deleted file mode 100755
@@ -1,59 +0,0 @@
-#!/bin/sh
-
-PATH=/sbin:/bin:/usr/bin:/usr/sbin
-
-test -x /usr/sbin/ntpdate || exit 0
-
-if test -f /etc/default/ntpdate ; then
-. /etc/default/ntpdate
-fi
-
-if [ "$NTPSERVERS" = "" ] ; then
- if [ "$METHOD" = "" -a "$1" != "silent" ] ; then
- echo "Please set NTPSERVERS in /etc/default/ntpdate"
- exit 1
- else
- exit 0
- fi
-fi
-
-# This is a heuristic: The idea is that if a static interface is brought
-# up, that is a major event, and we can put in some extra effort to fix
-# the system time. Feel free to change this, especially if you regularly
-# bring up new network interfaces.
-if [ "$METHOD" = static ]; then
- OPTS="-b"
-fi
-
-if [ "$METHOD" = loopback ]; then
- exit 0
-fi
-
-(
-
-LOCKFILE=/var/lock/ntpdate
-
-# Avoid running more than one at a time
-if [ -x /usr/bin/lockfile-create ]; then
- lockfile-create $LOCKFILE
- lockfile-touch $LOCKFILE &
- LOCKTOUCHPID="$!"
-fi
-
-if /usr/sbin/ntpdate -s $OPTS $NTPSERVERS 2>/dev/null; then
- if [ "$UPDATE_HWCLOCK" = "yes" ]; then
- hwclock --systohc || :
- fi
-fi
-
-if [ -x /usr/bin/lockfile-create ] ; then
- kill $LOCKTOUCHPID
- lockfile-remove $LOCKFILE
-fi
-
-) &
-
-# wait for all subprocesses to finish
-# this is required when using systemd service as ntpd will start before ntpdate finishes
-# and results in a bind error (port 123)
-wait
deleted file mode 100644
@@ -1,7 +0,0 @@
-# Configuration script used by ntpdate-sync script
-
-NTPSERVERS=""
-
-# Set to "yes" to write time to hardware clock on success
-UPDATE_HWCLOCK="no"
-
deleted file mode 100644
@@ -1,11 +0,0 @@
-[Unit]
-Description=Network Time Service (one-shot ntpdate mode)
-Before=ntpd.service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/ntpdate-sync silent
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
@@ -18,9 +18,6 @@ SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.g
file://0001-sntp-Fix-types-in-check-for-pthread_detach.patch \
file://ntpd \
file://ntp.conf \
- file://ntpdate \
- file://ntpdate.default \
- file://ntpdate.service \
file://ntpd.service \
file://sntp.service \
file://sntp \
@@ -95,18 +92,15 @@ do_install:append() {
install -d ${D}${sysconfdir}/init.d
install -m 644 ${WORKDIR}/ntp.conf ${D}${sysconfdir}
install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d
- install -d ${D}${bindir}
- install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync
install -m 755 -d ${D}${NTP_USER_HOME}
chown ntp:ntp ${D}${NTP_USER_HOME}
# Fix hardcoded paths in scripts
- sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
- sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
- sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
- sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
- sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync
+ sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd
+ sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd
+ sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd
+ sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd
sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace
sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace
sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait
@@ -115,26 +109,21 @@ do_install:append() {
sed -i '/use/i use warnings;' ${D}${sbindir}/calc_tickadj
install -d ${D}/${sysconfdir}/default
- install -m 644 ${WORKDIR}/ntpdate.default ${D}${sysconfdir}/default/ntpdate
install -m 0644 ${WORKDIR}/sntp ${D}${sysconfdir}/default/
- install -d ${D}/${sysconfdir}/network/if-up.d
- ln -s ${bindir}/ntpdate-sync ${D}/${sysconfdir}/network/if-up.d
-
install -d ${D}${systemd_unitdir}/system
- install -m 0644 ${WORKDIR}/ntpdate.service ${D}${systemd_unitdir}/system/
install -m 0644 ${WORKDIR}/ntpd.service ${D}${systemd_unitdir}/system/
install -m 0644 ${WORKDIR}/sntp.service ${D}${systemd_unitdir}/system/
install -d ${D}${systemd_unitdir}/ntp-units.d
install -m 0644 ${WORKDIR}/ntpd.list ${D}${systemd_unitdir}/ntp-units.d/60-ntpd.list
- # Remove an empty libexecdir.
+ # Remove the empty libexecdir and bindir.
rmdir --ignore-fail-on-non-empty ${D}${libexecdir}
+ rmdir --ignore-fail-on-non-empty ${D}${bindir}
}
-PACKAGES += "ntpdate sntp ntpdc ntpq ${PN}-tickadj ${PN}-utils"
-# NOTE: you don't need ntpdate, use "ntpd -q -g -x"
+PACKAGES += "sntp ntpdc ntpq ${PN}-tickadj ${PN}-utils"
# ntp originally includes tickadj. It's split off for inclusion in small firmware images on platforms
# with wonky clocks (e.g. OpenSlug)
@@ -149,9 +138,8 @@ RCONFLICTS:${PN}-utils = "${PN}-bin"
# ntpdc and ntpq were split out of ntp-utils
RDEPENDS:${PN}-utils = "ntpdc ntpq"
-SYSTEMD_PACKAGES = "${PN} ntpdate sntp"
+SYSTEMD_PACKAGES = "${PN} sntp"
SYSTEMD_SERVICE:${PN} = "ntpd.service"
-SYSTEMD_SERVICE:ntpdate = "ntpdate.service"
SYSTEMD_SERVICE:sntp = "sntp.service"
SYSTEMD_AUTO_ENABLE:sntp = "disable"
@@ -159,10 +147,6 @@ RPROVIDES:${PN} += "${PN}-systemd"
RREPLACES:${PN} += "${PN}-systemd"
RCONFLICTS:${PN} += "${PN}-systemd"
-RPROVIDES:ntpdate += "ntpdate-systemd"
-RREPLACES:ntpdate += "ntpdate-systemd"
-RCONFLICTS:ntpdate += "ntpdate-systemd"
-
RSUGGESTS:${PN} = "iana-etc"
FILES:${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/ntpd \
@@ -172,12 +156,6 @@ FILES:${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/n
FILES:${PN}-tickadj = "${sbindir}/tickadj"
FILES:${PN}-utils = "${sbindir} ${datadir}/ntp/lib"
RDEPENDS:${PN}-utils += "perl"
-FILES:ntpdate = "${sbindir}/ntpdate \
- ${sysconfdir}/network/if-up.d/ntpdate-sync \
- ${bindir}/ntpdate-sync \
- ${sysconfdir}/default/ntpdate \
- ${systemd_unitdir}/system/ntpdate.service \
-"
FILES:sntp = "${sbindir}/sntp \
${sysconfdir}/default/sntp \
${systemd_unitdir}/system/sntp.service \
@@ -186,20 +164,11 @@ FILES:ntpdc = "${sbindir}/ntpdc"
FILES:ntpq = "${sbindir}/ntpq"
CONFFILES:${PN} = "${sysconfdir}/ntp.conf"
-CONFFILES:ntpdate = "${sysconfdir}/default/ntpdate"
INITSCRIPT_NAME = "ntpd"
# No dependencies, so just go in at the standard level (20)
INITSCRIPT_PARAMS = "defaults"
-pkg_postinst:ntpdate() {
- if ! grep -q -s ntpdate $D/var/spool/cron/root; then
- echo "adding crontab"
- test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron
- echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root
- fi
-}
-
inherit update-alternatives
ALTERNATIVE_PRIORITY = "100"
The combination of ntpd and sntp now implements the functions of ntpdate, which has been deprecated. Now we don't need ntpdate anymore, and we can use the following command 'ntpd -q -g -x' instead. So drop the related section of ntpdate now. Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> --- .../recipes-support/ntp/ntp/ntpdate | 59 ------------------- .../recipes-support/ntp/ntp/ntpdate.default | 7 --- .../recipes-support/ntp/ntp/ntpdate.service | 11 ---- .../recipes-support/ntp/ntp_4.2.8p15.bb | 47 +++------------ 4 files changed, 8 insertions(+), 116 deletions(-) delete mode 100755 meta-networking/recipes-support/ntp/ntp/ntpdate delete mode 100644 meta-networking/recipes-support/ntp/ntp/ntpdate.default delete mode 100644 meta-networking/recipes-support/ntp/ntp/ntpdate.service