to meta-python
+- ``python3-tomli``: moved to meta-python
+- ``usbinit``: recipe was poorly named as it is a gadget Ethernet driver.
+ Gadget Ethernet is of questionable use now and usbinit isn't referenced/used
+ anywhere within OE-Core.
+
+
.. _migration-5.1-removed-classes:
Removed classes
~~~~~~~~~~~~~~~
-No classes have been removed in this release.
+The following classes have been removed in this release:
-.. _migration-5.1-qemu-changes:
+- ``siteconfig``: removed as it was only used by ``ncurses`` and ``zlib`` and
+ adding minimal added-value for a considerable amount of added runtime.
-QEMU changes
-~~~~~~~~~~~~
-.. _migration-5.1-misc-changes:
+.. _migration-5.1-qemu-changes:
Miscellaneous changes
~~~~~~~~~~~~~~~~~~~~~
@@ -155,3 +196,9 @@ Miscellaneous changes
Environment variables containing relative paths from tested build directory
to outside of the original build directory may need to be updated as they
won't be changed by `oe-selftest`.
+
+- Several sanity checks from the :ref:`ref-classes-insane` class, such as
+ ``buildpaths``, have been promoted to errors instead of warnings.
+
+- The ``license-incompatible`` :term:`ERROR_QA` sanity check was renamed to
+ ``license-exception``.
@@ -6,7 +6,8 @@ Release notes for 5.1 (styhead)
New Features / Enhancements in 5.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Linux kernel 6.X, gcc 14.X, glibc 2.X, LLVM 18.X, and over XXX other recipe upgrades
+- Linux kernel 6.10, gcc 14.2, glibc 2.40, LLVM 18.1.18, and over 300 other
+ recipe upgrades.
- New variables:
@@ -22,7 +23,7 @@ New Features / Enhancements in 5.1
- :term:`UNPACKDIR`: allow change of the :ref:`ref-tasks-unpack` task
directory.
-- Architecture-specific enhancements:
+- Kernel-related changes:
- The default kernel is the current stable (6.10), and there is also support
for the latest long-term release (6.6).
@@ -35,28 +36,89 @@ New Features / Enhancements in 5.1
- `xcb-util-errors <http://xcb.freedesktop.org/XcbUtil/>`__: gives human
readable names to error codes and event codes
-- QEMU / ``runqemu`` enhancements:
+- QEMU / ``runqemu`` changes:
- runqemu: ``QB_DRIVE_TYPE`` now support for sd card (``/dev/mmcblk``)
-- Rust improvements:
+ - Trigger ``write_qemuboot_conf`` task on changes of kernel image realpath
+ (:term:`KERNEL_IMAGE_NAME`).
-- SDK-related improvements:
+- Go changes:
- - included ``nativesdk-python3-pip`` in buildtools.
+ - New Go module fetcher (``gomod://``) for downloading module dependencies
+ to the module cache from a module proxy.
-- Testing:
+ - New Go module fetcher (``gomodgit://``) for downloading module
+ dependencies to the module cache directly from a git repository.
- - oeqa/selftest: Only rewrite envvars paths that absolutely point to builddir
+ - The old 1.4 Go bootstrap written in C has been dropped. The default
+ Go bootstrap provider is now ``go-binary-native`` only.
+
+- Rust changes:
+
+ - Cargo dependencies specified as git repositories now also have their git
+ submodules checked out.
+
+ - Rust is now built with its default set of tools instead of just
+ ``rust-demangler``.
+
+- wic Image Creator changes:
+
+ - Add the ``truncate`` utility in :term:`HOSTTOOLS`, needed by some wic
+ commands.
+
+ - The ``get_boot_files`` function is no longer part of the
+ ``bootimg-partition`` plugin and is part of the common ``bootfiles.py``
+ library.
+
+- SDK-related changes:
- - Enable ptests for ``python3-cffi``, ``python3-idna``, ``python3-libarchive-c``,
- ``python3-mako``, ``python3-packaging``, ``python3-uritools`` and ``python3-rpds-py``.
- Included ``nativesdk-python3-pip`` in :term:`buildtools` by default.
+ - :ref:`ref-classes-nativesdk` now have :ref:`ref-tasks-package_qa` run when
+ calling :ref:`ref-tasks-populate_sdk`.
+
+ - A new 7zip archive type can be used to create the SDK by setting
+ :term:`SDK_ARCHIVE_TYPE` to ``7zip``.
+
+ - The :ref:`ref-classes-toolchain-scripts` class now exports the target
+ endianness and wordsize in environment variables ``OECORE_TARGET_BITS``
+ and ``OECORE_TARGET_ENDIAN``.
+
+- Testing-related changes:
+
+ - oeqa/selftest: Only rewrite envvars paths that absolutely point to
+ :term:`BUILDDIR`.
+
+ - oeqa/manual: remove obsolete CROPS and Eclipse manually testing scripts
+
- Enable ptests for ``python3-cffi``, ``python3-idna``,
``python3-libarchive-c``, ``python3-mako``, ``python3-packaging``,
``python3-uritools`` and ``python3-rpds-py``.
+ - Running tests on target with :ref:`ref-classes-testimage` can now be done
+ over a serial connection.
+
+ - Artifact collection when using the :ref:`ref-classes-testimage` class is
+ now optional and allowed by making :term:`TESTIMAGE_FAILED_QA_ARTIFACTS`
+ empty.
+
+ - Artifacts from ``oeqa`` post-actions are now retrieved as whole archives
+ instead of individual copies. The archive is left uncompressed on the
+ host.
+
+ - A test for the ``minidebuginfo`` feature of :term:`DISTRO_FEATURES` is now
+ part of the test suite.
+
+ - A test for building a kernel module was added to the SDK test suite.
+
+ - oeqa/selftest: run test serially if neither the ``testtools`` or
+ ``subunit`` Python modules have been found.
+
+ - Artifact collection and test result collection are now separated and
+ artifact collection can be controlled with the ``OEQA_ARTEFACT_DIR``
+ variable.
+
- Utility script changes:
- New ``cve-json-to-text`` script that converts the ``cve-check`` result
@@ -75,11 +137,13 @@ New Features / Enhancements in 5.1
- ``resulttool``: support test report generation in JUnit XML format.
+ - Remove ``install-buildtools`` "test installation" step harmless error
+ messages.
-- BitBake improvements:
+ - ``bitbake-layers``: add a new subcommand ``show-machines`` to list the
+ machines available in the currently configured layers.
- - New go module fetcher (``gomod://``) for downloading module dependencies to the
- module cache from a module proxy.
+- BitBake changes:
- Fetcher for Rust crates: added a check for latest upstream version.
@@ -106,19 +170,107 @@ New Features / Enhancements in 5.1
var1="$(cmd1 ...)"
-- devtool improvements:
+ - Function code of pylib functions are now taken into account when computing
+ taskhashes.
+
+ - Fix ``_test_devtool_add_git_url`` test
+
+ - Hashserv: add a batch stream API that reduces the round trip latency on the
+ server.
+
+ - The :ref:`ref-classes-prserv` class now uses a shared sqlite3 database to
+ allow multiple processes to access the database.
+
+ - The Python codeparser now skips the checksumming of external Python
+ modules imported with ``from module import something``.
+
+ - Enable batching of ``unihash`` queries to reduce the effect of latency
+ when making multiple queries to the server.
+
+ - Parser: improve cache invalidation reliability by using the mtime's
+ nanoseconds, inode number and size of files.
+
+ - When using the syntax ``addtask do_XXX before YYY after ZZZ``, bitbake now
+ ensures that ``YYY`` and ``ZZZ`` are prefixed with ``do_``, to avoid
+ unexpected failures.
+
+- ``devtool`` changes:
+
+ - Fix ``_test_devtool_add_git_url`` test
- - Fix ``_test_devtool_add_git_url`` test
+ - ``update-recipe``, ``finish``: fix error when calling on another layer and
+ having a localfile.
-- recipetool improvements:
+ - ``devtool check-upgrade-status`` now groups recipes when they need to be
+ upgraded together.
- Packaging changes:
-- Security improvements:
+ - When processing ``pkgconfig``'s ``pc`` files, also process
+ "Requires.private" in addition to "Requires". This fixes a broken
+ dependency list for IPKs and avoids installing unecessary recommended
+ additional packages (and save disk usage).
+
+ - Package management: make the extraction of IPK packages not depend on
+ ``zst`` compression, as it can be changed with :term:`OPKGBUILDCMD`.
+
+ - Remove support for ``DIRFILES`` of :ref:`ref-classes-package_rpm` as it is
+ rpm-specific and untested.
+
+ - Bump ``abi_version`` and ``package`` versions after recent ``pkgconfig``
+ changes.
+
+- Security changes:
+
+ - The ``busybox`` default configuration now disables internal TLS code to
+ use the ``openssl`` backend instead, for a more secure initial set of
+ settings.
+
+ - Limit ssh host keys pre-generation to qemu machines by default, for
+ security purposes.
+
+- LLVM related changes:
+
+ - Enable ``libllvm`` in :term:`PACKAGECONFIG` for native builds.
+
+ - Fetch release tarballs instead of git checkouts to reduce disk usage.
-- Toaster Web UI improvements:
+- :ref:`ref-classes-cve-check` changes:
-- Prominent documentation updates:
+ - The class :ref:`ref-classes-cve-check` now uses a local copy of the NVD
+ database during builds.
+
+ - New statuses can be reported by :ref:`ref-classes-cve-check`:
+
+ - ``fix-file-included``: when a fix file has been included (set automatically)
+ - ``version-not-in-range``: version number NOT in the vulnerable range (set automatically)
+ - ``version-in-range``: version number IS in the vulnerable range (set automatically)
+ - ``unknown``: impossible to conclude if the vulnerability is present or not
+
+ - The TEXT output format was removed to favor the JSON format which offers
+ more features.
+
+ - Allow overriding the default "policies" from
+ ``meta/conf/cve-check-map.conf`` by including it before distro include
+ files in ``meta/conf/bitbake.conf``.
+
+SPDX-related changes:
+
+ - Update the SPDX license set too version 3.24.0, and produce SPDX output in
+ version 3.0 by default, instead of 2.2.
+
+ - New ``create-spdx-3.0`` class to generate SPDX 3.0 output (used by generic
+ class :ref:`ref-classes-create-spdx`). New ``create-spdx-image-3.0``
+ class that is used when generating images and ``create-spdx-sdk-3.0`` for SDK
+ based recipes.
+
+ - New :ref:`ref-classes-nospdx` class that allows recipes to opt out of
+ generating SPDX.
+
+ - Specify the SPDX image purposes for ``tar``, ``cpio`` and ``wic`` images.
+
+ - The :ref:`ref-classes-create-spdx` class now reports for
+ :ref:`ref-classes-multilib*` classes.
- Miscellaneous changes:
@@ -170,34 +322,512 @@ New Features / Enhancements in 5.1
:ref:`ref-classes-insane` errors when :term:`S` or :term:`B` are equal to
:term:`WORKDIR`.
-Known Issues in 5.1
-~~~~~~~~~~~~~~~~~~~
+ - ``picolibc`` can now be used with :term:`TCLIBC` to build with
+ ``picolibc`` as the C library.
+
+ - ``openssh`` now uses ``sd_notify`` patch from upstream instead of custom
+ one, which does not depend on libsystemd and is standalone.
+
+ - ``cmake`` now uses the ``${COREBASE}/scripts/git`` wrapper instead of the
+ host's, which is required during :ref:`ref-tasks-install` to call git
+ while disabling fakeroot, and avoid "dubious ownership" git errors.
+
+ - Default compiler option changes:
+
+ - :term:`BUILD_CFLAGS` now includes the `-pipe` option by default.
+
+ - Remove the ``eliminate-unused-debug-types`` option from
+ the default compiler options since it is now included by default.
+
+ - ``uninative`` updated to 4.6 for glibc 2.40
+
+ - Mark recipe ``meta-ide-support`` as machine specific with
+ :term:`PACKAGE_ARCH`.
+
+ - sstate: Drop intercept functions support which was only used by now
+ removed ``siteconfig`` class.
+
+ - sstate: Drop support for ``SSTATEPOSTINSTFUNC`` variable now that
+ ``postfunc`` is available.
+
+ - openssl: strip the test suite after building, reducing the build tree of
+ 50% after installation.
+
+ - u-boot: Refactor some of the :ref:`ref-tasks-configure` tasks into new
+ functions, making it easier to modify using a bbappend.
+
+ - The ``musl`` recipe now shows an error if used with
+ :ref:`ref-classes-multilib*` enabled (``musl`` does not support multilib).
+
+ - The ``git`` recipe is now configured with default configuration pointing to
+ ``/etc/gitconfig`` for :ref:`ref-classes-native` recipes.
+
+ - The ``apt-native`` recipe, used to compile ``dpkg`` and handle ``deb``
+ packages, was modified to avoid files being overriden by other packages when
+ they share common files. Instead, prompt an error.
+
+ - The :ref:`ref-tasks-savedefconfig` was moved from the u-boot and kernel
+ recipes to the :ref:`ref-classes-cml1` class, so that more kbuild-based
+ recipes can use it.
+
+ - The :ref:`ref-classes-sanity` class now checks if user namespaces are
+ enabled on the host as they are required for network isolation.
+
+ - The recipe ``os-release`` is now part of
+ :term:`SIGGEN_EXCLUDERECIPES_ABISAFE` and does not trigger a rebuild on a
+ change for dependent tasks.
+
+ - In :ref:`ref-classes-kernel-fitimage`, the existence of
+ :term:`EXTERNAL_KERNEL_DEVICETREE` is checked more thoroughly to avoid
+ false positives.
+
+ - rootfs: ensure ``run-postinsts`` is not uninstalled when the
+ *read-only-rootfs-delayed-postinsts* and *read-only-rootfs*
+ :term:`IMAGE_FEATURES` are enabled.
+
+ - Gcc can now use ``libc++`` as its runtime.
+
+ - The variable ``CMDLINE_CONSOLE`` was removed from the
+ :ref:`ref-classes-kernel` class, as it wasn't used anywhere.
+
+ - ``python3``: make ``-core`` depend on ``-compression`` as it needs to
+ import the ``zipfile`` module.
+
+ - The classes :ref:`ref-classes-native` and :ref:`ref-classes-nativesdk` do
+ not override the ``*FLAGS`` variables anymore, allowing users to use the
+ ``+=`` syntax in recipes.
+
+ - The ``multilib_script`` class (part of :ref:`ref-classes-multilib*`)
+ now expands the ``MULTILIB_SCRIPTS`` variable before splitting the
+ scripts, fixing some issues seen when :term:`PACKAGECONFIG` would
+ conditionally modify it.
Recipe License changes in 5.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following corrections have been made to the :term:`LICENSE` values set by recipes:
-- ``dejagnu``: update :term:`LICENSE` to ``GPL-3.0-only``.
-- ``gcr``: update :term:`LICENSE` to ``LGPL-2.0-only``.
-- ``glibc``: update :term:`LICENSE` to ``GPL-2.0-only & LGPL-2.1-or-later``.
-- ``gpgme``: update :term:`LICENSE` for different packages.
-- ``libgcrypt``: add license ``BSD-3-Clause``.
-- ``linux-firmware``: separate license ``Firmware-linaro`` for linaro-license package.
-- ``iw``: update :term:`LICENSE` to ``ISC``.
+- ``ccache``: ``GPL-3.0-or-later`` to ``GPL-3.0-or-later & MIT & BSL-1.0 & ISC`` after adding third-party licenses.
+- ``dejagnu``: update to ``GPL-3.0-only``.
+- ``gcr``: update to ``LGPL-2.0-only``.
+- ``glibc``: update to ``GPL-2.0-only & LGPL-2.1-or-later``.
+- ``gpgme``: update for different packages.
+- ``iw``: update to ``ISC``.
+- ``json-glib``: ``LGPL-2.1-only`` to ``LGPL-2.1-or-later`` after update to 1.10.0.
+- ``libgcrypt``: ``GPL-2.0-or-later & LGPL-2.1-or-later`` to ``GPL-2.0-or-later & LGPL-2.1-or-later & BSD-3-Clause``. Add BSD-3-Clause for poly1305-amd64-avx512.S.
+- ``linux-firmware``: set package :term:`LICENSE` for following firmware packages:
+ - ``cc33xx``
+ - ``ath10k-wcn3990``
+ - ``qcom-adreno-g750``
+ - ``qcom-x1e80100-adreno``
+ - ``wfx``
+ - ``qcom-vpu``
+ - ``qcom-sm8550-audio-tplg``
+ - ``qcom-sm8650-audio-tplg``
+ - ``linaro-license``
+ - ``mali-csffw-arch108``
+- ``lz4``: ``BSD-2-Clause | GPL-2.0-only`` to ``BSD-2-Clause | GPL-2.0-or-later`` after update to 1.10.0.
- ``ppp``: add license ``RSA-MD`` .
-- ``tiff``: update :term:`LICENSE` to ``libtiff``.
-- ``unzip``: update :term:`LICENSE` to ``Info-ZIP``.
-- ``xz``: add :term:`LICENSE` ``PD`` for xz, xz-dev and xz-doc package.
-- ``zip``: update :term:`LICENSE` to ``Info-ZIP``.
-
+- ``python3-docutils``: ``PSF-2.0 & BSD-2-Clause & GPL-3.0-only`` to ``CC0-1.0 & ZPL-2.1 & BSD-2-Clause & GPL-3.0-only``. Add CC0 after update to 0.21.2.
+- ``tiff``: update to ``libtiff``.
+- ``unzip``: update to ``Info-ZIP``.
+- ``util-linux``: Add ``GPL-2.0-only`` after update to 2.40.1 (``GPL-2.0`` changed to ``GPL-2.0-only`` in README.licensing).
+- ``xz``: ``PD`` removed and ``0BSD`` added after update to 5.6.2.
+- ``xz``: add ``PD`` for xz, xz-dev and xz-doc package.
+- ``zip``: update to ``Info-ZIP``.
Security Fixes in 5.1
~~~~~~~~~~~~~~~~~~~~~
+- ``apr``: :cve:`2023-49582`
+- ``busybox``: :cve:`2021-42380`, :cve:`2023-42363`, :cve:`2023-42364`, :cve:`2023-42365`, :cve:`2023-42366`
+- ``cups``: :cve:`2024-35235`
+- ``curl``: :cve:`2024-6197`, :cve:`2024-6874`, :cve:`2024-7264`
+- ``expat``: :cve:`2024-45490`, :cve:`2024-45491`, :cve:`2024-45492`.
+- ``gcc``: :cve:`2023-4039`
+- ``gdk-pixbuf``: :cve:`2022-48622`
+- ``ghostscript``: :cve:`2024-33869`, :cve:`2023-52722`, :cve:`2024-33870`, :cve:`2024-33871`, :cve:`2024-29510`
+- ``git``: :cve:`2024-32002`, :cve:`2024-32004`, :cve:`2024-32020`, :cve:`2024-32021`, :cve:`2024-32465`
+- ``glibc``: :cve:`2024-2961`, :cve:`2024-33599`, :cve:`2024-33600`, :cve:`2024-33601`, :cve:`2024-33602`
+- ``go``: :cve:`2024-24790`
+- ``gtk+3``: :cve:`2024-6655`
+- ``linux-yocto/6.10``: :cve:`2020-16119`
+- ``linux-yocto/6.6``: :cve:`2020-16119`
+- ``llvm``: :cve:`2024-0151`
+- ``ncurses``: :cve:`2023-50495`, :cve:`2023-45918`
+- ``openssh``: :cve:`2024-6387`
+- ``openssl``: :cve:`2024-4603`, :cve:`2024-4741`
+- ``ovmf``: :cve:`2023-45236`, :cve:`2023-45237`, :cve:`2024-25742`
+- ``python3``: :cve:`2024-7592`, :cve:`2024-8088`, :cve:`2024-6232`
+- ``ruby``: :cve:`2024-27282`, :cve:`2024-27281`, :cve:`2024-27280`
+- ``tiff``: :cve:`2024-7006`
+- ``vim``: :cve:`2024-41957`, :cve:`2024-41965`, :cve:`2024-43374`, :cve:`2024-43790`, :cve:`2024-43802`
+- ``wget``: :cve:`2024-38428`
+- ``wpa-supplicant``: :cve:`2024-5290`, :cve:`2023-52160`
+- ``xserver-xorg``: :cve:`2024-31080`, :cve:`2024-31081`, :cve:`2024-31082`, :cve:`2024-31083`
+
Recipe Upgrades in 5.1
~~~~~~~~~~~~~~~~~~~~~~
+- ``acpica`` 20240322 -> 20240827
+- ``adwaita-icon-theme`` 45.0 -> 46.2
+- ``alsa-lib`` 1.2.11 -> 1.2.12
+- ``alsa-plugins`` 1.2.7.1 -> 1.2.12
+- ``alsa-ucm-conf`` 1.2.11 -> 1.2.12
+- ``alsa-utils`` 1.2.11 -> 1.2.12
+- ``asciidoc`` 10.2.0 -> 10.2.1
+- ``at-spi2-core`` 2.50.1 -> 2.52.0
+- ``attr`` 2.5.1 -> 2.5.2
+- ``automake`` 1.16.5 -> 1.17
+- ``base-passwd`` 3.6.3 -> 3.6.4
+- ``bash`` 5.2.21 -> 5.2.32
+- ``bash-completion`` 2.12.0 -> 2.14.0
+- ``bind`` 9.18.28 -> 9.20.1
+- ``binutils`` 2.42 -> 2.43.1
+- ``binutils-cross`` 2.42 -> 2.43.1
+- ``binutils-cross-canadian`` 2.42 -> 2.43.1
+- ``binutils-crosssdk`` 2.42 -> 2.43.1
+- ``bluez5`` 5.72 -> 5.78
+- ``boost`` 1.84.0 -> 1.86.0
+- ``boost-build-native`` 1.84.0 -> 1.86.0
+- ``btrfs-tools`` 6.7.1 -> 6.10.1
+- ``build-appliance-image`` 15.0.0 (bf88a67b4523…) -> 15.0.0 (7cc8bf7af794…)
+- ``ca-certificates`` 20211016 -> 20240203
+- ``cairo`` 1.18.0 -> 1.18.2
+- ``cargo`` 1.75.0 -> 1.79.0
+- ``cargo-c-native`` 0.9.30+cargo-0.77.0 -> 0.10.3+cargo-0.81.0
+- ``ccache`` 4.9.1 -> 4.10.2
+- ``cmake`` 3.28.3 -> 3.30.2
+- ``cmake-native`` 3.28.3 -> 3.30.2
+- ``connman`` 1.42 -> 1.43
+- ``coreutils`` 9.4 -> 9.5
+- ``cracklib`` 2.9.11 -> 2.10.2
+- ``createrepo-c`` 1.0.4 -> 1.1.4
+- ``cross-localedef-native`` 2.39+git -> 2.40+git
+- ``cryptodev-linux`` 1.13+gitX -> 1.14
+- ``cryptodev-module`` 1.13+gitX -> 1.14
+- ``cryptodev-tests`` 1.13+gitX -> 1.14
+- ``curl`` 8.7.1 -> 8.9.1
+- ``debianutils`` 5.16 -> 5.20
+- ``dhcpcd`` 10.0.6 -> 10.0.10
+- ``diffoscope`` 259 -> 277
+- ``dmidecode`` 3.5 -> 3.6
+- ``dnf`` 4.19.0 -> 4.21.1
+- ``dpkg`` 1.22.0 -> 1.22.11
+- ``dropbear`` 2022.83 -> 2024.85
+- ``e2fsprogs`` 1.47.0 -> 1.47.1
+- ``ell`` 0.64 -> 0.68
+- ``enchant2`` 2.6.7 -> 2.8.2
+- ``encodings`` 1.0.7 -> 1.1.0
+- ``epiphany`` 46.0 -> 46.3
+- ``erofs-utils`` 1.7.1 -> 1.8.1
+- ``ethtool`` 6.7 -> 6.10
+- ``ffmpeg`` 6.1.1 -> 7.0.2
+- ``findutils`` 4.9.0 -> 4.10.0
+- ``freetype`` 2.13.2 -> 2.13.3
+- ``fribidi`` 1.0.14 -> 1.0.15
+- ``gcc`` 13.3.0 -> 14.2.0
+- ``gcc-cross`` 13.3.0 -> 14.2.0
+- ``gcc-cross-canadian`` 13.3.0 -> 14.2.0
+- ``gcc-crosssdk`` 13.3.0 -> 14.2.0
+- ``gcc-runtime`` 13.3.0 -> 14.2.0
+- ``gcc-sanitizers`` 13.3.0 -> 14.2.0
+- ``gcc-source`` 13.3.0 -> 14.2.0
+- ``gcr`` 4.2.1 -> 4.3.0
+- ``gdb`` 14.2 -> 15.1
+- ``gdb-cross`` 14.2 -> 15.1
+- ``gdb-cross-canadian`` 14.2 -> 15.1
+- ``gdbm`` 1.23 -> 1.24
+- ``gi-docgen`` 2023.3 -> 2024.1
+- ``git`` 2.44.1 -> 2.46.0
+- ``glib-2.0`` 2.78.6 -> 2.82.1
+- ``glib-networking`` 2.78.1 -> 2.80.0
+- ``glibc`` 2.39+git -> 2.40+git
+- ``glibc-locale`` 2.39+git -> 2.40+git
+- ``glibc-mtrace`` 2.39+git -> 2.40+git
+- ``glibc-scripts`` 2.39+git -> 2.40+git
+- ``glibc-testsuite`` 2.39+git -> 2.40+git
+- ``glibc-y2038-tests`` 2.39+git -> 2.40+git
+- ``glslang`` 1.3.275.0 -> 1.3.290.0
+- ``gnu-config`` 20240101+git -> 20240823+git
+- ``gnu-efi`` 3.0.17 -> 3.0.18
+- ``gnupg`` 2.4.4 -> 2.5.0
+- ``gnutls`` 3.8.4 -> 3.8.6
+- ``go-helloworld`` 0.1 (d9923f6970e9…) -> 0.1 (39e772fc2670…)
+- ``gobject-introspection`` 1.78.1 -> 1.80.1
+- ``gptfdisk`` 1.0.9 -> 1.0.10
+- ``gsettings-desktop-schemas`` 46.0 -> 47.1
+- ``gst-devtools`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-libav`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-plugins-bad`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-plugins-base`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-plugins-good`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-plugins-ugly`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-python`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-rtsp-server`` 1.22.12 -> 1.24.6
+- ``gstreamer1.0-vaapi`` 1.22.12 -> 1.24.6
+- ``gtk+3`` 3.24.41 -> 3.24.43
+- ``gtk-doc`` 1.33.2 -> 1.34.0
+- ``gtk4`` 4.14.1 -> 4.16.0
+- ``harfbuzz`` 8.3.0 -> 9.0.0
+- ``hicolor-icon-theme`` 0.17 -> 0.18
+- ``hwlatdetect`` 2.6 -> 2.7
+- ``icu`` 74-2 -> 75-1
+- ``ifupdown`` 0.8.41 -> 0.8.43
+- ``iproute2`` 6.7.0 -> 6.10.0
+- ``iputils`` 20240117 -> 20240905
+- ``iw`` 6.7 -> 6.9
+- ``json-glib`` 1.8.0 -> 1.10.0
+- ``kea`` 2.4.1 -> 2.6.1
+- ``kexec-tools`` 2.0.28 -> 2.0.29
+- ``kmod`` 31 -> 33
+- ``kmscube`` 0.0.1+git (6ab022fdfcfe…) -> 0.0.1+git (467e86c5cbeb…)
+- ``less`` 643 -> 661
+- ``libadwaita`` 1.5.2 -> 1.6.0
+- ``libassuan`` 2.5.6 -> 3.0.1
+- ``libbsd`` 0.12.1 -> 0.12.2
+- ``libcap`` 2.69 -> 2.70
+- ``libcomps`` 0.1.20 -> 0.1.21
+- ``libdnf`` 0.73.2 -> 0.73.3
+- ``libdrm`` 2.4.120 -> 2.4.123
+- ``libedit`` 20230828-3.1 -> 20240808-3.1
+- ``libevdev`` 1.13.1 -> 1.13.2
+- ``libfontenc`` 1.1.7 -> 1.1.8
+- ``libgcc`` 13.3.0 -> 14.2.0
+- ``libgcc-initial`` 13.3.0 -> 14.2.0
+- ``libgcrypt`` 1.10.3 -> 1.11.0
+- ``libgfortran`` 13.3.0 -> 14.2.0
+- ``libgit2`` 1.7.2 -> 1.8.1
+- ``libgpg-error`` 1.48 -> 1.50
+- ``libical`` 3.0.17 -> 3.0.18
+- ``libinput`` 1.25.0 -> 1.26.1
+- ``libjitterentropy`` 3.4.1 -> 3.5.0
+- ``libksba`` 1.6.6 -> 1.6.7
+- ``libnl`` 3.9.0 -> 3.10.0
+- ``libpam`` 1.5.3 -> 1.6.1
+- ``libpcap`` 1.10.4 -> 1.10.5
+- ``libpciaccess`` 0.18 -> 0.18.1
+- ``libpcre2`` 10.43 -> 10.44
+- ``libpng`` 1.6.42 -> 1.6.43
+- ``libportal`` 0.7.1 -> 0.8.1
+- ``libproxy`` 0.5.4 -> 0.5.8
+- ``librepo`` 1.17.0 -> 1.18.1
+- ``librsvg`` 2.57.1 -> 2.58.2
+- ``libsdl2`` 2.30.1 -> 2.30.7
+- ``libslirp`` 4.7.0 -> 4.8.0
+- ``libsolv`` 0.7.28 -> 0.7.30
+- ``libsoup`` 3.4.4 -> 3.6.0
+- ``libstd-rs`` 1.75.0 -> 1.79.0
+- ``libtirpc`` 1.3.4 -> 1.3.5
+- ``libtool`` 2.4.7 -> 2.5.2
+- ``libtool-cross`` 2.4.7 -> 2.5.2
+- ``libtool-native`` 2.4.7 -> 2.5.2
+- ``libtraceevent`` 1.7.3 -> 1.8.3
+- ``liburcu`` 0.14.0 -> 0.14.1
+- ``liburi-perl`` 5.27 -> 5.28
+- ``libva`` 2.20.0 -> 2.22.0
+- ``libva-initial`` 2.20.0 -> 2.22.0
+- ``libva-utils`` 2.20.1 -> 2.22.0
+- ``libwebp`` 1.3.2 -> 1.4.0
+- ``libwpe`` 1.14.2 -> 1.16.0
+- ``libx11`` 1.8.9 -> 1.8.10
+- ``libxcb`` 1.16 -> 1.17.0
+- ``libxdmcp`` 1.1.4 -> 1.1.5
+- ``libxfont2`` 2.0.6 -> 2.0.7
+- ``libxkbcommon`` 1.6.0 -> 1.7.0
+- ``libxml2`` 2.12.8 -> 2.13.3
+- ``libxmlb`` 0.3.15 -> 0.3.19
+- ``libxmu`` 1.1.4 -> 1.2.1
+- ``libxslt`` 1.1.39 -> 1.1.42
+- ``libxtst`` 1.2.4 -> 1.2.5
+- ``lighttpd`` 1.4.74 -> 1.4.76
+- ``linux-firmware`` 20240312 -> 20240909
+- ``linux-libc-headers`` 6.6 -> 6.10
+- ``linux-yocto`` 6.6.35+git -> 6.6.50+git, 6.10.8+git
+- ``linux-yocto-dev`` 6.9+git -> 6.11+git
+- ``linux-yocto-rt`` 6.6.35+git -> 6.6.50+git, 6.10.8+git
+- ``linux-yocto-tiny`` 6.6.35+git -> 6.6.50+git, 6.10.8+git
+- ``llvm`` 18.1.6 -> 18.1.8
+- ``logrotate`` 3.21.0 -> 3.22.0
+- ``ltp`` 20240129 -> 20240524
+- ``lttng-modules`` 2.13.12 -> 2.13.14
+- ``lttng-tools`` 2.13.13 -> 2.13.14
+- ``lua`` 5.4.6 -> 5.4.7
+- ``lz4`` 1.9.4 -> 1.10.0
+- ``lzip`` 1.24 -> 1.24.1
+- ``man-db`` 2.12.0 -> 2.12.1
+- ``man-pages`` 6.06 -> 6.9.1
+- ``mc`` 4.8.31 -> 4.8.32
+- ``mdadm`` 4.2 -> 4.3
+- ``meson`` 1.3.1 -> 1.5.1
+- ``mkfontscale`` 1.2.2 -> 1.2.3
+- ``mmc-utils`` 0.1+git (b5ca140312d2…) -> 0.1+git (123fd8b2ac39…)
+- ``mpg123`` 1.32.6 -> 1.32.7
+- ``msmtp`` 1.8.25 -> 1.8.26
+- ``mtd-utils`` 2.1.6 -> 2.2.0
+- ``mtdev`` 1.1.6 -> 1.1.7
+- ``mtools`` 4.0.43 -> 4.0.44
+- ``musl`` 1.2.4+git -> 1.2.5+git
+- ``nativesdk-libtool`` 2.4.7 -> 2.5.2
+- ``ncurses`` 6.4 -> 6.5
+- ``nettle`` 3.9.1 -> 3.10
+- ``nfs-utils`` 2.6.4 -> 2.7.1
+- ``nghttp2`` 1.61.0 -> 1.63.0
+- ``ninja`` 1.11.1 -> 1.12.1
+- ``npth`` 1.6 -> 1.7
+- ``ofono`` 2.4 -> 2.10
+- ``opensbi`` 1.4 -> 1.5.1
+- ``openssh`` 9.6p1 -> 9.8p1
+- ``openssl`` 3.2.3 -> 3.3.1
+- ``opkg`` 0.6.3 -> 0.7.0
+- ``opkg-utils`` 0.6.3 -> 0.7.0
+- ``ovmf`` edk2-stable202402 -> edk2-stable202408
+- ``p11-kit`` 0.25.3 -> 0.25.5
+- ``pango`` 1.52.1 -> 1.54.0
+- ``pciutils`` 3.11.1 -> 3.13.0
+- ``perl`` 5.38.2 -> 5.40.0
+- ``perlcross`` 1.5.2 -> 1.6
+- ``piglit`` 1.0+gitr (22eaf6a91cfd…) -> 1.0+gitr (c11c9374c144…)
+- ``pinentry`` 1.2.1 -> 1.3.1
+- ``pkgconf`` 2.1.1 -> 2.3.0
+- ``psmisc`` 23.6 -> 23.7
+- ``ptest-runner`` 2.4.4+git -> 2.4.5+git
+- ``puzzles`` 0.0+git (80aac3104096…) -> 0.0+git (1c1899ee1c4e…)
+- ``python3-alabaster`` 0.7.16 -> 1.0.0
+- ``python3-attrs`` 23.2.0 -> 24.2.0
+- ``python3-babel`` 2.14.0 -> 2.16.0
+- ``python3-bcrypt`` 4.1.2 -> 4.2.0
+- ``python3-beartype`` 0.17.2 -> 0.18.5
+- ``python3-build`` 1.1.1 -> 1.2.1
+- ``python3-certifi`` 2024.2.2 -> 2024.8.30
+- ``python3-cffi`` 1.16.0 -> 1.17.0
+- ``python3-cryptography`` 42.0.5 -> 42.0.8
+- ``python3-cryptography-vectors`` 42.0.5 -> 42.0.8
+- ``python3-cython`` 3.0.8 -> 3.0.11
+- ``python3-dbusmock`` 0.31.1 -> 0.32.1
+- ``python3-docutils`` 0.20.1 -> 0.21.2
+- ``python3-dtschema`` 2024.2 -> 2024.5
+- ``python3-git`` 3.1.42 -> 3.1.43
+- ``python3-hatchling`` 1.21.1 -> 1.25.0
+- ``python3-hypothesis`` 6.98.15 -> 6.111.2
+- ``python3-idna`` 3.7 -> 3.8
+- ``python3-jsonpointer`` 2.4 -> 3.0.0
+- ``python3-jsonschema`` 4.21.1 -> 4.23.0
+- ``python3-libarchive-c`` 5.0 -> 5.1
+- ``python3-license-expression`` 30.2.0 -> 30.3.1
+- ``python3-lxml`` 5.0.0 -> 5.3.0
+- ``python3-mako`` 1.3.2 -> 1.3.5
+- ``python3-markdown`` 3.5.2 -> 3.6
+- ``python3-maturin`` 1.4.0 -> 1.7.1
+- ``python3-meson-python`` 0.15.0 -> 0.16.0
+- ``python3-more-itertools`` 10.2.0 -> 10.4.0
+- ``python3-packaging`` 23.2 -> 24.1
+- ``python3-pbr`` 6.0.0 -> 6.1.0
+- ``python3-pip`` 24.0 -> 24.2
+- ``python3-pluggy`` 1.4.0 -> 1.5.0
+- ``python3-psutil`` 5.9.8 -> 6.0.0
+- ``python3-pyasn1`` 0.5.1 -> 0.6.0
+- ``python3-pycairo`` 1.26.0 -> 1.26.1
+- ``python3-pycparser`` 2.21 -> 2.22
+- ``python3-pyelftools`` 0.30 -> 0.31
+- ``python3-pygments`` 2.17.2 -> 2.18.0
+- ``python3-pygobject`` 3.46.0 -> 3.48.2
+- ``python3-pyopenssl`` 24.0.0 -> 24.2.1
+- ``python3-pyparsing`` 3.1.1 -> 3.1.4
+- ``python3-pyproject-metadata`` 0.7.1 -> 0.8.0
+- ``python3-pytest`` 8.0.2 -> 8.3.2
+- ``python3-pytest-subtests`` 0.11.0 -> 0.13.1
+- ``python3-pyyaml`` 6.0.1 -> 6.0.2
+- ``python3-referencing`` 0.33.0 -> 0.35.1
+- ``python3-requests`` 2.31.0 -> 2.32.3
+- ``python3-rpds-py`` 0.18.0 -> 0.20.0
+- ``python3-scons`` 4.6.0 -> 4.8.0
+- ``python3-setuptools`` 69.1.1 -> 72.1.0
+- ``python3-setuptools-rust`` 1.9.0 -> 1.10.1
+- ``python3-setuptools-scm`` 8.0.4 -> 8.1.0
+- ``python3-sphinx`` 7.2.6 -> 8.0.2
+- ``python3-sphinxcontrib-applehelp`` 1.0.8 -> 2.0.0
+- ``python3-sphinxcontrib-devhelp`` 1.0.6 -> 2.0.0
+- ``python3-sphinxcontrib-htmlhelp`` 2.0.5 -> 2.1.0
+- ``python3-sphinxcontrib-qthelp`` 1.0.7 -> 2.0.0
+- ``python3-sphinxcontrib-serializinghtml`` 1.1.10 -> 2.0.0
+- ``python3-testtools`` 2.7.1 -> 2.7.2
+- ``python3-trove-classifiers`` 2024.2.23 -> 2024.7.2
+- ``python3-typing-extensions`` 4.10.0 -> 4.12.2
+- ``python3-uritools`` 4.0.2 -> 4.0.3
+- ``python3-urllib3`` 2.2.1 -> 2.2.2
+- ``python3-webcolors`` 1.13 -> 24.8.0
+- ``python3-websockets`` 12.0 -> 13.0.1
+- ``python3-wheel`` 0.42.0 -> 0.44.0
+- ``python3-zipp`` 3.17.0 -> 3.20.1
+- ``qemu`` 8.2.3 -> 9.0.2
+- ``qemu-native`` 8.2.3 -> 9.0.2
+- ``qemu-system-native`` 8.2.3 -> 9.0.2
+- ``quilt`` 0.67 -> 0.68
+- ``quilt-native`` 0.67 -> 0.68
+- ``readline`` 8.2 -> 8.2.13
+- ``repo`` 2.42 -> 2.46
+- ``rng-tools`` 6.16 -> 6.17
+- ``rpcbind`` 1.2.6 -> 1.2.7
+- ``rsync`` 3.2.7 -> 3.3.0
+- ``rt-tests`` 2.6 -> 2.7
+- ``ruby`` 3.2.2 -> 3.3.4
+- ``rust`` 1.75.0 -> 1.79.0
+- ``rust-cross-canadian`` 1.75.0 -> 1.79.0
+- ``rust-llvm`` 1.75.0 -> 1.79.0
+- ``shaderc`` 2023.8 -> 2024.1
+- ``shadow`` 4.14.2 -> 4.16.0
+- ``spirv-headers`` 1.3.275.0 -> 1.3.290.0
+- ``spirv-tools`` 1.3.275.0 -> 1.3.290.0
+- ``sqlite3`` 3.45.1 -> 3.46.1
+- ``strace`` 6.7 -> 6.10
+- ``stress-ng`` 0.17.05 -> 0.18.02
+- ``sysklogd`` 2.5.2 -> 2.6.1
+- ``sysstat`` 12.7.5 -> 12.7.6
+- ``systemd`` 255.4 -> 256.5
+- ``systemd-boot`` 255.4 -> 256.5
+- ``systemd-boot-native`` 255.4 -> 256.5
+- ``systemtap`` 5.0 -> 5.1
+- ``systemtap-native`` 5.0 -> 5.1
+- ``taglib`` 2.0.1 -> 2.0.2
+- ``tcl`` 8.6.13 -> 8.6.14
+- ``texinfo`` 7.0.3 -> 7.1
+- ``ttyrun`` 2.31.0 -> 2.34.0
+- ``u-boot`` 2024.01 -> 2024.07
+- ``u-boot-tools`` 2024.01 -> 2024.07
+- ``util-linux`` 2.39.3 -> 2.40.2
+- ``util-linux-libuuid`` 2.39.3 -> 2.40.2
+- ``util-macros`` 1.20.0 -> 1.20.1
+- ``vala`` 0.56.15 -> 0.56.17
+- ``valgrind`` 3.22.0 -> 3.23.0
+- ``vte`` 0.74.2 -> 0.76.3
+- ``vulkan-headers`` 1.3.275.0 -> 1.3.290.0
+- ``vulkan-loader`` 1.3.275.0 -> 1.3.290.0
+- ``vulkan-samples`` git (2307c3eb5608…) -> git (fdce530c0295…)
+- ``vulkan-tools`` 1.3.275.0 -> 1.3.290.0
+- ``vulkan-utility-libraries`` 1.3.275.0 -> 1.3.290.0
+- ``vulkan-validation-layers`` 1.3.275.0 -> 1.3.290.0
+- ``vulkan-volk`` 1.3.275.0 -> 1.3.290.0
+- ``waffle`` 1.7.2 -> 1.8.1
+- ``wayland`` 1.22.0 -> 1.23.1
+- ``wayland-protocols`` 1.33 -> 1.37
+- ``webkitgtk`` 2.44.1 -> 2.44.3
+- ``weston`` 13.0.1 -> 13.0.3
+- ``wget`` 1.21.4 -> 1.24.5
+- ``wpa-supplicant`` 2.10 -> 2.11
+- ``x264`` r3039+git (baee400fa9ce…) -> r3039+git (31e19f92f00c…)
+- ``xauth`` 1.1.2 -> 1.1.3
+- ``xcb-proto`` 1.16.0 -> 1.17.0
+- ``xev`` 1.2.5 -> 1.2.6
+- ``xkeyboard-config`` 2.41 -> 2.42
+- ``xmlto`` 0.0.28+0.0.29+git -> 0.0.29
+- ``xorgproto`` 2023.2 -> 2024.1
+- ``xwayland`` 23.2.5 -> 24.1.2
+- ``xz`` 5.4.6 -> 5.6.2
+- ``zstd`` 1.5.5 -> 1.5.6
+
+
Contributors to 5.1
~~~~~~~~~~~~~~~~~~~