Message ID | 1676878912-15532-3-git-send-email-wangmy@fujitsu.com |
---|---|
State | Under Review |
Headers | show |
Series | [meta-oe] sg3-utils: upgrade 1.45 -> 1.47 | expand |
fails to build with clang - https://errors.yoctoproject.org/Errors/Details/695671/ On Sun, Feb 19, 2023 at 11:42 PM wangmy <wangmy@fujitsu.com> wrote: > > From: Wang Mingyu <wangmy@fujitsu.com> > > License-Update: > delete extra spaces > "Kurt Garloff <garloff at suse dot de>" changed to "Kurt Garloff" > copyright year updated to 2021 > "-10th April 2012" updated to "4th October 2021" > > Changelog: > ========== > - sg_rep_zones: add support for REPORT ZONE DOMAINS and > REPORT REALMS in this utility > - sg_raw: fix prints of NVMe NVM command names > - sg_ses: fix Windows problem "No command (cdb) given" > - fix crash when '-m LEN' < 252 > - guard against smaller '--maxlen=' values > - sg_logs: additions to Volume statistics lpage [ssc5r05c] > - additions to Command duration limits statistics log > page [spc6r06] > - sg_vpd: fix do_hex type on some recent pages > - zoned block dev char vpd: add zone alignment mode and > zone starting LBA granularity [zbc2r11] > - sg_read_buffer: fix --length= problem > - sg_dd, sgm_dd, sgp_dd: don't close negative file descriptors > - sg_dd: srand48_r() and mrand48_r() are GNU libc specific, > put conditional in so non-reentrant version used otherwise > - 'iflag=00,ff' places the 32 bit block address (big endian) > into each block > - sgp_dd: major rework, fix issue with error being ignored > - new: --chkaddr which checks for block address in each block > - add check for stdatomic.h presence in configure.ac > - sg_xcopy: tweak CSCD identification descriptor > - sg_get_elem_status: fix issue with '--maxlen=' option > - add 2 depopulation revocation health attributes [sbc5r01] > - transport error handling improved. To fix report of a > BAD_TARGET transport error but the utility still continued. > - introduce SG_LIB_TRANSPORT_ERROR [35] exit status > - several utilities: override '--maxlen=LEN' when LEN > is < 16 (or 4), take default (or 4) instead > - scripts: 55-scsi-sg3_id.rules remove outdated rule > - sg_lib: add sg_scsi_status_is_good(), > sg_scsi_status_is_bad() and sg_get_zone_type_str() > - pt_linux: fix verify(BytChk=0) which Linux SNTL translated > to write, other SNTL cleanups > - pt_linux_nvme: fix fua setting > - pt: check_pt_file_handle() add return value of 5 for > FreeBSD for nvme(cam) > - pt: new configure option --enable-pt_dummy builds the > library with sg_pt_dummy.c instead of OS specific code; > for experimenting with --inhex= decoding on netbsd > - pt: add Haiku OS support > - gcc -fanalyzer fixes: in sg_pt_linux.c + sg_write_x.c > - sg_pt_dummy.c: add list of functions that a new pt > needs to define > - configure.ac: tweak to accept uclinux as linux > - move some hex files from examples to inhex directory > - major rework of lib/sg_pt_freebsd.c; make SNTL as similar > as practical to the Linux implementation > - add testing/sg_take_snap > - change links to http://sg.danny/cz/sg/* to https > - sg_rep_pip: new utility: report provisioning initialization > pattern command > - sg_turs: estimated time-to-ready [spc6r03] > - add --delay=MS option > - sg_requests: substantial cleanup > - sg_vpd: add Format presets and Concurrent positioning ranges > - add hot-pluggable field in standard Inquiry [spc6r05] > - fix vendor struct opts_t alignment > - sg_inq: add hot-pluggable field in standard Inquiry > - sg_dd: --verify : separate category for miscompare errors > - --verify : oflag=coe continue on miscompares, counts them > - add cdl= operand for command duration limit indexes > - add oflag=nocreat and conv=nocreat : OFILE must exist > - add iflag=00, ff, random flags > - setup conditional auto rule for getrandom() > - add command timeout after comma in time= operand > - sg_get_elem_status: add ralwd bit sbc4r20a > - sg_write_x: add dld bits to write(32) [sbc4r19a] > - sg_rep_zones: print invalid write pointer LBA as -1 rather > than 16 "f"s > - sg_opcodes: improve handling of RWCDLP field > - sg_ses: use fan speed factor field for calculation [ses4r04] > - add --all (-a) option, same action as --join > - sg_compare_and_write: add examples section to its manpage > - sg_modes: document '-s' option (same as '-6') > - sg_sanitize + sg_format: when --verbose given once report > probable success; without --verbose 'no news is good news' > - sg_zone: add Remove element and modify zones command > - sg_raw: increase maximum data-in and data-out buffer size > from 64 KB to 1 MB > - fix --cmdfile= handling > - add --nvm option to send commands from the NVM command set > - add --cmdset option to bypass cdb heuristic > - add --scan= first_opcode,last_opcode > - sg_pt_freebsd: allow device names without leading /dev/ > thus fix for regression introduced in rev 731 (ver: 1.43) > - sg_pt_solaris+sg_pt_osf1: fix problem with clear_scsi_pt_obj() > which needs to remember is_nvme and dev_fd values > - sg_lib: add ZBC (2020) feature set entries > - sg_lib: restore elements and rebuild command added > - sg_lib,sg_pt: add partial_clear_scsi_pt_obj(), > get_scsi_pt_cdb_len() and get_scsi_pt_cdb_buf() > - add do_nvm_pt() for the NVM (sub-)command set > - tweak transport error handling in Linux > - sg_lib: Linux NVMe SNTL: add read, write and verify; > synchronize cache and write same translations > - add dummy start stop unit and test unit ready commands > - wire cache mpage's WCE to nvme 'volatile write cache' > - fix crash in sg_f2hex_arr() when fname not found > - sg_lib: reprint cdb with illegal request sense key > - asc/ascq match asc-num.txt @t10 20200708 [spc6r02] > - gcc-10: suppress warnings > - autoconf: upgrade version 2.69 to 2.70 > - remove space from end of source lines for git-svn > - testing/sg_mrq_testing: new, for blocking mrq usage > - testing/sgs_dd: add evfd flags and eventfd processing > - testing: remove master-slave terminology for sgv4 > - examples: add nvme_read_ctl.hex and nvme_write_ctl.hex > > Signed-off-by: Wang Mingyu <wangmy@fujitsu.com> > --- > .../sg3-utils/{sg3-utils_1.45.bb => sg3-utils_1.47.bb} | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > rename meta-oe/recipes-support/sg3-utils/{sg3-utils_1.45.bb => sg3-utils_1.47.bb} (72%) > > diff --git a/meta-oe/recipes-support/sg3-utils/sg3-utils_1.45.bb b/meta-oe/recipes-support/sg3-utils/sg3-utils_1.47.bb > similarity index 72% > rename from meta-oe/recipes-support/sg3-utils/sg3-utils_1.45.bb > rename to meta-oe/recipes-support/sg3-utils/sg3-utils_1.47.bb > index ac12f9561..fe129b8ed 100644 > --- a/meta-oe/recipes-support/sg3-utils/sg3-utils_1.45.bb > +++ b/meta-oe/recipes-support/sg3-utils/sg3-utils_1.47.bb > @@ -6,7 +6,7 @@ HOMEPAGE = "http://sg.danny.cz/sg/sg3_utils.html" > SECTION = "console/admin" > > LICENSE = "GPL-2.0-or-later & BSD-2-Clause" > -LIC_FILES_CHKSUM = "file://COPYING;md5=f90da7fc52172599dbf082d7620f18ca" > +LIC_FILES_CHKSUM = "file://COPYING;md5=f685699d3ac82f108aa880043fa3feb7" > > SRC_URI = "http://sg.danny.cz/sg/p/sg3_utils-${PV}.tgz \ > " > @@ -14,8 +14,7 @@ MIRRORS += "http://sg.danny.cz/sg/p https://fossies.org/linux/misc" > > UPSTREAM_CHECK_REGEX = "sg3_utils-(?P<pver>\d+(\.\d+)+)\.tgz" > > -SRC_URI[md5sum] = "2e71d7cd925dcc48acb24afaaaac7990" > -SRC_URI[sha256sum] = "0b87c971af52af7cebebcce343eac6bd3d73febb3c72af9ce41a4552f1605a61" > +SRC_URI[sha256sum] = "8673c7faca849b6b34764332d2aa91f72db05bff7382bb836d0688795199c3e1" > > inherit autotools-brokensep > > -- > 2.34.1 > > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#101162): https://lists.openembedded.org/g/openembedded-devel/message/101162 > Mute This Topic: https://lists.openembedded.org/mt/97082178/1997914 > Group Owner: openembedded-devel+owner@lists.openembedded.org > Unsubscribe: https://lists.openembedded.org/g/openembedded-devel/unsub [raj.khem@gmail.com] > -=-=-=-=-=-=-=-=-=-=-=- >
diff --git a/meta-oe/recipes-support/sg3-utils/sg3-utils_1.45.bb b/meta-oe/recipes-support/sg3-utils/sg3-utils_1.47.bb similarity index 72% rename from meta-oe/recipes-support/sg3-utils/sg3-utils_1.45.bb rename to meta-oe/recipes-support/sg3-utils/sg3-utils_1.47.bb index ac12f9561..fe129b8ed 100644 --- a/meta-oe/recipes-support/sg3-utils/sg3-utils_1.45.bb +++ b/meta-oe/recipes-support/sg3-utils/sg3-utils_1.47.bb @@ -6,7 +6,7 @@ HOMEPAGE = "http://sg.danny.cz/sg/sg3_utils.html" SECTION = "console/admin" LICENSE = "GPL-2.0-or-later & BSD-2-Clause" -LIC_FILES_CHKSUM = "file://COPYING;md5=f90da7fc52172599dbf082d7620f18ca" +LIC_FILES_CHKSUM = "file://COPYING;md5=f685699d3ac82f108aa880043fa3feb7" SRC_URI = "http://sg.danny.cz/sg/p/sg3_utils-${PV}.tgz \ " @@ -14,8 +14,7 @@ MIRRORS += "http://sg.danny.cz/sg/p https://fossies.org/linux/misc" UPSTREAM_CHECK_REGEX = "sg3_utils-(?P<pver>\d+(\.\d+)+)\.tgz" -SRC_URI[md5sum] = "2e71d7cd925dcc48acb24afaaaac7990" -SRC_URI[sha256sum] = "0b87c971af52af7cebebcce343eac6bd3d73febb3c72af9ce41a4552f1605a61" +SRC_URI[sha256sum] = "8673c7faca849b6b34764332d2aa91f72db05bff7382bb836d0688795199c3e1" inherit autotools-brokensep